Whirlpool Front-Load Washer Disassembly, Repair Help WPW10340443

[@mariadoering]

While saying multiple curses while disassembling this appliance to access a mere filter, I do appreciate the clarity of the directions. Thank you!

[@tigerbomb94]

This saved my samity today! I successfully cleared an E1 F3 error by taking apart my washer and clearing out the filter and pump assembly. Thank you for this video!

[@repairclinic]

You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!

[@warrenmcclain1875]

Thorough and informative video . Helped me get my in laws washer cleaned and reaffirmed my stance that a top loading washer with a stainless steel tank at a fraction of the cost is the way to go !

[@kathleencoon5184]

I didn't want to do it, but my son lost his cross on a necklace, and there was only one place it could be. I removed the back panel, and I could see the coin trap/filter to the right on the pump. It was very easy to place a bowl under the cleanout. Very little water leaked out into my bowl. The necklace was there!!! Not every mom can do this, but you can! Only caution: watch the back panel when putting it back on. The edges are sharp and I drew a little blood. Operation was a success!!!

[@leticiagarcia2159]

Is your washer the same as this on the video?

[@stowesuz]

I have the same problem. But I am 74 and live alone. The washer is so heavy that I can't move it to get to the back panel, otherwise I could do this. I have fixed other washers and driers before.

[@suz567]

ok, I got help to get the washer moved and will attempt to do what you did, Kathleen. Thanks.

[@Goustos923]

Thank you so much for showing how to access the control panel. I combined your KZbin video with another one and managed to troubleshoot the problem with my Whirlpool Duet washer. Wow. I will certainly recommend your page to anyone that is in need of a thorough video to assist with accessing the inner components of their washer. And you saved me the trouble of finding a reputable repair person and the money to pay for repair. Easy fix.

[@bharrison3364]

I’m a Maitenance tech and watch repair clinic all the time for info, this video was a lifesaver, 45 minute job.

[@jamespray]

This helped me get into our Whirlpool Duet model WFW9150WW01, although a few things were different (especially: cleanout is in the front, behind a lower panel secured with just three screws!). After 11 years, it suddenly began leaking badly out the bottom and had been banging/walking all over during spin cycles fro a while. Turned out the front gasket had two large tears inside and the dampers were shot, plus the filter was full of rusty shmoo from a combination of lost hair clips, jewelry, dog hair, and a stray drill bit. Total price of replacement parts off Amazon was about $130, opening up enough to diagnose was about two hours, and it took me another evening to replace the busted stuff and button it back up.

[@jrnicholson70]

None of the other videos I found showed how to remove the 2 piece front cover, only the 3 piece. This helped a ton with my Whirlpool WFW97HEXL2 . Thank you!

[@mackenziebates5351]

You saved me hundreds on a new washer! Thank you so very much!

[@repairclinic]

You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!

[@TrangJayLogan]

This video was a lifesaver and I'm thrilled that I didn't need to call a tech to fix my washer.

[@demize7498]

This helped me a lot, thank you. With four dogs, the filter was heavily clogged with hair. I really with this model came with a hatch on the left side to gain easy access to the filter...

[@rob.halpin]

Ahh... So the filter is behind the left panel as you're looking straight at the front of the machine (The panel they didn't remove in the vid)?

[@ngufra]

@@rob.halpin the drain filter in below the drum. it can accessed from the back as well, remove a much of screws, remove the back panel and open the drain pump filter. much easier to do especially if the dryer is stacked over the washer.

[@hasanjafri9466]

Very informative and useful video. It helped my cleanup my front mounted filter and also replenish and cleanup the machine plumbing. May thanks for the systematic and well structured steps.

[@jamesmasters7519]

Thanks. This is a really great video. Short and simple. Well done! This really helped ME fix my washing machine. I SAVED MONEY AND THE HASSLE OF TRYING TO GET A REPAIRMAN DURING THE COVID CRISIS!!!

[@AlizaMeLano-wi4cf]

Thank you for sharing this tutorial. It's the most efficient and simple explanation on how to do the job 👍

[@repairclinic]

You're welcome! If you would like to give us a review, here is our link: g.page/r/CcVUrahZNozMEBM/review Have a great day!

