Thank you very much, I used your technique to clean the injector! for years my wife has been eating my head about getting it fixed. I thought it might have been easier to change my wife than the hob but thanks to you, I was wrong. Now I need a story to tell her, it was very difficult dearest, It took me all day.
@tomkatgastraining2 жыл бұрын
Good luck with that 😂
@kbkb164821 күн бұрын
Thank you very much for making this video. I just need to measure the cutting under the gas stove in order to purchase an electric hob. Don't know there is a screw locking it and so many stuff inside, I did it violently, trying to lift up the stove and give up finally. Now I know I'm totally wrong😂
@brendanconnolly83413 жыл бұрын
That's a genuinely great video. Your videos where you get stuck in to actual appliances are brilliant. Thanks for putting in the time Derek
@antonybuckley26454 жыл бұрын
Another brilliant video Derek. Was never shown inside an hob on any of my training
@raul8354 жыл бұрын
Really appreciate these vids.. I've only qualified mid-January and all this helps to consolidate the learning/training we go through on MLP's and shows some things we weren't shown. Excellent.
@BetaboyBuffet2 жыл бұрын
Thank you very much for sharing this info. The injector was clogged and I cleaned it the way you described it and ‘presto’ !
@dublinplumbing97582 жыл бұрын
fair play to taking the time to publish these videos only staring out in the industry and these videos are very informative & Helpful
@JohnSalmon3 жыл бұрын
2:52 Surprised to see that top right gas pipe squeezed on the bend. Is that a method of restricting the gas flow to that particular burner?
@supermick83 Жыл бұрын
Great video. I have bought an old mobile home which I've moved into. I tested the gas water heater which was only tested a few months ago and that works fine. The problem is with the gas cooker. I turned one of the knobs and the gas started coming out but when I turned the knob back to off position, the gas kept coming out. I had to run out and turn off the valve on the propane tank and haven't touched it since after. After looking at your video, would I be correct in saying that the graphite grease may completely dry and preventing the valve from shutting off or am I barking up the wrong tree? I have asked 4 local registered gas installers to have a look but they said it'll be months before they get a chance to call out. I am badly in need of the cooker. Thanks I appreciate your feedback and loved the video. Great detail 👍
@sailajarani41145 ай бұрын
Fantastic tutorial...it would be great if you could mention/ spell out the components and their price too
@willlomas27253 жыл бұрын
Thanks Derek ...more than you realize going on inside hobs!.
@Metaish1012 жыл бұрын
Awesome video. You just saved me an expensive repair call-out/replacement hob.
@riveness2 жыл бұрын
Thanks. Bought a house with a diplomat gas hob and was getting a small amount of yellow intermittent licks in flame (never had gas) but apart from cleaning the top distributors, I didn't want to take top off (call in gas engineer obvs). No need after seeing this.
@mark.e.p3 жыл бұрын
This is exactly what I am looking for. I have a problem with the ignition, sometimes it's on permanently and sometimes it doesn't come on at all? Each of the gas knobs has it's own spark I don't have one common one.
@Gr8Believer2 жыл бұрын
Great vid. Learned a lot. Mine doesnt connect to power to generate a spark. There must be a battery that can be replaced?
@yasinhussain87233 жыл бұрын
Excellent explanation on this gas hob very impressed on the way you have explained it I love all the videos that I have watched so far I am a new trainee keep it up please.
@darrenrobson24863 жыл бұрын
Excellent video. Any tips for an ignitor that clicks and sometimes lights (1 in 100) even after I've cleaned and checked everything on your video and others? Is it a duff ignitor control thing? The oven is a Canon Chichester and is about 15 years old but in great condition otherwise.
@lvupita8 ай бұрын
Thank you! This has been helpful for my studies!
@kimm19102 жыл бұрын
This was very informative video. You covered thoroughly for every parts of the gas cook top. Thank you
@udghkimnbvc3 жыл бұрын
Great video! I have a question. I was recently melting chocolate for a cake, and spilt it over a burner, and now set chocolate has stopped gas coming through the injector. Can i get hot water and a toothbrush to clean this without taking it apart? Again great vid, thanks!
@arianxhebraj61074 жыл бұрын
simply the BEST...wish one day i can be like you. Thank you Derek
@tomkatgastraining4 жыл бұрын
ARIAN XHEBRAJ you will mate it’s just time and practice 👍🏻 it all comes with old age
@HighHolyOne3 жыл бұрын
Appreciate the in-depth education in this video. Thanks!
@alittax Жыл бұрын
You're an excellent teacher, thank you!
