Why Is There Low Water Level In The Toilet Bowl and How to Repair?

Toilet water not refilling? This video shows how to fix low water level in your toilet. If toilet water level adjustment is beyond possible you might need a Korky complete repair kit.
Korky Premium Complete Kit used in video can be found here: amzn.to/2mfheyo
Manufacturer video showing how to calibrate flapper settings: • How to install a Compl...
#lowtoiletwaterlevel #korky #howtofixatoilet

[@carmenf6844]

Thanks, clear explanation and you follow the manual....I love that!

[@christopherkoch3327]

Sir, fantastic information/ instructions on this particular subject, especially for those who struggle with home repairs. Thank you very much.

[@fengshuilifebydesign]

Thank you for the detailed explanation. I got it. Going to now go and check whether the inside is leaking or whether it's just an adjustment required to be made. Either way, I know what to do now. Thanks again!

[@donnamcconnell9541]

Very well explained and filmed...thank you!!

[@trishbaby1001]

Your drummel idea would have been soo helpful when I did mine. It was quite the pain in the A$$ to get that off. But used snips and got it clipped off carefully enough to get it off.

[@KAR0519]

Thank you!

[@MyKitchenCorner]

Awesome tutorial, very informative.

[@DIYAroundTheHome]

Thank you!

[@thecapone45]

Not sure if you already addressed this, but would any of this fix a problem with the bowl water level lowering after the flush is complete? I turned off the water supply to the toilet to see if there was a leak. There wasn’t. Water stayed in the bowl but no matter how high I turn the dial to get more water in the bowl, water will not stay at that level. It slowly lowers to a certain, almost “pre-set” level.

[@PanamaSticks]

There's absolutely no reason that the flush valve has to be positioned at the angle shown. The chain on the flapper only has to reach the lever.

[@randylawing5568]

Why was the water low ? What was the prob

[@DIYAroundTheHome]

The old components needed their settings tweaked so more water was diverted to the bowl (and less from the tank) but since the components were old and brand new ones were cheap, we installed all new ones then showed how to tweak the settings to make sure the bowl got enough water before the tank filled up and turned off the in flow of water

[@nimster64]

Good info. Quick question how do you see how much the project is going to cost? I tried and it says to send my email so that they can send a contractor out. But I just want to see how much it will cost me to see how much I am saving. Thanks

[@DIYAroundTheHome]

Do you mean when I look at websites like HomeAdvisor.com?

[@nimster64]

DIYAroundTheHome yes

[@DIYAroundTheHome]

I typically Google search "cost to repair X" (X being whichever task or job it is). Home Advisor usually shows up towards the top of search results and when you click it their link usually takes you to a page where they list the average cost range nationally.

[@nimster64]

DIYAroundTheHome I tried that but not working for me. Once you are in home advisor what do you click to see the prices

[@nimster64]

DIYAroundTheHome it just says enter zip to compare quotes from contractors

[@chicagomike]

You are serious right

[@dawnsteves734]

Why would you remove the tank ! That is totally unnecessary

[@DIYAroundTheHome]

It was a complete refurb kit. I could have kept the 20-year-old parts that we're working at the moment or I could replace them with brand new parts that came with the kit I had purchased. Only took a little bit more time, in my estimation totally worthwhile. Toilet has worked flawlessly all these years after

[@jamesmcgowen4428]

I'll probably just buy a new toilet😊

[@rodneysmart9774]

"how to fix" ...... spend money

[@MonrowNephewHerrod]

17 mins to tell us how to fix a toilet

[@DIYAroundTheHome]

Glad you found it helpful

[@camabis-uw2lm]

Sorry I can’t watch all this so can anyone just tell me in a few sentences what the problem is so I can fix it?

[@DIYAroundTheHome]

The parts that make your toilet work are not optimally working or have gone bad. Replace them with a cheap kit like you see in this video and your problem is fixed