[@KirkIsmay]

I had scissors stuck inside the drum. Your video helped me get them out, thanks!

[@jonathonturlove1734]

Thank you so much for this - exactly what I needed! Whirlpool- why of why must I remove the back panel just to remove the top panel to then remove the control panel and then the front panel just to access a filter?!?!

[@caroleschwartz7395]

This was exactly what I needed in order to clean out my front facing trap. Thank you!

[@mr.g.6636]

I was able to dismantle my whirlpool thanks so much I was so lost.

[@bonniebonnie9388]

If a person is taken apart the washer or electrical device always good to take a picture of how everything was placed before dismantling or removing the parts and screws, that way you can be assured how to assemble the machine together again

[@Christina-dw8we]

Thank you for this video, it's a good start, but I need to clean behind the basket, between the basket and the drum there is bits of metal from something washed that shouldn't have been, and some bits of rags or clothing.

[@workacb8726]

Thank you from Romania! 👍👍👍👍👍

[@duanemcv2638]

Helpful to appoint. Didn’t show where the water pump is for the discharge water.

[@YB-oq6cq]

Thanks for being our dad 😊

[@repairclinic]

You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!

[@YB-oq6cq]

@@repairclinic5/5 🌟🌟🌟🌟🌟

[@marthamunoz1791]

It’s a good video but my washer doesn’t have the same control panel, it’s different is there another video with this model WFW9400SW04?

[@jamesc3695]

This video was excellent. I now know how to disassemble my unit. I was kinda hoping you would talk more about the door latch. I have an E2 F5 error code on a very similar machine, a whirlpool duet front loader. Do you have any videos on this? I believe it may be something with the door latch.

[@jffrywad]

Thank your for another great video. Wish they had that short panel on front. This was a lot of work to clean out a drain. Only hard part was that ring clip. With trial and error I was able to use two clamps at the 6 and 3 position to hold it In better.

[@theinofamz422]

Hello awesome video i have a whirlpool YWFW9050XW00 how would i clean the pump or filter to see if there are any coins? I had a bottom leak and the water is sitting in the drum. Thanks !

[@therapydogsoflongisland8812]

Thank you so much for your time and knowledge. You surely saved me a lot of money. Thanks!!!!

[@stephanieteague6381]

I have whirlpool duet and have a coin ( I think) stuck between inner and outer drum. How do I get to it?

[@seove1]

I had a hard time getting the rotor back onto the stator (splined spindle), after replacing the bearings. Any ideas?

[@MsWatermomma]

Great video for numerous issues, but mine! WFW86hebw1 error codes FO8 Eo1 won't drain...where the heck is the drain filter!??? If this is recommended to clean monthly why not make is easier to access? HELP

[@repairclinic]

The main back panel of these washers is removed to access the drain pump and pin trap filter please click here: kzbin.info/www/bejne/nJnKqXdui8mBirc

[@jamesc3695]

Just subscribed. Love the detailed info.

[@Hk-ew7li]

The washer you are working on. Where is lint trap. I have same one. We have the dryer stacked on top! Does this mean I can't get at it! They showed these as stackable when we bought them!

[@DCFangPi76]

Thank you! This video helped me fix my washer !

[@jaysonfrieberg]

amazing video! Thank-you for posting it......made my life much easier!

[@elijahquoyles2250]

Awesome, great help. Thanks!

[@a89proof]

Curious as to what circumstance would require replacement of the permanent magnet rotor, rather than the wound and powered stator?

[@colinmackie7260]

Thank you so much for posting this

[@ahmedfazzaa5573]

Thanks for post, great job 👍

[@teel72]

I live in an apartment and my dryer is on top of my washer. I would like to open the front panel to investigate a leak I've been experiencing during my washing cycles. It looks like I would not be able to remove the screws holding it in place without taking off the top panel...where my dryer is currently sitting.. is this correct..?

[@samygame4939]

I have whirlpool washer model WFW75HEFWO. My front load water is leaking. I want to buy the water inlet valve to replace the old one. Can you tell me where to buy it? Thank you a lot.

[@j.s.3246]

How do you get to the drain pump and internal drain?

