WHY HEADLIGHT NOT WORKING LEFT RIGHT MAZDA 2 3 5 6 CX-3 CX-5 CX-7 CX-9

[@ElectricalCarRepairLIVE]

Products that we use and recommend: ► Replacement Fuse Big: amzn.to/40DFA5U ► Assorted Fuses: amzn.to/4fx4s3F ► Panel Removal Set: amzn.to/3YiMADu ► Tool Set: amzn.to/3p5MM6t ► Screwdriver Set: amzn.to/3XRB28Q ► Mobile 1 Oil: amzn.to/3xBc8B9 ► Oil Filter: amzn.to/3w0Ulme ► Torque Wrench: amzn.to/32qyRwg ► Liqui Moly Engine Flush: amzn.to/3IiDBID ► OBD Scanner that we use most often: amzn.to/3I4MQfe ► Voltmeter: amzn.to/4hB6Zvk ► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics

[@quarkymatter]

My dad spent almost $200 trying to fix my sister's headlight. I watched this video and fixed it for $5. Thank you 🙏

[@GlasgowBila]

I had 6 pair of bulbs nothing worked. But after seeing your video I quickly realized fuse. Your correct So had to come back and write a review. Great Professional Help Thanks alot guys keep up the Good work. Really appreciate it all the way

[@GlasgowBila]

I have a mazda 6 2007 2.0 GG

[@mahinda105]

Thanks lot.Very good information and very clear discripson.Well done sir👍👍👍

[@variant4858]

What if the low beam light is not working and the bulb is new and the fuse is good? Would you advise to replace the whole headlight assembly or just the ballast if that were to be the problem?

[@desiguy5508]

Did you figure out the answer to this question?

[@josejuarez2452]

Hi you ever find out?

[@variant4858]

@@josejuarez2452 Nope. I traded the car for a new A/C unit for my house. It needed more than a light bulb to fix it

[@McNaireXstream]

Thank you very much! Subbed!

[@harrymanback5161]

Cheers bro helped me out heaps! Mazda 3 Australia!

[@constancetanoa4549]

Bulbs working. Fuses checked👍🏻 light still not going. Are you able recommend what it could be?

[@dailyapexlegendsbattleroya7673]

was your issue resolved?

[@KIVagant]

Nice. In my case a new fuse died immediately after replacing, and then another one. So it is not enough to replace it, sometimes it is useful to know why they are burning out.

[@diesel5355]

Why was yours burning out?

[@KIVagant]

@@diesel5355 , I am not an expert in cars at all. I ended up going to a car service and they had to replace some thing that is attached to the front light. The light bulb was okay (and I bought 2 more thinking that it burned out). In total the repair costed me something around $600-700. Unfortunately I have forgotten the name of that component they replaced, but since then lights are working well.

[@dorianguizado1048]

I have the same problem. Could it be the ballast that was replaced in your car?

[@markholland273]

What about the daytime running lights not working But the high beams work well 2014 cx5 Please And thanks!

[@ThaboTsotetsimatzo]

Hi. On Mazda 2, 2008 model. only low beams not working. The Hi beams are owk. Are there any fuses for low beams on mazda 2. i have been checking with no luck. thank you

[@barryhunt6252]

Hi I have a 2011 Mazda 6 five door hatchback and have a fault on the front windscreen washer motor when using the controls on steering column. I’ve changed the wiper control arm the motor checked the fuses but still won’t wash. Is there a relay that needs checking in the circuit? Thanks

[@brittperez7325]

Hi, what if both headlights go out? I’m asking for my brother

[@JosiahNorcutt]

Mine did the same, and I replaced all bulbs and fuses, I have been officially been defeated by a headlight😭😭

[@dantepraxedis]

The thumbnails appear just in the moment you turn on the lights. Anyway, thanks

[@ivanmanzo9207]

If u replaced ur beam, fuse and still nothing, check for power at the ballast connector, if u have good ground and power, u have a bad ballast.

