You are too kind! The video starts off "very nice" and goes awry when we lost the good smartphone...which was discovered after 4 days in the shower...but still goes...except for fogged lenses...which is the only bit I use...so,...I have run out of words but will keep everyone posted:)
@steam212 Жыл бұрын
Fantastic job Mr. Thomas! I will look to see if I can locate the proper mixer (carburetor) for you here in the states. Keep up the GREAT WORK 👍
@ThomasPCGuruENGINES Жыл бұрын
Yes I'm keeping a watch out too! That's very kind and your help is much appreciated. I would compensate any costs of course. Dude, 998 subscribers...!
@xiaolingzhang5385 Жыл бұрын
Good job, you did have fun. And for cheap :)
@ThomasPCGuruENGINES Жыл бұрын
Yes! Thank you! At least I hope it was cheap...well, I know one of these in good condition is worth more...but this one is a much-modified non-original without factory ignition, cart, exhaust, carb...but that doesn't affect my fun. I couldn't really justify 3 to 4x the price anyway :)
@davidkepley4396 Жыл бұрын
You might try holding the intake valve open when initially cranking to get the flywheels spinning faster. Less chance of breaking a wrist or digit. Works well on My 1916 1&1/2 hp Fairbanks-Morris. Very nice and good running engine, Great find!
@ThomasPCGuruENGINES Жыл бұрын
Good tip! You are most welcome here David, and any tips gratefully received! I will try this
@TheStig1961 Жыл бұрын
I like the sound of these old engines🙂. You make good restorations. Regards from Stig Österberg from Dalsbruk in Finland (the other side of the world.)
@ThomasPCGuruENGINES Жыл бұрын
Terveisiä! Thank you very much! I'm not so sure I do good restorations, but we can have fun. This engine is pretty tired....I also love the sounds of the engines. Tervetuloa Stig!
@odu50 Жыл бұрын
Hi. I discover your videos and your passion for the Miss engines. I first saw these engines on my travels in New Zealand, at Napier Art Deco weekend. I have always dreamed of having a Miss but in Switzerland it is extremely difficult, So I'm happy with the scale models M 92 and Red Wing from Pm Research. Thank you very much for sharing. Regards Christian.
@ThomasPCGuruENGINES Жыл бұрын
Thank you Christian! You are most welcome. Everyone should see your enginesL kzbin.info/www/bejne/q4a3Z4SQZpqXopo The red wing is beautiful and your other models, Well worth visiting!
@krzysztoftkacz6 ай бұрын
The electronic ignition system was great idea.
@ThomasPCGuruENGINES6 ай бұрын
Glad you think so! Not all my ideas work out so well... but my shoulders and arms are getting old...it's a cheap solution too :)
@rowenalukomska21907 ай бұрын
Thankyou for the information and the video on how to get the chore boy running. I have one here in Christchurch, NZ. It was my late husband's pride and joy. It seems as though it wouldn't start, because the petrol wasn't getting through. We managed to get it working by poring a little bit of petrol. I notice that you use a glass jar. Is this a common problem?
@ThomasPCGuruENGINES7 ай бұрын
I'm no expert on this particular model only really on the little ones though the principals are the same. The original carburetor is an extremely simple affair with a needle valve, I'd first disassemble this and clean and check for blockages. My carb is a replacement so I guess others must have this issue...and mine is off a Ford Model A and way more complex and unsuited really. Welcome to the comments, Do keep in touch :)
@peterotway-fd7oy5 ай бұрын
you,v got to get that magneeto gowig man
@ThomasPCGuruENGINES5 ай бұрын
Yeahhhhhh.....could do I suppose but the carb reliability as it is seems a bigger problem to me. Once that is solved....thing is, I have seen a fully complete one sell here for not much more than I paid...so...I wait
@thedolt9215 Жыл бұрын
Good magneto, great for zapping the kids… Good Lord, you sound like my dad! He told me to check the connection to the spark plug while the lawnmower was running… Afterwards, he said, I bet you never do that again.
@ThomasPCGuruENGINES Жыл бұрын
Lovely man, showing you what not to do... :)
@anythingoldmechanicalАй бұрын
The Amanco should of had a mechanical igniter and a LOW TENSION Magneto.
@ThomasPCGuruENGINESАй бұрын
Yeah I've seen that on the restored versions of these
@anythingoldmechanicalАй бұрын
@@ThomasPCGuruENGINES exhaust is incorrect too
@evanhale48457 ай бұрын
That runs sweet, I've got one of these myself
@ThomasPCGuruENGINES7 ай бұрын
Good on you Evan. I need to work on te carb, the rest is bullet proof
@lorddraper Жыл бұрын
That lister has twin fuel tanks the smaller one is for petrol and the other for paraffin or kerosene we have lots of them in England we used have something called tvo which was basically paraffin you get it hot on petrol and then turn it over to tvo or kerosene or paraffin I have tractors like that
@ThomasPCGuruENGINES Жыл бұрын
I've heard about this dual fuel thing bit I thought there had to be more syuff eg on the carburettor. Do you mean my actual lister could have originally been dual-fuel??
@rustygoldfanatic8830 Жыл бұрын
Thats an Associated Chore Boy 1 3/4hp by the looks of it.
@ThomasPCGuruENGINES11 ай бұрын
Thanks! Welcome to the comments. I tried to get this going a couple of weeks ago again, couldn't...I think I need a better carb solution...
@ThomasPCGuruENGINES Жыл бұрын
PART TWO RUNNING GREAT kzbin.info/www/bejne/rKuYZHeeo8Z3nZosi=TLlIFHkabsygL5pf
@andyduft2997 Жыл бұрын
How did you make the hole in the glass fuel jar🫙? 🇨🇦
@ThomasPCGuruENGINES Жыл бұрын
I watched this video kzbin.info/www/bejne/i5CxpYd4iayjaJI and with water and gentle pressure a normal dril bit worked just fine. I was amazed!!
@andyduft2997 Жыл бұрын
Thanks!
@chipsrafferty83625 ай бұрын
As interesting as this is your camera work is making me quite dizzy,so I’m leaving ta ta.
@ThomasPCGuruENGINES5 ай бұрын
Yes I left some in there that was AWFUL it makes me dizzy too. It was supposed to be edited out