[@ngufra]

drain pump is under the drum. You can access it after removing the front or more simply after removing the back of the unit. twist and pull the pump filter.

[@tapasbose2536]

How to clear the jam problem of drum assembly of front loading whirlpool 7 kg washing machine

[@meghanoleary2103]

Thanks! This helped me clean out my drain catch!

[@purpleduracell]

The easier way is opening the back panel

[@Kennynva]

I just cannot believe that they would make a front panel the WILL NOT, or cannot open without removing the top panel..which BY THE WAY has most of the time a dryer on top of it...unreal..

[@danielstash4305]

These are newer whirlpools kenmores and older whirlpools have a bottom tab so you can access pump speed control or drain plug

[@pattiobrien-or4dd]

Agree!!! INSANE

[@michelletennyson8535]

Yes! I had a version of this one….a whirlpool duet…and not only did you have to remove the top panel but you also had to remove the BACK panel first, then the top panel, and then you could remove the front panel! I just got another duet and you don’t have to take the back off first but you do have to take the top off and I can’t figure out how to get the front off. That’s why I’m here but yes it’s INSANE!

[@carolwarrener4469]

What does the signal light F 20 mean?

[@user-br9nd1zq4o]

Thank you for the video but the filter is the worst on this particular machine. No easy access to the front and not enough room to put a pan/catcher under the filter so all the water just goes on the bottom of the machine

[@mariakeroot3330]

It is possible that my washer is off balance due to heavy hard water deposits inside. I wish this went one step further to show how to remove the drum for internal cleaning

[@shirleytabaha5314]

How do you open the front washing machine when the power is not on

[@mocha_min5520]

Ya

[@c00l0ne]

My whirpool duet washer wont spin but I hear it dranning. What do you think?

[@HectorTorres-lf8xy]

So… how do we get the drum out. I think somehow I got a pen in there. Between the plastic sleeve that goes to the drain pump and the drum. It’s jamming really hard out of nowhere. I think it’s a pen.

[@lyndygattman3966]

my Whirlpool front end loader will not agitate. And that's like it's going to and it's kind of like it's slipped a cog and it quits turning but you can hear something turning and grinding at the same time

[@JohnSheppard-qv4pt]

After installing the back panel of my washer and plugged it in and it popped a breaker what went wrong

[@keonep1]

How do you adjust the water level on this model? I've seen videos of people being able to turn a screw on the water level sensor but this model doesn't have that same sensor. There are no screws on it to turn. The service manual says water level should be 2.5 - 5 inches and mines is like 1/4 to 1/2 inch of water. I can't get campfire smells out of my clothes no matter what cycle I choose.

[@donosborne484]

The WFW72HEDWO Washer came new in the manufactured home we bought. The warranty was out before we even moved into the home. We have had 4 different appliance repairman look at this top loading washer and it still does not clean my clothes. There is never enough water in it to wash them properly. I have used it a total of 10 times and I will never purchase another whirlpool product. Just had to get my 2 cents in.

[@markwhitson]

Hello, what would be the part number for this model of door boot seal? Thanks!

[@markwhitson]

@@repairclinic thanks for the help!

[@marcburgess76]

I have a whirlpool duet washer 9700. Turns on fine but when I push the start button beeps 3 times and doesn't start. No error code. Cycled through old error codes and f17 is the most recent but think this is not relevant

[@ngufra]

A spring expansion tool will make removing and reinstalling the spring around the gasket much more easy and less dangerous.

[@grand_designer]

Do you have more specific steps, we need to replace the large seal right at the front of the washer

[@esmatullahsidiqi1767]

Hi boss I have whirlpool washing machine The model Nambar wfw8500sR03 I need spot for that like power bord if you have that how Mach is it please

[@sonyawright4927]

I have a Whirlpool front load washer WFW 8500 SR 00 (HLT 4006456) when I shut the door to wash clothes it will stop and click and it does not fill with water. Is this an easy fix?

[@richkoch407]

I was seeing a E1F9 codes . I cleaned the trap and made certain there was no blockage in drain hose. Machine worked for 5 loads. I received the same error codes on the 6th load. I drained all the water and ran spin and drain received error code SD. Tried to reset, pressed too many buttons now no LED lights on and I have a humming sound similar to a motor trying to start. Any suggestions what to do next?

