Wilson Combat (Full Custom) Beretta 92 Bi-Tone review

[@gowilsoncombat]

Very Impressive. Looks like you are satisfied with all the improvements. Gotta love a WC custom job.

[@BERETTA9mmUSA]

Thanks very much for checking out the video! You Guys Rock, and I have a New 1911 from Wilson Combat that I will be reviewing in July 2022. Stay Safe. B9USA Sr.

[@JaviGlocksShorts]

how can i send mine?

[@adambloomfield5624]

Wilson combat made a huge difference in the performance of that Beretta.

[@unclegene5372]

Great vids by you guys. Everything you do has been very detailed and thorough. Have some Wilson combat parts and mags and their stuff is top notch. Want one of their guns but my money is acting funny.

[@stevefryer3500]

I’ve never had a beretta that didn’t run well. It’s almost lucky you found one so you could have a reason to have Wilson deck it out.

[@BERETTA9mmUSA]

Yes Steve, I agree. B9USA Sr.

[@dick8997]

Wonder if it was from the Kentucky factory instead of the Maryland factory. Seems as though the Kentucky factory has issues

[@ammooth1592]

Very nice beretta9mmUsa 💯. Wilson combat, did a fantastic job on your Beretta 9mm 💯.

[@TheGunfighter45acp]

Looks like Wilson Combat worked their mojo on this one. Beretta's will always be great looking guns, but those Bi-Tones are downright sexy!

[@pedronogueira9979]

Very sexy!

[@curtistignor3966]

Sweet call sign

[@willwilliam217]

I have a Italian made Beretta 92S 1980 vintage that I purchased used when I made Chief in the Seabee’s to gain proficiency with the weapon for Navy range quals in 1998. As long as I used the two oem mags that came with it it was very accurate and never had a feeding issue, for some reason it did not like newer Beretta 92 or other aftermarket mags. I still own it and trust my families life with it if needed. In 20 purchased a 92X full size USA made. The handgun always shot 8” low at 12 yards which deeply troubled me. Asked Beretta USA if they would do warranty, they said the shipping rate and labor rate for tech and I declined since the gun was only two months old. Tried LTT aftermarket sights, it got it to only shooting 6” low at 12 yards, but still not good enough. Shipped it to LTT and they replaced the sights and returned. It still shot 6” low at 12 yards. Tried a set of Italian made Beretta night sights which got the 12 yard shot to only four inches low. Unable to find a higher or adjustable rear sight, unable to lower the front night sight,, parted ways with the handgun. To its credit, it never had a failure, in my opinion Beretta USA warranty that is only one year and does not cover accuracy of the handgun is unacceptable.

[@OhioGentlemenArms]

Nice video. I’ve been Beretta curious for a few months now.

[@BERETTA9mmUSA]

The Beretta M9A3 would be my Top Recommendation! They are the Tanish-Brown ones for about $999. 🤠👮🏻‍♂️🇺🇸👍👏👏👏👏. B9USA Sr.

[@DaFroBroforeal]

I’m glad that you guys got the gun working properly. The silver really contrasted well with the black frame in the sunlight!

[@BERETTA9mmUSA]

Thanks for watching! B9USA Sr. 🤠👍🇺🇸👮🏻‍♂️👏

[@curtistignor3966]

Fro- shoo bro

[@mikereese15]

Nice improvement. Love young berettas 2020 reaction of frustration that he was having with it. 😆

[@KeanonGilliamSlang369]

Glad those upgrades fixed your firearm. The checkering is really nice now.

[@thomaswhite2802]

This is exactly what I want to do with my 92FS so thank you for sharing this video

[@guardianminifarm8005]

Super nice. Slick. Good decision. Thank you gents. Work of art.

[@frankbutta9344]

They Hit a Home Run! Congrats! 👍👍👍👍🇺🇸🇺🇸🇺🇸 🇮🇹

[@BERETTA9mmUSA]

Thanks Frank! 🤠👍🇺🇸👮🏻‍♂️👏

[@jpb1231000]

Bought the Beretta 92X RDO Compact... LOVE it!!!

[@BERETTA9mmUSA]

Right on! I really love the Wilson Beretta Models the Best of everything I have ever seen. The Balance is amazing along with a 10 for Quality. Enjoy! Beretta Sr.

[@jpb1231000]

@@BERETTA9mmUSA Great Vid... May go for some WC upgrades!

