This video shows how to install strings on Wilkinson's EZ-LOK tuners.
Пікірлер: 29
@MarkSD4 жыл бұрын
I pull the string tight then wrap one turn then into the second hole, locks tight. I use all upper hole's first. String's using a string tree lower hole first.
@Halenrocks51504 жыл бұрын
Great video! Thank you so much for the clear and concise tutorial. I just bought these same tuners and was not sure how they worked. Now I know:)
@vainparasite7 ай бұрын
Good job, I usually have the strings through the bottom first on both E strings and in the top holes for the rest so they are at a more consistent height behind the nut. But as you said it doesn't really matter as long as they don't slip 👍👍👍
@daviddigital6887 Жыл бұрын
Two holes, one hole, either way these tuners have a high ratio and hold pretty darn good for 20 $ tuners. I have a set on one of my el cheapo guitars and they are still in tune after two months in the closet and hold while thrashing on it. If you are short on money, buy a set.
@guitarste3 жыл бұрын
"Featuring Wilkinsons 'EZ-Lok' system" This feature is essentially 2 string post holes drilled at 90 degrees from each other. Pull the string through one hole real tight, wrap 3/4 around the post, pull tight through the other hole. Tune to pitch, cut the string- DONE. Use the top hole first for the E, A and D, use the bottom hole first for the G, B and E. Or, you can ignore it and string your guitar the traditional way, the choice is yours.
@JimboG723 жыл бұрын
It’s hard getting a tight wrap on the string and getting into the second hole. I tried this method but I found the tuners don’t hold tune and they are difficult to get the strings off the tuners. These tuners are going back.
@ldorman2 жыл бұрын
I never reuse strings - Anytime I tried to reuse them, the thinner ones snap and they don't seem to hold tune after. Considering a set of earnie ball or elexir cost around £6 here in the UK, I just replace them.
@brianm99023 жыл бұрын
This came stock with my Vintage V6P, funny some techs love them and some loathe them, but they work, for the money they are a great buy, but once you get use to stringing the low E and A it's becomes a natural thing,
@altaystudios446Ай бұрын
focus damn it
@dimitrisaivaliotis56164 жыл бұрын
These tuner are stock with the quitar?? Or you upgrade them?? Btw are you satisfied?
@Pirushu3 жыл бұрын
I think at the moment I have not seen any guitar that sells them, they are bought separately, look for them like Wilkinson Ez-lok
@Man_fay_the_Bru Жыл бұрын
@@Pirushu the vintage v6 comes with em
@Anton-ji4td Жыл бұрын
Your low E string is way to high on the post. You need a 'break' angle.
@MrStevie777 Жыл бұрын
How not to wrap strings. Sorry man, you got that all wrong.
@tims68246 ай бұрын
I ordered a set of these. They are truly awful if you try to use both holes. Just tune it normally and spare yourself the frustration
@onlyusernameleft23 ай бұрын
When I opened the pack of these I took one look and said "NOPE!" Seriously, the audacity to make a post that ties strings in a knot and call it a locking tuner. They're going straight onto the closet guitar and I'm getting some Gotohs.
@guitarhowtos21482 ай бұрын
😊 Enjoyed your comment. Thanks!
@ultraflex62573 жыл бұрын
WoW! sorry dude, it is all wrong. For 6 in line staggered tuners - Top hole first for the E, A & D. Bottom hole first for G, B & E. For 3+3 tuners - Top hole first for all E, A, D, G, B & E. Be sure a string in through correct hole, pull tight then wrap 3/4 around the post, pull tight through the other hole. Tune to pitch, cut the string - DONE.
@guitarhowtos21483 жыл бұрын
Ultraflex, thanks for your comment and explanation. You say toMAYto, I say toMAHto. No worries.
@origamipandabear28622 жыл бұрын
Thanks :)
@cdnpunk22703 жыл бұрын
All wrong
@magicgryszun92164 жыл бұрын
Try to watch it on mute ;) Fucking hell ?!? No more LSD and amateurs again ;)
@bluwng Жыл бұрын
Biggest mistake guitarist make… giving slack to strings, I use zero slack on every tuner and they work great, who came up with this insane amount of slack concept.
@alexpiccione6104 жыл бұрын
Lood at the wiggle room in the peg. Total garbage!
@ymelfilm3 жыл бұрын
Not really.if u dont like the idea, just use only one hole
@kost.94233 жыл бұрын
You dont lock with string on string friction on this system, you lock with the second hole.
@NolanZewariligon3 жыл бұрын
I think Alex was talking about the shaft of the tuner. It really wiggles a lot.