[@jimwhitt7815]

You are an amazing mechanic, I only watch your videos when I need to repair something. I'm from Alabama, USA, and I have a hard time understanding you. I know there's nothing you can do, that is the only not great thing about this channel. I guarantee you that if you heard my backwoods, country boy accent, you wouldn't be able to understand me. LoL!!!! Great content, keep it up!

[@javichulo9911]

Turn on your CC and read what he says….

[@tehxii7706]

What if the low beam on the right side of an 07 is on but very very dim. Still the fuse box?

[@jesuscruz920]

Hi my low beam lights work ok but after few minutes the driver side low beam light goes off, then i turn off the switch and turn it back on and it works and then after few minutes goes off again,do you know what it can be?

[@blossomlpisa9369]

I have the same problem. Can't seem to find the problem. Let me know please when you fix it so I can try it too? Cheers

[@frankbednarchek1481]

Me too

[@gabrielgrigorov1987]

i have an 07 Mazda three, the left low beam goes out randomly and if i smack it it turns back on. Thoughts?

[@HolisticClips]

Loose connection or ballasts are going bad

[@davidvelasquez7639]

I had my Mazda 6 re wired at the local Mazda dealership and the head light only worked for probably one month, and the car would stay turned on till it would go off and on i am still trying to figure out why it is doing that.

[@Kalazzara]

Thank you

[@ulisedobranis3916]

On my 2016 CX5, is not working when the switch is on auto position, and have a yellow warning on display.

[@djramirobtemaj4716]

Como soluciono mi Mazda cx5 luz intetmitente derecha no funciona de enfrente y atrás

[@maries6530]

I have an 07 CX 9 and the right low beam went out. Changing the bulb didn't work. The fuse was blown. Changed that also and it still doesn't work. New bulb, new fuse and still doesn't work. Any ideas?

[@JosiahNorcutt]

I am in the same situation as you😭😭

[@maries6530]

@@JosiahNorcutt Hi. I was told a new assembly was needed. The cause was a crack in the light. Water eventually got into it and shorted out the light. When it arrived, the cord it came with to plug the light back in, was way too short. So, they, (shop) ended up, not using the new assembly. They completely dried out the assembly and the low beam started working again. They asked me for permission to just seal up the cracked light. As long as it saved me money, I was fine with it. We just sold it last summer. Right after that, everything started going wrong with it. Got one thing fixed, something else happened. Hope you have better luck with your Mazda.

[@lambtron4605]

about to fix my fuses as well

[@fdghn4567]

Does anyone know where the grounding points on a 2007 1st gen Mazda 6 are? My bulbs are good and I swapped the relay to rule that out, the fuses are good too. I would bypass the switch to check it's not that if I knew the colour codes for the low beam. The problem is intermittent so it's got to be a loose connection somewhere I think.

[@roccomotlagh4773]

Any luck? Mine started the same problem last night?

[@fdghn4567]

@@roccomotlagh4773 Hi, I never got to the source of the problem, ended up scrapping it after the engine went runaway. I did wonder if the ballast was playing up though.

[@canismajoris738]

What year model & make of Mazda are you talking about? I have a Mazda 6 2005.

[@matthewstevenson1267]

Bro I put a used ballast, then a new ballast, igniter, bulbs etc. Fucking 15a fuse 😂😂fml. Thanks for the video. First HID vehicle I've owned. Never had 4 fuses for 2 headlights before. Assumed since 3 out of 4 worked it wasnt a bad fuse.

[@yusefmccoy8869]

I have a code that came up on the diagnosis for my 2007 Mazda CX-7. U0100. Any idea on how to resolve

[@claymiller2141]

Not all Mazda's have the same fuse box locations. This is not helpful for all Mazdas as he states in the video.

[@gabidunca]

Your English, man.... I am struggling to understand something, beside "guys"...

[@ejk20111]

discriminate much? he is from another country and not a native speaker. if you travel anywhere outside of continental USA, you might learn a few things about that.