I had too cut the tube just too get it out thanks man!
@jnew6808 Жыл бұрын
No wonder 🤦🏽♂️ thank you......
@genericdude65512 жыл бұрын
I came across a service manual that indicates that the fuel can be siphoned out through the fill tube by using Fuel Tank Drain Hose 310-F013. It must be obsolete since I can't find anyone who sells it but there is something similar : Rotundra 310-102 Fuel Draining Hose and Adapter Kit - But it's ridiculously expensive ($286). I wonder if anyone has tried using that kit.
@paulciprus95823 жыл бұрын
Geez...a lot of imports have a drain on the bottom...makes it a lot easier to drain the tank....😀
@vilebastage4 жыл бұрын
Your videos are awesome and helpful. I got an 04 Cobra for my wife back in Feb/March. I think the fuel sending unit just went out. I purchased a Fore Kit (non-return style / we won't run E-85), and plan on replacing the Fuel Sending Unit using one of your vids as a guide. Thanks, bro.
@matteovanzant270 Жыл бұрын
My 89 mustang had a piece of metal horizontally made into the fill neck
@destruxandexploze25523 жыл бұрын
If the fuel pump is bad it’s not gonna prime it
@genericdude65512 жыл бұрын
Too bad there are so many gas thieves around these days. I need to replace my defective fuel pump in my 02 GT that has 3/4 tank full of gas. Even if I drop the tank with all that gas in it, I still need to remove the gas so I can clean the tank as recommended by Delphi. Can the fuel filler be moved out of the way enough to get a siphon hose into the tank without dropping the tank?
@SGTRacing4 жыл бұрын
Good info. Good camera work. 👍
@nyacoustics8373 Жыл бұрын
i put a thin coat hanger down the tube and still couldnt get past that point. it hits that stop and nothing. any ideas ?
@macdezzo1002 жыл бұрын
@dannyjohnson'sGarage 1:26 Do you have a video changing the fuel pressure regulator? I see you touching it right there not many videos showing how to install on a Mustang.
@dannyjohnsonsgarage2 жыл бұрын
The closest part I have is where I disconnect the fuel line at the regulator. kzbin.info/www/bejne/mHPGo2p8jb1qnac
@justilianoacevedo50303 жыл бұрын
Thank you now I know
@Lethal_Venom4 жыл бұрын
that's cool, glad they have that piece in there to keep people from stealing my 93 octane lol
@dannyjohnsonsgarage4 жыл бұрын
I’d rather let them steal the fuel than mess up my system lol
@Lethal_Venom4 жыл бұрын
Danny Johnson’s Garage I just don’t want people near my car in general 🤣
@dannyjohnsonsgarage4 жыл бұрын
Lethal Venom Yes!
@genericdude65512 жыл бұрын
Ever hear of locking gas caps? They'll make it more difficult for some jerk to contaminate your gas also.
@Lethal_Venom2 жыл бұрын
@@genericdude6551 Ever hear of not every vehicle having a gas cap???
@jakemccoy3 жыл бұрын
So basically I cannot siphon out of a new car.
@simplybeanjelly2 жыл бұрын
1/4" outer diameter tubing should be able to get past all of that
@terrymatthews3132 Жыл бұрын
Hi Danny! Ok, I have a 2002 Mustang GT and my issue is I got a bad load of gas from the gas station and I mean a full load. I have been looking for a way to get all of it out of my tank and I really don't want to drop the tank to do this. I know I can't put a hose down the fill neck and you told one of your followers that he can't pull the fuel from the filter as it may not come through the fuel pump. I also saw one of your videos on removing the pressure from the fuel rail by disconnection the inertia switch and running the car till it stops. My question is, the inertia switch stops power to the pump, can I hook up power on the wire at that point to make the fuel pump run? What I would like to do is use the pump to pump out the tank but I don't want to do it using the fuel prime way as that will take forever and be a bit hard on my key switch as I would be turning the key to run then to off and run again as the prime will only run for a second or two. If this doesn't seem like a way to do it then can you please suggest a better way to accomplish this task? Thanks!
@dannyjohnsonsgarage Жыл бұрын
It really isn’t too bad to drop the tank, even just the side with the filler neck and once it’s lowered and the filler neck removed, put the hose in to siphon it. I’ve done it via the pump at the fuel rail and it will only prime for a few seconds and kill the battery and pump kzbin.info/www/bejne/i5nKnHqOgbieopI
@RobertoHx Жыл бұрын
Dropping tanks on those mustangs isn’t that hard
@rock-on6nt3 жыл бұрын
Danny the link is dead for the fuel line removal
@dannyjohnsonsgarage3 жыл бұрын
Thanks for letting me know. I’ll update it. Here it is kzbin.info/www/bejne/mHPGo2p8jb1qnac
@Shadoefax760 Жыл бұрын
Just remove the one screw holding tube connection from. Filler neck to tank and done. 30 seconds.
@SC457A4 жыл бұрын
I need to take out the dang filler tube. The dang valve on the bottom is stuck or something. Really difficult to fill with gas at .25 gallon per click at the pump. I have checked just about all the vents, etc. Not much else it can be.
@dannyjohnsonsgarage4 жыл бұрын
If it’s a mustang, this is how to drop the tank to get the neck out kzbin.info/www/bejne/i5nKnHqOgbieopI
@SC457A4 жыл бұрын
@@dannyjohnsonsgarage Oh I know how to pull tank, just too lazy. Lol. I installed a older version of the Fore fuel hat back in 2007, so the new stuff is nice to look at and it reminded me of the slow fueling
@Primitive_Code2 жыл бұрын
I'm just curious if someone just for the heck of it pours water or sand or something into the fuel tank, can they do that? Obviously the 2 metal pins can be pressed by a screwdriver or a bottle of fuel additive, then the cover opens, that's really sad but also stupid of the makers if that's the case.
@genericdude65512 жыл бұрын
Yes they can.
@Stephanie-bg7ur Жыл бұрын
Sooo, how do I get a tube out that I put in to add fuel??
@dannyjohnsonsgarage Жыл бұрын
You’ll also want a new filler neck grommet, so pick one up before starting kzbin.info/www/bejne/i5nKnHqOgbieopI
@lost70s3 жыл бұрын
So does any one have a suggestion or vid link or method to drain a mustang 2001 fuel tank that is .. of course FULL - the fuel pump is bad and can't be used to empty tank . any tricks as to dropping the tank -does the filler neck have to come out to drop the tank .. in essence how to minimize the fuel loss spillage on the floor from a safety aspect ... thanks ......
@dannyjohnsonsgarage3 жыл бұрын
It will come out of the filler neck as you drop the tank. Here is my video on the entire process kzbin.info/www/bejne/i5nKnHqOgbieopI
@lost70s3 жыл бұрын
@@dannyjohnsonsgarage hey thanks - well I figured that .. was looking for a suggestion not to take a bath to reduce fire hazard - Duncan
@genericdude65512 жыл бұрын
Can fuel be siphoned out through the fuel filter?
@dannyjohnsonsgarage2 жыл бұрын
I would imagine fuel would be hard to pull through the pump, so I’m going to say no
@genericdude65512 жыл бұрын
I don't understand why they put these anti-siphon devices into vehicles. Hasn't anyone heard of locking gas caps? And anti-siphon tanks don't stop some jerk from put contaminants down the fill tube.
@dannyjohnsonsgarage2 жыл бұрын
People tend to drill a hole in the tank instead to steal gas. I’d rather they just take the gas