[@chingwa14]

How would I be able to remove the side panels for dent repair???

[@a89proof]

The side panels are permanently affixed to the base of the cabinet during manufacture.

[@WarLordPsycko]

Hello , ive got a question , i hope someone in the thread is still active .... i have a duet combo , and wanted to know if wne i fill the bleach / fabric softner area in the pull out drawer and close it , the fluid seems to leak into the washer right away , is this common ? or is there an issue , thanks

[@devonmatthews3827]

No power or display after a pop sound. On whirlpool front load. What may be the problem?

[@michaelschwerin5353]

I just had the same thing happen . Did you figure out the problem

[@casemods]

How do I replace the bearings?

[@tedrosner5849]

Me too. It's unbearable to live with plus the load times are taking much longer than stated. I really don't want to call my landlord,

[@spears5454]

How do you get to the filter if your washer is holding water and most likely has animal hair in it. . I don’t see this on this type of washer. Mine is just like this one.

[@celestevoss6624]

Mine keeps giving me a F21 code…I have replaced the pump and the inlet..I’ve checked for clogs still F21. Sometimes it will give me a sud code. Any ideas? I’m stuck and don’t know what to do…I hope someone on here can help me. Thanks in advance 😊

[@feliciagarcia7968]

What model is in the video?

[@george5120]

Most failures will be with circuit boards and LED menu displays. This video only discusses repair of manual components.

[@haroldwelty8256]

I took top off, removed cleaner drawer and two screws, removed both screws at top sides, THEN as you easily lift up the control panel...well, mine doesn't lift up at all, pulling hard does nothing. you mention tabs but I don't see that they connect or are holding anything. very frustrating.

[@valeriestanley6805]

when pressin control and start button its been hit and miss sometimes turns on sometimes doesnt

[@elite_online_rowing_coach]

Unbelievable that there is no little door on the front panel of our washer to open and simply clean out the drain filter. This was done on purpose. Bloody.

[@elite_online_rowing_coach]

I am going to cut a hole into it!!!!!

[@Ne3s23p2]

What kind of microcontrollers are there in Whirlpool washers ? Since the warranty of mine expired (a TLDR60210), I want to develop a replacement firmware on a development board before it fails. I need to redesign the firmware because it does not fit well our clothes nor the environment-friendly liquid soap that we use, and integrate the washer in the home automation network. It seems those white goods became too overengineered towards contests for the maximum water savings with harsh chemicals, and only high-end ones have an inlet for hot water, preventing others from a direct connection to a renewable energy water heater.

[@lunaandkyotonmaylof824]

how do you access the drain pump on this? I keep getting e1 f9 on this exact model..I could really use some help.

[@rake7195]

You'd access the drain pump from the rear of this washer.

[@BradTefft]

where exactly? Do you need to remove the rear panel?

[@repairclinic]

The main back panel of these washers is removed to access the drain pump and pin trap filter please click here: kzbin.info/www/bejne/nJnKqXdui8mBirc

[@kristianblanchard6413]

I TOOK THE WATER INLET VALUE OFF TO REPLACE IT.(MIND HAS THREE VALUES). I FORGOT TO TAKE A PICTURE OF WERE THE WIRE SEQUENCE

[@moretacos1]

I didn't see the coin trap/filter that always clogs on the inside of the unit. Did they ditch it on the latest generation?

[@paulaburchett8917]

moretacos1 washer fills with water when it's off

[@repairclinic]

The main back panel of these washers is removed to access the drain pump and pin trap filter please click here: kzbin.info/www/bejne/nJnKqXdui8mBirc

[@kengamache3881]

No, it is integrated in the drain pump unit that you access from the back. The filter is on the right of the unit when looking from the back. Turn counterclockwise to remove.

[@cathaleenziebell143]

How don't unlock a whirlpool 6sense front loud washer, I've got a tub full of towels an I think that the reason it won't be unlock

[@AZPaul48]

I disassembled mine to clean it out, but used a drumel tool to put a door in for the next time.

