Wire 48V Speed Controller Key Throttle, Motor, Battery...

[@MTBCruz]

after burning up one controller, finally a video that actually helped me connect a 5 pin throttle. thank you!

[@TheBdubya24]

Wow. I'm 48 years old and you helped me upgrade my kids scooter. I didnt know you use the "lock" port, blew 2 controllers. Also you said about swapping wires for the power indicator. Mine was always on. Fixed! Thanks alot!

[@stevehart155]

Dude you rescued hours of my life, THANKYOU

[@dylanmoore1006]

What im here for 🤘

[@CheapGameModder]

@@dylanmoore1006 hey, I blew up a 24V Battery recently but I hope it would not with my 48V one

[@tonyinfo5113]

Thanks Dylan I had just about given up on the controller I paid 41 dollars for. I couldn't get it to work to save my life until I watched this video and you showed where I was going wrong. She works now. Thanks buddy!!

[@dylanmoore1006]

Glad I was able to help!

[@jamesonmejia1]

I.....just wanna say thanks bro! Simple as connecting the key switch wires backwards...u got the only right answer. Thank you

[@00TreadStone]

Great video. Diggin' the slides bro! But your rear tire is on backwards! Very detailed wiring and that's what I like.

[@JL-dh5ge]

Thank you so much my brother. Your video helped me so much. You made a little boy an me every happy. Thanks again for taking your time too post this video.

[@dylanmoore1006]

Absolutely no problem man 🍻🛠💯

[@valdezbradley5536]

Thanks bro, I was just about to give up until I saw this video. The one I have has a pink and blue wire that needs to connect to the yellow and blue wires you showed on the throttle.

[@dylanmoore1006]

Thanks for letting me know

[@CopperHeadProjects]

Brushless vs Brush controllers. The one he throws is for brushless motors they last longer. The one he uses is for Brushed motor, don’t last as long eventually need to be replaced.

[@marianocardenas3440]

Can you give me more info? I’m tying to build a brushless motor electric Scott we

[@deputyfuzzball]

DUDE THANK YOU SO SO SO SO SO SO SO SO SO SO SO MUCH!!!!!!!!!!!! ive been looking for this kind of video you have helped me so much on understanding it THANK YOU!❤❤❤❤❤

[@dylanmoore1006]

Thanks for watching ❤️

[@FredCampbell-h8l]

I am a 77 YO gent recovering from a double displaced fracture of the femur, and going out of country to visit family and need to take a mobility device with me. I bought an e-bike made in America and is 25 y.o. It is a 24V brushed motor with a German 500W motor and the motor works. It needed a twist throttle, so I bought this combination throttle and controller from Amazon: Brushed Controller, 24V 500W Electric Bicycle Scooter E-Bike Motor Brushed Speed Controller Box with Handle Throttle Grip. We connected the red and black to battery and blue and yellow to motor and the three wires for speed control. We used the door lock for the Keyed switch so we didn't need to jumper it. Why doesn't the motor run? I thought I ws smart buying this old bike because it has an AGM battery allowed on flights. F

[@dylanmoore1006]

@FredCampbell-h8l Check your total voltage coming from your battery pack. If it's 24 volts it should read around 25.4 volts fully charged. If you're getting below 21v you might have a low power source to the controller. Once that's isolated, I would double check that your throttle wires are connected correctly. You may have to switch them around until it works. Lastly, you could test your motor by running the battery terminals directly to the motor, if the motor runs, the motor is good 👍

[@FredCampbell-h8l]

Thanks

[@edbermu2201]

a bit more clear on the last part of that connection between the power lock and throutter yallow and white wire

[@dylanmoore1006]

Yeah the last two wires, other than the green, black, red. Plug the two other from the throttle into power locks, switch the wires until your throttle powers on with the keyswitch in the on facing position.

