Whirlpool Electric Washer/Dryer Combo Disassembly WET4027EW0

[@ourme2]

This is my very favorite kind of video, thorough and concise, very helpful and respectful of the viewer's time. Much appreciated, Thank you!

[@repairclinic]

You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!

[@stevewarrene]

Thank you VERY much for this video, last night I came downstairs to a partially flooded basement due to the water from the washing machine pouring onto the floor, turned that off and then spent hours absorbing as much water out of the carpet as I could. Today I watched this video and found the issue and fixed it. Washing machine is now running correctly and I'm working on getting the carpets dry. This video helped me a lot. Thank you again.

[@DrPowerElectronics]

Brilliant! I used this when I did some repairs. Now I am selling it and need to get it down 2 flights of stairs and round 3 corners! I'm going to pull out the tub assembly! Many thanks!

[@repairclinic]

You're welcome!

[@chantals9301]

Thanks to you, we were able to change parts and see how to open the dryer in the right order, we replaced the motor, the belt, the blower wheel, the element and all the seals and foam. We have a new dryer that will last for another 25 years.👍👍👍👍🌟🌟🌟🌟👏👏👏👏 Take care and bless you.

[@davidr856]

Great tutorial wish I had watched for when I took my dryer apart. Really helped with my washer this time

[@dudebro2001]

Wet4027hw0 doesnt have those mefal clips behind the Access panels to detach the washer lid on the back. How tf do i get this lid off. Seemsnlike this is going to be a nightmare

[@toddc2974]

Same problem here! I have an HW0 as well, and it looks like the whole lid is one piece from front to back.

[@kittyselene]

So my washer/dryer says it's this model but it does not look like this. There are no spring clips to take the lid off the washer. I need to replace the washer door lock

[@antonioi9620]

Perfect!!!! I fix the dryer changing the belt like this video took me like 20min cause i dont hat the experience before but are working correctly…. Thanks so much for helo me to save 95$$ only in work hand

[@willholmberg7027]

awesome video/ My washer top does not appear to have any spring clips. do you have any videos of how to disassemble that style(WET4027HWO)?

[@dudebro2001]

I have the same question. Exact same model as yours. Get the point of taking off those fabric covered panels. Then it's just flat on the back. No springs there. Did you ever figure it out? If so how? I didn't want to just start unbolting/unscrewing everything that is in the area of the lid on the back. But I think that will eventually be process of elimination to get it done lol

[@Vancopersian]

Thanks for helping me replacing a faulty blower wheel easily.

[@davidford694]

I have just replaced the dryer belt on my 3.5 year old machine. What had happened was that the retaining clip that is supposed to be on the end of the spindle that carries the pulley on the idler arm had never been installed, and the pulley gradually worked itself out of line, causing the belt to run hard against one edge, which stretched it. During disassembly I discovered that the connection between the vent aperture in the door and the pipe in the machine was out of alignment by approximately half an inch, and thus the entire interior was covered in 3/4 of an inch of lint. It was not possible to re install the front cover without first propping up the drum with a 1 foot 2 X 4, removing the door, and supplementing the screws holding down the top cover to make it stay flat enough to allow the flange of the front cover to overlay it.Overall, only a minority of the screws aligned enough with their holes to allow re installation without the use of a clamp to pull the sheet metal into alignment. I was unable to resolve the misalignment in the venting pipe. For this reason I believe this unit presents a significant risk of fire, and I plan to replace it as soon as possible. My decision is made easier, though certainly not easy, by the fact that the machine has never satisfactorily cleaned clothes. On all but one cycle it is not possible even to get them completely wet. It is not possible to wash dry cloth. I will not be buying an American designed or manufactured replacement. It seems that this country sunk has so far into decadence that it can't even make a decent washing machine.

[@_mattm_]

Thanks! This video helped me get the washer top off my whirlpool thin twin stacked washer/dryer so I could replace a busted lid switch.

[@donnabauerofbrilliancebyde1178]

How did you determine the lid switch was broken? Mine had been working fine and all of a sudden the washer just does not turn on..