[@eduardohermoso150]

During the mid 80s,. I was able to use a Beretta 92F for several months. I used up over 500 rounds of hand loads and some ball ammo. It had no issues and consistently made groups at 25 yards and once hit the X ring at a distance of 70 yards. Sending the 92 to Wilson was a great idea. This video truly brought back good memories for me. Thanks B9USASr and B9USAJr for a great story!!

[@BERETTA9mmUSA]

Thanks for the Great Comment & for watching! Much Respect, B9USA Sr. 🤠👍

[@MrSmith-zy2bp]

I ❤ my Italian made 🍝🔫 Spaghetti Blaster (M9A3) it's my favorite pistol. Glad you got all the Wilson upgrades for your 92 that was obviously having issues.

[@tomglpn]

not a beretta guy but looks like WC did a good job at what they did.

[@waynecastleman1363]

Man that thing runs like a fox now. it's why I'm a Wilson Combat fan.

[@surfinbird71]

Really diggin' those grips.

[@BERETTA9mmUSA]

Me too, I am a Big Fan of it. B9USA Sr. 🤠🇺🇸👍👮🏻‍♂️👏

[@ammooth1592]

If the new line Wilson combat, is as impressive as your piece beretta9mmUsa 💯. I'm ordering one ASAP ✅

[@jocrpnter]

Nice

[@okiebob64]

Reminds me of the last Kimber I had. lol

[@BERETTA9mmUSA]

I have had good luck with my 3 Kimbers, but I hear you. B9USA Sr. 🤠🇺🇸👍👮🏻‍♂️🍀

[@krishnansrinivasan830]

Awesome & Thanks :)

[@crabblike]

Very nice. The 92 will always be my favorite and it’s great to see them competently taken to the next level. I’ll bet the ejection pattern improved. Haha

[@BERETTA9mmUSA]

Yes it did. Thanks for watching! :) 🤠🇺🇸👍. B9USA Sr.

[@tracer353]

Beretta senior could you include the build sheet you did for this? Definitely sending in my dad’s 92FS for the front sight, his older eyes have trouble seeing the white dot! Lol. Debating on ordering the action tune along with extra upgrades. Late Father’s Day gift as he can’t decide on the upgrades

[@BERETTA9mmUSA]

I’ll update the description box in a few mins to include all the build details. - YB

[@Skaramine]

I’m a southpaw, but that single sided, low profile right side button is so nice and clean. I can always use my off hand to decock the hammer.

[@G19Jeeper]

I find my Beretta is much more reliable when I am wearing a tight pair of Wranglers, cigarette poking out of my mouth and rocking a mullet.

[@nojoy7238]

I have a 92fs that has almost 20,000 rounds in it. Ive NEVER taken the gun completely apart. Just basic cleaning of the slide, frame and barrel. Never had a single malfunction. Havent CHANGED a single part. The gun Never had a issue from the box.

[@kevinb8527]

What was the turnaround on getting that back from Wilson? I’m tempted to send my 92 into them to get an ambi decocker only mod along with the upgraded springs.

[@BERETTA9mmUSA]

Like 3 months…. They are very busy for sure. B9USA Sr.

[@spacebear49]

You can get those parts (and install yourself) from Beretta, Wilson and/or Langdon.

[@kevinb8527]

@@spacebear49 Nice. I think I remember them saying that if you do the ambi decocker only that the slide needs to be completely refinished.

[@spacebear49]

@@kevinb8527 could be... I got the decocker kit from Beretta and put it on mine. Langdon uses the same one. No milling or refinishing needed. Just a couple pain in the ass springs!

[@PurrsPlace]

Hi there! I'm glad Wilson Combat took care of your problems; with their history of excellence, I would have been quite surprised if they couldn't. =) Do you see any differences between the Berettas made in the USA and those made in Italy?

[@BERETTA9mmUSA]

To be honest only slightly. Both are super good quality Defensive Pistols. However, I did go through 5 M9A3’s before I picked the one I wanted. They had some slight cosmetic issues or problems plus there was a difference in the trigger pull feel & weight. That was 4 or 5 Years ago, so hopefully they have improved their overall QC over the years. Good Luck! 🤠👮🏻‍♂️👍🇺🇸🍀👻😉👋🐉🌚 B9USA Sr.