[@g3user1usa]

I bought a $1400 e-scooter from Amazon and fortunately, it's working perfectly for the first 300 miles. However, there are no e-scooter repair places I can find in NYC if something eventually goes wrong. These Chinese e-scooters don't seem to follow any standards and there are no wiring tutorials available. I really wanted to upgrade my battery (48V 17.5AH currently) capacity for longer rides. 25 miles is tops using a Garmin GPS for accuracy and riding about 17 mph. I was hoping to get a battery (48V 23AH) that could give me around 30 miles range. I'm not looking for a higher top speed, just longer riding time. I thought I could find a shop that could easily handle such a simple upgrade, but not one shop does that sort of thing. It looks as though I'm going to have to do it myself. NYC and no e-scooter repair places. That's just crazy. If I knew that, I would have bought an e-scooter from MiniMotors or Voro in NYC and bought an e-scooter they could fix or upgrade. Oh, well. Live and learn. If I can get 1000 miles out of it, I'll take the loss and buy a better e-scooter if I can't upgrade it myself. I've been scouring all the controller tutorials to see if I can learn something about controller wiring. What a mess. It's nothing I'm looking forward to doing. I just want to ride and not tinker.

[@smoxesss]

did you solve this issue

[@markmannm2]

Any additional thoughts? Thumb throttle with on/off and LCD display, RED, BLACK, GREEN, YELLOW, BLUE. Controller available wires, RED, BLACK, GREEN, YELLOW, WHITE, BROWN. 1000W 48 Volt Brushless Controller. Please comment ONLY if you know which combination works! Thanks! MarkMannM2

[@dylanmoore1006]

Not all speed controllers are the same, but I'll shoot my shot at helping you. Red black and green should all correspond with the same colors on the "derailleur" plug. The yellow and blue should hookup to "indicator light" plug. Lmk if this makes sense

[@vikkidyer]

​@@dylanmoore1006hi I've got 3 18v 5ah makita batteries I have all the adapters for them to work on a scooter. I was just wanting to pick your brain to see what controller and motor you think would work. Xx

[@dylanmoore1006]

@vikkidyer if you're running the batteries in series to get 54v, then I would assume a 48v controller/motor pair would work fine.

[@vikkidyer]

@@dylanmoore1006 thanks so much for the reply. I will have a go 🙂

[@boasnovasonline8764]

should i connect the blue and yellow wires from the throttle to the power lock wire on the controller? if so thank you very much dear friend you saved me

[@davieanwilliams9205]

Does it go faster with th battery and control box up grade and what motor is it stock . Can I put upgrade bat and c box to stock motor let me know thanks

[@vikkidyer]

You are the magician of electric vehicles. I just wanted to ask you if there is a way to put an escooter controller on a mobility powerchair that has 2 motors. Really hoping that you can. Thanks for these fantastic videos xxx

[@dylanmoore1006]

Thanks for watching! I'm sure it's possible, it would depend on the type of motor used. The controller shown in the video is for a brushed motor.

[@asianadventure916californi2]

I have a Uber scooter1000w there is a sport line on my control where does that one plug into

[@dylanmoore1006]

Not sure, but there's definitely some info online. They always put many extra connectors and features on the controllers. What I do know is that they're optional to connect.

[@alaraujo8668]

parabéns, muito bem explicado show, abraço.

[@marrakesh_3589]

is it possible to use this in a remote controled large car with a 48v motor

[@dylanmoore1006]

Haven't tried it, most rc speed controllers work differently than these. I wouldn't expect it to work unless you find a way to hookup a transmitter/receiver

[@timothybranson5050]

All the new controllers only have two phase wires for the motor how do you hook up a 3-wire motor to a two-wire controller

[@BAlex-c6n]

I’m stumped at that part too

[@alfiefernandez3431]

Thank you you really did help me 🙏🏽

[@massterrbarber]

I know this is like three to like six years ago. It’s still relevant. Of course I got the Jetson electric bike. I’m stuck at 15 miles if I change my controller will I have access to more speed?