[@jeffbickman7430]

I need to replace a fin inside the drum. Any ideas?

[@thelittledojo]

how can I mechanically unlatch the door latch

[@bobbyhernandez5594]

thats what im looking for!

[@jacquelineglass5345]

How much are the brushes for whirlpool washing machine it is flashing F6 6th super co sense

[@mariel.4566]

How to replace drain pump?

[@Countryliving_Drifter]

Has anyone had this problem!? We were washing clothes and had a power outage. Clothes are locked in and when you turn power on it shows no display unless you spin the cycle nob around. We tried the drain spin cycle, nothing works. Any help would be great. Model # wfw95hedc

[@marjorieyeager8959]

My washer will not unlock. Now it won’t even turn on. I’ve unplugged and let it sit and then replugged it back in. Still nothing what do I do?

[@ingridcharlene1]

This happened to my machine whirlpool duet. It needs the motherboard to be replaced. We've decided to buy a new one

[@pamelamerritts5526]

How do you unlock it it's locked I can't open it

[@lloydrefford2900]

Got a frontload whirlpool washer Model #LHW0050PQ4 door will not lock

[@billwicker4143]

is there a time delay

[@uawsux]

If you have an E1 f8 on a Whirlpool Duet replace the hose on the water level pressure switch you most likely have a pin hole in it

[@Shayaan001]

I have this washer,the problem with it is that durinig laundry it start making the beep sounds showing "Lo" Fl" and nor it won't stop or anything so i have to unplugged it & now the door is locked & i don't know what to do ??

[@heal0152]

Mrs. Shayan Did you turn on the water flow so water can access the machine? That happened on my Whirlpool AWM 6122..

[@nonanormie5427]

What is maximum kilo load per wash amw355-600

[@barlowetube]

Drain catch?

[@fullmetalmidget]

what about the drain pump in the back

[@stowesuz]

How do you get to the back of your machine? Do you have two big men to move it so you can clean the drain pump and find all the tidbits of jewelry, coins, screws, hairpins etc that are collecting there?

[@a89proof]

@@stowesuz I'm not sure how anything that large can get through the tiny holes in the tub and make it to the drain pump?

[@chilliebish6659]

*Where is the drain pump filter door ? :(*

[@MsMightyBe]

Exactly! Where do we clean out the drain pump? mine is a wfw95hedco front loading steam.

[@repairclinic]

The main back panel of these washers is removed to access the drain pump and pin trap filter please click here: kzbin.info/www/bejne/nJnKqXdui8mBirc

[@stowesuz]

In the back. Isn't that convenient! I can't even move the machine to get to it to clean it out! It's too heavy.

[@austindakotamillsaps1132]

theonlysuz Right on.

[@ladykiller0005]

I have this exact model I am getting error code F7E9 can you help

[@angelj7052]

hi one question how to daley the time on the washer I need you help please

[@smaganas]

I guess there is no easy way to retrieve my lost socks

[@selwynjacobs]

No they are not inside the washer. They are in another dimension now.

[@jwadhwa]

So I have a Maytag MHW5500FC0, and the water isn't draining properly. I was hoping this video would have shown where the drain pump/trap is so I can see if that needs replacing. Thoughts anyone?

[@a89proof]

I can't say for certain, but it may be located toward the middle or rear at the bottom of the unit. The owners manual isn't at all helpful, but the parts schematic appears to show that there is a filter within the pump with may just need cleaned out. It doesn't appear that they've made access to it easy, though.

[@colleenwillis5070]

How do you clean the trap on this unit?

[@repairclinic]

The main back panel of these washers is removed to access the drain pump and pin trap filter please click here: kzbin.info/www/bejne/nJnKqXdui8mBirc

[@bobbymelvin7850]

RepairC linic.com

[@stowesuz]

That video is for replacing the pump not for opening the drain pump to find missing jewelry etc.@@repairclinic

[@stowesuz]

what is that? @@bobbymelvin7850

[@stowesuz]

@@bobbymelvin7850 what is clinic.com and what does that have to do with this?

[@susanridder6426]

Does anyone have a readable picture of the whirlpool , Model #WFW9400SZ01 v Serial #CSU2812513 ?