[@Range13]

That is a functional work of art.. I love Microtech knives! (I have the Ultratech model.) Oh, the Custom Wilson Combat Beretta is pretty nice too! -Geno

[@BERETTA9mmUSA]

Thanks very much Geno!! You the Man! I enjoy watching your Channel, and I hope my friends here on our Channel will come over and check out your Channel. Good Clean Fun! :) Best, B9USA Sr. 🤠👮🏻‍♂️🇺🇸👍👻

[@desmondhumebrotha3522]

Gorgeous beretta. Just out of curiosity do you prefer brigadier slides or vertec?

[@BERETTA9mmUSA]

No real preference to be honest. 🤠👮🏻‍♂️👍🇺🇸👻🙀😉😼🌚👏. B9USA Sr.

[@LILK209]

Waiting to see the LTT beretta...

[@BERETTA9mmUSA]

I tried to get one….. in 2020, and they were difficult to work with sooooo we moved on. 🤠👍🇺🇸. B9USA Sr.

[@desmondhumebrotha3522]

What is the most fun to shoot beretta 92 model that you’ve fired? I’m strongly considering a 92x performance but open to your opinions regarding LTT and Wilson combat, and you seem to have a lot of experience with the platform!

[@Barbaroossa]

So, what did end up being wrong with this Beretta? Problems with the extractor?

[@BERETTA9mmUSA]

Yes, but I wanted it Custom while it was away at the Gym. 🤠👍🇺🇸 B9USA Sr.

[@chrisragone8785]

Do you have a list of the customizations Wilson Combat did and the price?

[@crosseyedwillie]

Weird never had that issue

[@bigB6flyer]

I wrote to WC the other day asking if they will resume the berettas. They said they want & hope to but still don’t have a date when that will happen. Wanting a WC centurion to go with the WC Brig Tac

[@BERETTA9mmUSA]

Excellent Pistols…. I am a lucky owner. This one is close. 🤠🇺🇸👍👏👏👏 B9USA Sr.

[@bigB6flyer]

@@BERETTA9mmUSA Yeah I procrastinated & didn’t pick up a WC centurion. I know the ltts are all the rage now (also hard to find) but too tactical for my taste.

[@unclesamthepimp]

Did you change the mag? I’ve had a problem with my 92fs just the same.. changed the mag to new ones and no more jams!

[@frankjuarez4738]

After all these years you would have thought Beretta would have fixed that problem by now but I guess not that's why I never bought a Beretta

[@BERETTA9mmUSA]

Not for everyone I guess. I own 7 of them and they all run perfect after having this one worked on by Wilson Combat. 🤠👍🇺🇸. B9USA Sr.

[@KJK_ATX]

Must be nice! I’m sure you got it for a really good price. I hope so anyway

[@BERETTA9mmUSA]

Yes I did. It was about $700 worth of Custom work for less the $100. We work with Wilson Combat and they like our 100% Honest Reviews. Wilson gives us large Discounts, again to be 100% Honest. I paid $800 for the original Beretta 92 Bi-Tone, before sending it off for all the Wilson Work. Thanks for watching! 🤠🇺🇸👍👏👮🏻‍♂️ B9USA Sr.

[@KJK_ATX]

@@BERETTA9mmUSA On Monday I’m thinking about picking up a Ruger SR1911. What would be your honest opinion about that particular handgun?

[@BERETTA9mmUSA]

@@KJK_ATX I hear good things about them, but I have 0 personal experience with them. On the Lower Cost Side of 1911 pistols we like the Springfield Armory Mil Spec or the Garrisons the best. We have several videos up on them. (The Springfields), again on the Rugers I would think they would be OK, but not in our 90 1911 Reviews that we have done in the last 3 years. Take Care Sir. 🤠🇺🇸👍. B9USA Sr.

[@BERETTA9mmUSA]

@@KJK_ATX a Springfield 1911 or Standard Manufacturing 1911 would be a lot better for the money.

[@KJK_ATX]

@@BERETTA9mmUSA Thank you! I’ll keep looking around. I want new of course but not totally necessarily.

[@onpsxmember]

Now compare it to the trigger on a Langdon Beretta.

[@BERETTA9mmUSA]

I do not own a Langdon. Sorry. B9USA Sr. 🤠🇺🇸👏👍👮🏻‍♂️

[@onpsxmember]

@@BERETTA9mmUSA Yet?

[@vinyguns5018]

Very nice pistol my friend 👍👉💥.

[@BERETTA9mmUSA]

🤠👮🏻‍♂️🇺🇸👍…..👋