[@dylanmoore1006]

Some controllers will allow more power to be withdrawal from the battery. But it depends on how many watts it's already making and the battery voltage ratings. Usually it's possible

[@skulldragon3799]

Bro I need help stat!!!!!!!! 1. When a controller says that it's rated "controller current" is for example 34 amps, does that mean your battery need to constantly provide 34 amps at all times for the controller to work? 2. If your motor is rated for say 48 volts does that mean your battery needs to have 48 volts for the whole system to work, or can I get away with a battery with less voltage? 3. vise versa, if the motor is rated for 48 volts and I put more voltage, is that motor going to overload? or perhaps the controller will over load? 4. Is a 2000 watt maximum motor for a bike a normal thing? becuae I see companies like Swytch bike have powerfull motors with only 250 volts and 12 amps maximum. I am super confused and I am trying to make an electric hub motor for my bike. If you have time please help. thank you and great video

[@dylanmoore1006]

My knowledge about ebike controllers is pretty basic so bare with me. The amperage is the max current the controller can handle I believe, could be wrong. Depends on what controller you have and how it's set to work, most of the time it won't work undervolted. The pre-built 48v speed controllers are set to shutt off around 42v reading the battery as dead. You can overvolt some hub motors up to 12v+ as long as you do a bit of researching. 2000w motors are great as long as you're buying from a legitimate source.

[@jackrudkin1296]

I have wite yellow and a blue wire , if I plug white and yellow in to power lock like you did , what do I do for the blue wire ? Any help appreciated

[@dylanmoore1006]

Are the wires coming from a throttle?

[@derickvorpagel]

So u got to hook the switch to the ground and positive battery

[@dylanmoore1006]

@derickvorpagel yeah its different on each controller but some of them have a single red wire that comes out of the controller which is the ground

[@brettsumma4686]

Great video Dylan!Very helpful!I have an e-zip 900 that got upgraded to 36 volts a couple years back.Its been sitting and the batteries are dead.The current batteries are the square acid ones and one is mounted on the outside frame.I like to use the the same type of battery you are using so it fits underneath the foot rest.Can you give me some insight?Thanks man!

[@supplyman1240]

If I add a controller that has a higher wattage then my motor, will it damage my motor. I am having trouble finding a 700W one for the 3 wheel scooter that I have and it does have reverse, 3 speed forward and alarm connections. the high speed is not working and all the wiring and switches check OK. Thanks in advance for any help.

[@dylanmoore1006]

I mean I've been running a 500w motor through a 1000w controller, the wattage rating on each controller Isn't what changes the power. That's all the motor. The controller just limits it's power capacity and using one that's rated higher than your motor will just unlock all of it's potential, and it doesn't increase from there. Now reverse, I have zero experience with just because I've only built 2 wheel scooters.

[@supplyman1240]

@@dylanmoore1006 Thanks, I think that I will buy the one that has the same number of conectors and give it a try

[@dylanmoore1006]

@@supplyman1240 Oh no problem lmk how it works out

[@exploringthederelictwithlo7225]

Hiya, can you please send me a current link... To a speed controller with throttle please??? Just need some help as feel confused and don't want to order the wrong thing. I have already put on a bigger motor but still running the standard type batteries. Need a bit more speed + control! Thanks Lola

[@dylanmoore1006]

So you're running 24v how many watts?

[@exploringthederelictwithlo7225]

@@dylanmoore1006 I actually don't know because I changed the motor three years ago and can't go as far back on order history to get the details... Is this a huge problem?

[@dylanmoore1006]

@@exploringthederelictwithlo7225 not a huge problem but it's something you wanna know. When you buy speed controllers they have custom ratings by voltage and wattage. They're all different

[@dylanmoore1006]

You'll want the controller's voltage/wattage to be the same so you get full potential

[@exploringthederelictwithlo7225]

@@dylanmoore1006 There's a sticker! Can't fully read it but... Rated Speed:2750RPM Rated Current:18.7A Any ideas on a link for me to purchase?

[@vaughnwalker1840]

My only question is can you wire two of those battery packs together?