[@_mattm_]

@@donnabauerofbrilliancebyde1178 if I shoved the lid down it would turn on again. When I took the top off, I could see the plastic was broken

[@donnabauerofbrilliancebyde1178]

How do I troubleshoot my stackable whirlpool washer will not turn on? It had been working just fine...thank you

[@lumberbuck9671]

Great video ! I have an old Whirlpool LTE6234AW1. (when pluged in) the washer setting control knobI pull it out to start the washer But nothing happens. however if i turn the dryer selector to any setting and depress the power button for the dryer ,water starts to fill up the tub. this is so odd. what part would you think i should replace or what steps to trouble shoot for replacement parts? mucho appreciated

[@cwv9811]

Absolutely awesome video. Well done gentlemen!

[@repairclinic]

You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!

[@Mark-r3f5p]

I have a new model of the WET4027HW0 stackable washer/dryer and the top panel/lid is one piece from front to back and I need to replace the washer lid switch. Do I have to remove the entire upper dryer to get at the lid switch? The video shows a shorter top panel/lid, which is straight forward to remove.

[@ronaldrissel6665]

Yes, I have the same problem; i need to gain access to the 'HW0 insides to replace the suspension rods, and I don't see any easy way to do that, other then completely de-stacking the dryer.

[@burdzyk92]

Is there a video or manual how to replace suspension rods? They are different on regular whirlpool washers(not stackable)

[@cenonsantaolaya8794]

Very helpful video, thank you so much for sharing.

[@cameronwilkey816]

I have the same washer/dryer combo. I have it all apart. The washer was only thing on and it smelled hot and wouldn’t turn anymore. Their doesn’t appear to be a belt for the washer motor so I’m assuming the washer motor has gone bad? Please respond! Would be greatly appreciated!

[@lonnieshifflett8805]

What do you do on the model wet4027hw oh if the top on the washing machine does not slide out like the other ones on the stack owns how do you replace the lid switch

[@dudebro2001]

I have same model. Has no clips to detach behind those access panels. Can't find anything anywhere on the Internet about it.

[@robertcharlesbetz4237]

Great video , I was able to replace the direct drive motor coupler and also clean out all of the dryer ducts and fan

[@yankeegirl2762]

Scanned through this video looking for how to access the lid lock switch to change it. Any suggestions? Thank you!

[@repairclinic]

We have an inclusive library for this models part replacement. You can find this video here: kzbin.info/www/bejne/nKndmqytf5eqepo

[@SusanNelson-x2i]

The piece that connects the hoses to is where its leaking from it’s cracked

[@emileemoses1114]

Is there a way to make the dryer door open from the right side instead of the left?

[@KesLuvs]

I just want to Open the front panel of the washer. Do I really have to disassemble the whole thing?

[@areksoo]

Thanks for the video. It was really helpful in taking the dryer apart. My problem is a loud sound when the dryer is on which goes away after a few minutes. I thought the wheels need replacing but they spin freely. But I did notice the white wheel on the retaining arm didn't move much at all. Would I be correct in my assumption that it's that wheel that needs replacing?

[@kaintaylor3226]

Where is the washer plug on a Kenmore washer and dryer stackable unit

[@gloiban]

Can you please make a video on model WET4027HW0? How do you take the top washer panel off, this model doesn't have clips and there are zero videos and the diagram is too confusing

[@cableguy520]

Did you ever find a solution, i'm dealing with the same problem? i'm hoping the entire dryer doesn't have to come off the top

[@kittyselene]

Did you ever find the solution? I'm in the same boat

[@kimijones8710]

same here :/ it has the clips and the panels and the squiggly clips, but even removing those it didn’t budge an inch

[@j3o5h8n5j5a3y8]

I am also looking for a video about this. I spent some time and removed the back panel. The only way to remove the top cover for the washing machine is to remove the dryer. Wow. This might be easy at the assembly plant, but not in a small laundry room. Now it is a 2-person job.

[@vov6029]

Great information, save me couple hundred bucks, thanks

[@R.J.S.-rr5cz]

Great video. My dryer operates well until the very last part of the drying cycle. When the dryer is hot a loud rubbing sound starts coming out of the dryer. If I stop it and start it. the sound goes away but after a few minutes it comes back. Does anyone know what the problem is and how to solve it?