@davidc_5 Жыл бұрын
Great in depth video, thanks for sharing your knowledge
@hakimnaamany13664 жыл бұрын
Nice video-Well done-More to be explained on the requirement of thermocouples due to safety features
@hdhanji80064 жыл бұрын
Great tip on cleaning the injectors. Equally useful for injectors on boilers. Thanks Derek
@mpalaskokkalis1476 Жыл бұрын
Με 1 ψυλη καρφίτσα καθαρίζονται τα μπεκ υγραερίου χωρίς λύσιμο βάζεις την καρφίτσα στην τρύπα του μπεκ και ανοίγεις το διακοπτη και ότι τριμουλιδια είναι με την πίεση του υγραερίου θα φύγουν έτσι κάνουμε και εμείς στην μικτή κουζίνα υγραερίου όταν βουλώσει κανένα μπεκ απ τα μάτια υγραερίου τα ξεβουλωνουμε με καρφίτσα ψυλη μετά λειτουργούν οι φιάλες προπανιου βουτανιου ρολόι
@Kris_Angelo2 жыл бұрын
Thanks so much. Any idea what can block the gas if i have already cleaned the hole?
@wokeupandsmellthecoffee2143 жыл бұрын
Excellent tutorial you sure know your stuff. I wish you were my neighbour, I need my gas hob looking at !
@tomkatgastraining3 жыл бұрын
🤣🤣🤣👍🏻
@MrVipulLal2 жыл бұрын
Comprehensive tutorial. Much appreciated. Thanks
@dannyjenko6964 жыл бұрын
Excellent video, what a good way to clean the injectors 👍
@swethabaruah3280 Жыл бұрын
This is an extremely helpful video! Thank you so much!
@paulrossiter95674 жыл бұрын
Brilliant video....just wondering if the gas tap was letting by and readings were found at the burner with with knob in the off position....would greasing the barrel with graphite grease cure this problem also along with making it easier to turn if stiff. Thanks in advance 👏👏👏 Lovin your vids 😄
@tomkatgastraining4 жыл бұрын
paul rossiter it’s the first thing you would do to try and resolve the issue. 👍🏻
@rishikumar50973 жыл бұрын
👍 Thanks,well explained, please advise How to adjust yellow flame to blue
@tomkatgastraining3 жыл бұрын
Get it serviced by a qualified gas safe registered engineer
@brendanmoran95163 жыл бұрын
Great video Derek. 👍
@jakwalker7948 Жыл бұрын
Can an electrician/competent person work on the hob if not touching anything to do with the gas?
@Saaga27273 жыл бұрын
Great explanatory video. Very nice 👍
@neerajshrivastava58673 жыл бұрын
Thanks for nice information 🙏 Pl. Guide how to increase flam to it's full? Thanks in advance 🙏
@NordicExchangeTrading Жыл бұрын
What is an injector? An injector is an electromechanical system in a car that is involved in the formation of air/fuel mixture. This term refers to a fuel injector that injects fuel, but also refers to a fuel system with multiple atomizers. The injector works on all types of fuel, thanks to which it is used on diesel, gasoline and gasoline engines. In the case of gasoline and gas equipment, the fuel system will be identical (thanks to this, it is possible to install LPG equipment on them to combine air and gas). The principle for gas stoves is the injector, an air feed to get the right flame identical, only it works under a certain pressure that is mixed with the gas.
@zaperfan Жыл бұрын
Great instructional video, thanks for posting
@josevilca64934 жыл бұрын
thanks very much the video is nice and very well you explanation how to cleaning and how to need to fix it .
@piotrmarchwacki34144 жыл бұрын
Very useful video. Thanks Derek 😃👍
@oneloveonelifeman4 жыл бұрын
Thanks for the video. Looking forward to getting back in the center soon!
@jimknox83454 жыл бұрын
Nice one Derek very informative just what I needed to know
@mj0n4id364 жыл бұрын
Cool video. One of the burners on my hob doesn’t spark. This video has nicely explained the reason and has given me a good understanding. Thanks Derek 👍🏻Really useful. Keep them coming. I’m catching up 🤓 Asian Jon. Training.
@rammangrolia3793 жыл бұрын
Excellent demo. Thanks
@michaelrose50404 жыл бұрын
Great video. Cheers Derek
@Burncash15102 жыл бұрын
Love your vids keep them coming
@markalmeida38162 жыл бұрын
Excellent video!!! Thank you!!!
@noelmoore44742 жыл бұрын
AS one of my students used to say - "It's volts that jolts but mills that kills"!
@Gr8Believer2 жыл бұрын
I'm following your procedure, at 11:38 when you removed the 2 screws for the valve switch it looks like there's space for an O ring. Mine didnt have O rings, did yours have?
@timmyshah64504 жыл бұрын
Brilliant video always helpful
@jamesmcgilvray63633 жыл бұрын
Brilliant video well Explained
@jimmalcolm29582 жыл бұрын
What could cause small gas leak when the valve is turned off? only one out of four leaks and causes smell ( as detected by leakage detector).