[@dylanmoore1006]

You can wire them in series. But depending on the bms used in the lithium pack

[@javierbarajas3087]

Can you list what I need to buy to make this happen? I have the same Scooter

[@johnr2866]

But does she know what all the other wires are for if it has the additional features on it

[@joellurz9535]

Just purchased some of the link scooters at auction...can I do the same for them..or do I need different BMS board etc...thank you

[@dylanmoore1006]

If the scooter uses a brushless motor, it will need a brushless Speed controller. The motor on my scooter is an old brushed motor, and they aren't as efficient on battery life.

[@the-bu3lb]

could u help me understand please I wanna build a electric scooter with each hub motor at 1600w and the battery at 72v35ah like the chinese make i have a frame but i don't know what controllers to buy and how the go together. did u have to out your own connectors together since some might not sna in together thanks like your videos great job

[@reesereiter9517]

I plugged everything in right (I think) and when I turn the key the voltage comes up but when I turn the throttle the motor doesn’t go.

[@dylanmoore1006]

Only four wires are needed to get it going which include: Battery, throttle, keywire, and motor. Check that your throttle wires are matching colors. Check motor polatity, and battery life. If it still doesn't work there's a chance the controller has been blown from being connected to the battery incorrectly.

[@rdahiya2510]

Hello brother how can find speed wire in different brand of controller, which is right wire should be , I really tired now speed 15 with 400watt moter 48v 20ah thank you

[@dylanmoore1006]

Is it a brushless or brushed motor?

[@adamwillson1014]

I have the same unti but with the foot pedal and im getting nothing out of it when i hitbthe pedal. I hear clicking when i turn on the controller but no motor movement

[@JavierHernandez-jq9uv]

Can it installed into a jetson bolt

[@memo48memo]

How do we get current,voltage,rpm and heat values ​​from the motor controller

[@dylanmoore1006]

a.co/d/j3MtFq4

[@dylanmoore1006]

They have some for brushed controllers but the brushless ones have alot more features a.co/d/brEFbsW

[@albertoleonardolopezmartin2823]

My instrument gives error 7, it starts well and then increases the speed and gives the error and I changed the motor and the battery. What could be a controller fault?

[@BienviTv]

What is i changes to i have 500watts motor i want to 1000watts upgrade. Do you know i changes the controler to upgrade too

[@dylanmoore1006]

First, determine if your 1000w motor is brushed, or brushless. Then search Amazon for those specifications including voltage.

[@BienviTv]

@@dylanmoore1006 i said if when i changes the 500watts motor to 1000watts what is controller i use

[@dylanmoore1006]

@@BienviTv Gotta know which type of motor we're talking about here. There's two different types of speed controllers, brush or brushless. Another words get a 1000 watt controller. But don't get the wrong one

[@fishfarmtvmix7996]

I have my cart problem we need to convert controller speed battery 36volts and motor 36volts 1hp 105ampers

[@Trapremix_ow]

So with replacing the controller should I get the exact same one from the company’s website or can I get it from anywhere

[@dylanmoore1006]

Try contacting the website first and if all else fails you should be able to use any universal controller with the same voltage/amp rating

[@kylecarlson8044]

I dont have black but I have white Grey and yellow which do you suggest I use?

[@dylanmoore1006]

If there aren't any labels, I would contact the supplier to see which connector is the power lock. Jumping the wrong connector can blow the controller mosfets.

[@sami-zc1nl]

dude the yellow n white throttle wires do they go to red n blue on the controller.ie,yellow to red and white to blue is that right

[@dylanmoore1006]

It should be red green and black, match them to the connector called "derailleur"

[@sami-zc1nl]

@@dylanmoore1006 yes,iam talking about the key switch

[@dylanmoore1006]

@@sami-zc1nl if you own a keyswitch throttle then it should have 5 wires, the switch for the key should be called "power locks" match them up and then plug the throttle in.

[@sami-zc1nl]

thank you,top man

[@paulstir]

how can i hook back up my charger port or add a ldc display

[@mhyklootee6118]

I have a dual blr dc controller 48v.. I want to config it to my njax throttle xthunder.. can u help me mate.. 🙏

[@gearedeagle6484]

I have a chaos sport, 1600w 48v scooter with a 30a controller, hub drive brushless motor. I was told if I purchase a 45a controller I'd get more speed out of my e scooter. Is this true?

