Why? G-Wolves HTR for $160??

Idk why we are not calling it as it is anymore… this mouse is a tiny piece of plastic that feels cheaper than some budget mice from mechkeys. Take it as it is but I will 100% tell you to never buy this for full price. EVER.
#gaming #review #pcgaming

[@theAzeo]

Love the honesty man.

[@RyseShineReviews]

I try haha I don’t want people wasting their money on something that should be tops maybe $100. I’d rather yall spend your money on like a razer viper v3 pro at this point

[@aohjii]

does the angled back side buttons affect your aim when trying to press them while aiming

[@RyseShineReviews]

Yes, there should not have been any side buttons on this mouse especially since they made them so tiny haha

[@aohjii]

@@RyseShineReviews if we were to still want side buttons do you think having them positioned more forward would at least provide more stability than the current way its positioned?

[@RyseShineReviews]

@@aohjii I’d say so yeah moving your finger forward will still grant more stability than backwards. But I’d want a slightly different design for this mouse. Make it taller, so there is more room for your thumb and so you can make slightly larger side buttons.

[@aohjii]

@@RyseShineReviews I agree, I suggested on their discord server that the front of the mouse be lifted higher exactly for that reason, to have more side wall surface area for the thumb = more room to grip = more control , and there is no reason for a rear hump because its a finger tip mouse Thats why i think most fingertip users like the G Pro Superlight so much because it doesn't have rear hump based on the way you would hold it, and it has very flat and very wide side walls If only there was a mouse that took those elements to make a mouse that reduces the length of mouse but keeps that same width

[@RyseShineReviews]

@@aohjii I do have the darmoshark m5 coming while it’s a different shape I’m excited to see just how it feels

[@t3ngrist620]

love the size. but not paying 160 for it. 80 maybe

[@RyseShineReviews]

Exactly

[@stefanomartino2539]

bruh, it got an 8k sensor, in what world you can buy such high tech for 80 bucks -_-

[@t3ngrist620]

@@stefanomartino2539 well 1k is far more enough for me so i would never pay gor marketing that wont make any difference for my use and porformance, even in fos games that enjoy

[@RyseShineReviews]

@@stefanomartino2539 I have like 5 other mice I got under $100 that has a 3950 and can sit at 8k perfectly fine.

[@stefanomartino2539]

@@RyseShineReviews lala land

[@Hemi790]

You like mice that don’t flex at all anywhere and it’s the thing that matters the most to you ,ok. But why are you buying a mouse with a lot of holes in it then? Just buy a g502 you would be really happy with it.

[@RyseShineReviews]

You can still have holes with 0 flex🫡

[@thetrueshameless]

Doing flex test on the tail end there is the dumbest shit I've ever seen. Stay in your hater bubble, it's wild.

[@RyseShineReviews]

Joined YT two months ago, makes a troll account, sucks off gwolves (I’m guessing) has 0 clue at all. When the mouse its tiny af and you’re limited to where you can even hold someone is gonna feel that flex. Keep spending money on shit gear 🫡

[@thetrueshameless]

@@RyseShineReviews Comedy is, you just spend money on said "shit gear", here you left this 🤡

[@MrBayeasy]

​@@RyseShineReviews I mean to be fair that area isn't really meant to be gripped especially not with actual force. It's kind of the same mentality that pushing down on the top if the HSK Pro's back hump you can get it to flex with force but its more force than you would ever use and you would never be coming into contact with that part of the mouse anyways. I do understand your point though, but unfortunately if you want an ultra lightweight mouse it's going to come with some structural integrity compromises the lower the weight is. These mice are sub 30g, you're not going that low without compromise, and that low of a weight feels fantastic when fingertipping. I don't mean any hate, but I did think that part of the video was a bit silly. They absolutely shouldn't cost as much as they do though, if the Keychron M4 could do their fingertip mouse at $50 for 1k, and $70 for 4k than gwolves doesn't have an excuse charging over $110 IMO, even though I think their shapes are superior to the M4 and they achieve lower weight. As you mentioned these likely cost next to nothing to make, especially mass produced. Thanks for the review either way, not too many reviews up of this of someone who didn't like the mouse.

[@RyseShineReviews]

@@MrBayeasy yeah with everyone slapping that silly clay on it to make it better I find to be insane. And this mouse shouldn’t cost anything like it does. But the only integrity on the side that it had was the pbc. If that wasn’t holding the wall then the entire side would cave in. Idk I just don’t understand how people can suggest something that expensive when there are other options. Ya may not be as light but still sub 40g is very light lmao

[@MrBayeasy]

@@RyseShineReviews Which I think is a smart move, more companies should use the pcb as support because it really firms up those contact areas, that is a weight saving feature I agree with. I think it mainly just comes down to shape and weight, most people understand they are buying a very niche product that has compromises and you willingly forgo some things to achieve an extreme result. Kind of like how supercars are made to essentially be death traps with how light and thin their material is just to achieve that extreme result. They won't win any safety prizes, but they sure do go zoom real good. Doesn't excuse the price though, if anything the lack of material here only further calls into question how they can justify charging that much for something that is essentially 1/2 to even 1/3 of a normal mouse. I actually like gwolves products, the hsk pro is probably my favorite mouse (tied with the Op1 8k), however I feel that they really could use an improvement in customer service and especially their pricing. These are made in China on top of that I'm pretty sure, their profit margins must be through the roof. Definitely not a customer focused business, unlike End Game Gear and all their pro consumer features they have in their mice, and all for literally half the price of gwolves flagship mice lol. Hopefully you can still enjoy the mouse for what it is, think of it like a super car and not like a Toyota lol. I'll bet you'll still be able to find some enjoyment out of it, provided you vibe with the shape.

[@sentinalo]

Yeah i feel like unfortunately for the top tier niche fingertip mouse that are like super small unfortunately theyre just going to be super pricy whether if its the m2k, hsk, PMM mods etc. Ususlly they dont come as its worth at all. Only a select few of people buy them for specifically the shape and weight

[@RyseShineReviews]

Which doesn’t make sense cause a lower price can get way more people into the fingertip mouse game lmao this is just hurting them in the end

[@sentinalo]

@RyseShineReviews yeah it's torturing the fanbase & usually that's not how the law of supply and demand works

[@sentinalo]

@@RyseShineReviews pmm aim 8k, 20 g fingertip mouse, 273 USD 😭

[@RyseShineReviews]

@@sentinalo it’s disgusting lmao