[@R.J.S.-rr5cz]

I found the problem. When the dryer heated up the blower wheel expanded enough to contact one of the screws holding on the blower housing inlet cover plate.

[@jeremyharris7634]

Have a question I purchased a whirlpool stackable washer and dryer I was told I needed to purchase a 30 amp cord so I did it was delivered today I took off the access panel in the back to remove the cord it came with o believe it’s a 20 amp cord and I can’t find the terminal block

[@susanmckiddy9667]

Model LTE5243DT3 washer fills up and washes, when time to drain will not no sound it is like it is turned off

[@Dreezyinco]

Best video ever!

[@yapmanbeats]

pausing to say Thank u, 1 love.

[@wallyhawaii]

Thanks for your thorough directions.

[@agroncaraku1471]

Hi there, I’m trying to find the heater(element) for whirlpool twins drying model Ylte5243dq0 but I can’t find this model can you please help me with this Thank you

[@agroncaraku1471]

@@repairclinic thank you for your help, but for some reason it can’t find the Model YLTE5243DQ0 which I have

[@agroncaraku1471]

That’s how it showing on the droning machine but I think you are right LTE5243DQ0 then I’m going to try this model hopefully it’s going to work Thank you so much for your help🤗

[@willliu3025]

Thank you for the information al video 📹 🙏🏼

[@Alann648]

Great video thank you so much

[@repairclinic]

You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!

[@NSwen]

I have a Whirlpool compact front load dryer model WED7500VW that I need to change the start capacitor and do not know how to get to it. Front panel screws are too close to the drum to unscrew and back panel supports the drum. Any ideas?

[@Airbender24B]

The narrator has an E-40 flow.

[@RedZone4400]

😂

[@etiennebisset5642]

Thank you very much for this video.

[@123maribel]

How do I replace the stop switch?

[@frnkpol2903]

Awesome video, thank you.

[@pcchiu66]

Very good video,thank you very much.

[@manjusagar733]

Where is available this unit , what's the best price...

[@manjusagar733]

8660408486 my watsup no.

[@anacontreras6438]

It's a pity don't have tutorial gow to raise the water label

[@brendamckenzie5902]

I have the same problem ! Help anyone .

[@guszamora5243]

Removing the lid switch

[@mkalimohamed3849]

Very well done video thanks guys

[@ramonsanchez8193]

Where can I find my washing and drying information if I have one of those types of washing and drying machines

[@dandang3424]

How can I adjust the water level on this model

[@markwetty2269]

I had the same problem, service man said put 5 gallons of extra water in the unit from a faucet. Great design.

[@brendamckenzie5902]

Mark I have the same stackable and the same problem! Does it work ?

[@chrismarshall1152]

i am having the same issue -

[@phuonglemackay2244]

When he said to use a flathead to help detach the latch assembly, does anyone know how...exactly? Maybe I don't know where to push but it's not moving at all

[@LUCAMTire]

Put the screw driver in and push towards the back

[@phuonglemackay2244]

@@LUCAMTire thank you!! And sorry to be confusing, I was warching the "Fridgidaire Affinity Washer Lid Latch Assembly #137353300" video also by Repairclinic.com. The latch is on our right side. He pushed it with a flathead to get it off amd pull it down. That's what I was meant to ask. 😂

[@jessicaramirez1907]

Does the washer have a coin filter?

[@Masod.Feda1]

Great explanation

[@ournturn7512]

thank you

[@jefflatham3247]

BEAUTY....

[@edgutierrez900]

very favorite

[@bethbartlett5692]

Need for washer

[@raymondmeyer923]

would like to see the drum removal; also, thks

[@raymondmeyer923]

looking for washer inside drum removal.. how to remove the spinner nut.

[@RoyerAdames]

One of the most common and important parts is disassembling the washer and dryer so they can fit through the door, and then assembling them again. This video doesn't show that.

[@Istaly17]

You guys skipped the washer lid switch

[@raymondmeyer923]

the washer drum to be more specific

[@ovictorosorio338]

Rogelio llegaste tarde

[@marielletardif8408]

Washing