@ek68684 жыл бұрын
Tanx for the upload good informative video plz can you do some boiler fault finding videos👍
@tomkatgastraining4 жыл бұрын
E K I do the inside a boiler case videos that covers the boiler faults 👍🏻
@ek68684 жыл бұрын
@@tomkatgastraining tanx appreciate the content👍👌
@binagarten4667 Жыл бұрын
excellent indepth knowledge
@Ed-fp9rx3 жыл бұрын
Great video
@davidproctor63593 жыл бұрын
thanks, as i always replace faulty hobs, nice to know how 2 fix lol especially if quicker
@ianbrown49394 жыл бұрын
great video derek thanks
@sheilatrant-mccarthy27274 жыл бұрын
does a new gas hob have to be hard wired or can the ignition be put on a plug?, been watching a few of your videos as i need a new one, i found the videos interesting though i dont meddle with gas just like knowing how my stuff works.
@mxhammed3 жыл бұрын
Thank you. Very informative.
@Mr4thetruth4 жыл бұрын
Brilliant video, thank you. How old was that first hob with no fsd or thermo couple safety device?
@tomkatgastraining4 жыл бұрын
Graham M. Lawrence not sure it was one I took out and replaced
@Mr4thetruth4 жыл бұрын
@@tomkatgastraining Thanks.
@naturelover_92114 жыл бұрын
Nice video as always it's very helpful thank you.
@rodwynrhind55733 жыл бұрын
Thank you mate. Very informative!
@ashfaqhussain16362 жыл бұрын
Very good video
@chrisjones45002 жыл бұрын
Thanks Derek..
@michaelrose72583 жыл бұрын
Awesome as always
@christlikekemar24892 жыл бұрын
Great job
@stevereynolds73754 жыл бұрын
Great video as always 👍
@faridratni67994 жыл бұрын
This is excellent video
@Bradwellify3 жыл бұрын
Thomas Bradwell Thanks Derek
@ilexwang7154 жыл бұрын
Hi Derek, have you got any videos on Inbuilt fireplace liked this ? and installation as well? thanks
@tomkatgastraining4 жыл бұрын
Yes just go to our channel and have a look
@v10blogs952 жыл бұрын
Hi I’ve got an issue with my Gas Hob, when cleaning it one day a lot of water got into the igniter switch and I believe that it shorted out so I’ve replaced the igniter switch, and I still don’t get any ignition spark. I haven’t been able to check the plug which may be a blown fuse but I don’t know where the power outlet is in my kitchen for the hob any ideas or suggestions?
@BlackMambaKO Жыл бұрын
I have beki hiz 64120 sx and i took all the bolts and nut off and the upper part doesn't want to lift up. What do i need to take off to get it off?
@rivkiroyde43624 жыл бұрын
Thanks Derek. Benny
@qhero45033 жыл бұрын
Brilliant video thank you
@leonardbalint49304 жыл бұрын
thank you Derek, perfect video
@top-hittv3163 жыл бұрын
Nice and informative
@jonathanfxjjonathanfx7223 Жыл бұрын
I love your training please be my mentor I want to learn more I will pay please
@apurvbose5 ай бұрын
Thank you so much.
@rayl1977 Жыл бұрын
Great job… thank you..
@MamoonBakeer3 жыл бұрын
I want to increase the gas flow rate of the 5th center "Wok" burner of a Bompani freestanding 5-burners model ? Can I drill the hole a bit larger and adjust the air intake accordingly?
@tomkatgastraining3 жыл бұрын
No you definitely can not
@jfarinacci03293 жыл бұрын
Really good vid. Thank you.
@abuwaleed11913 жыл бұрын
Dear, Can you explain where is Air mixer in this Gas hob, as min is giving very high carbon, I could not find Air m mixer to adjust.
@tomkatgastraining3 жыл бұрын
Yeh it’s called giving the hob a good clean. There is no adjustment just cleaning
@arncj183 жыл бұрын
do you recommend with or without thermoelectric?
@tomkatgastraining3 жыл бұрын
Definitely with thermoelectric
@peterruckdeschel446810 ай бұрын
Well explaned
@p.l.pradeepkrishanthadesil97854 жыл бұрын
Thanh you very much. very clear explain
@Azadhindustan-r5s18 сағат бұрын
All types of hob stove repair
@tommyblackman71194 жыл бұрын
Thumbs up and no non constructive comments
@Elysianplains3 жыл бұрын
Excellent
@craigrfoley2 жыл бұрын
I have actually so this is appreciated
@3214569544 Жыл бұрын
Brilliant.
@nagellasekhar Жыл бұрын
Why my same new gas hob leaving stut and yellow flames?
@jelnet Жыл бұрын
My igniter still fires even if the hob is unplugged, why's that?
@ralphhardie74923 жыл бұрын
Brilliant thanks 😌
@arncj183 жыл бұрын
never understood why they always market these gas cooktops performance in kW in the description without mentioning "equivalent" in there, since it doesn't run on electricity except the spark/ igniter.
@tomkatgastraining3 жыл бұрын
I guess you are from the USA ? There are 3412 BTUs in a kw to help you convert it