[@brianprosek7875]

Hi, I have a joyor X5s with some open (unplugged plugs) one is small black /red wire with red connector, other is orange brown blue with red connector, and lastly one green / black small wires with black connector. Controller is a DC Moto ZH1PU any help greatly appreciated!

[@dylanmoore1006]

No problem glad you found the video helpful!

[@timothybranson5050]

I've now purchased four of them and all of them only have a yellow and a blue phase wire for the motor instead of three so what do you do in this case to hook it up

[@dylanmoore1006]

@timothybranson5050 It will need a brush(less) controller for the three wire motors. Brushed controllers are for the two wire motors. The one in my video is an older style brushed controller, only designed for 2 wires. I'm probably gonna make a video on how to wire a brushless controller soon. There are many others that need to know as well.

[@dylanmoore1006]

@timothybranson5050 a.co/d/0a1RE88p www.amazon.com/vdp/0d61507b13bd42ab99914364ade6c2df?product=B09GRVNNVC&ref=cm_sw_em_r_ib_mb_QEMUxC5xLBAKp

[@timothybranson5050]

@@dylanmoore1006 there's no way to hook up a two wire controller to a motor

[@timothybranson5050]

So I have five brand new 1,000 w 48 volt two wire controllers for sale

[@timothybranson5050]

Or trade for three wires

[@doneoff5424]

I’m trying to connect front and rear lights on my scooter with the throttle with the key I wanna know where do I connect my wires too on my brushless 1800w speed controller

[@dylanmoore1006]

Should be labels on every speed controller for headlights and taillights. If not I'd recommend a better unit

[@todortenkov527]

Can it burn out..if the battery poles are reversed..i have problem with my electric moped..I burned out my charger.. after that everything gone wrong..I changed the battery..but noting.. only the lights and blinkers work

[@dylanmoore1006]

Yes, it is very important to know that the positive and negative wires are direct to where the power is supposed to go, otherwise it was cause a short circuit and burn the controller. The battery and motor will be fine, but controller will need to be replaced

[@todortenkov527]

@@dylanmoore1006 i didn't know that..i thought the problem is in the battery.. Many thanks mate.. I'll get new controller.

[@dylanmoore1006]

No problem mate, hope to see the project running soon!

[@michaelkos7755]

but can i change just the battery? to one with the same voltage but higher amp? like 30 ah or more? i just want to travel longer distances the speed is oke now

[@dylanmoore1006]

@michaelkos7755 yes you can

[@GDMHificationranpitc]

thanks just what i was looking for can you overvolt these controllers .. like one can a brushed controller?

[@dylanmoore1006]

They can't go past about 6 volts or so above 48, and no problem. But if you overvolt a motor it should work just fine as long as you don't overwork the brushes.

[@GDMHificationranpitc]

​@@dylanmoore1006 cool, I guess I can tell if the brushes are overworked by monitoring the heat? What do you think about that Harbor Freight soldering gun?... I find mine to be not too good ..barely works... Their older one put out a lot more heat., so much more heat that it use to melt the body of the gun, My soldering pens work better at just 80 and 60 watts. The power locks connector for the win.. after hooking it up it worked then kept cutting off then I switched batteries and all is well. cool channel worth subbing to. clear and concise. Shalom

[@dylanmoore1006]

@@GDMHificationranpitc yea the harbor freight ones overwork themselves and the tips burn off. I would recommend the soldering station so you have a sponge to clean the tip and flux. The stock motors only burn out from heat and not voltage, but running 36v should be okay...

[@starwoodstudios1]

Question: I have a 1000 Ecotric Hammer, 48 Volt, I want to use a 52 volt battery with. Is there any reason why the 48 volt controller would be damaged by this?

[@dylanmoore1006]

Its possible to work since it isn't over 6 volts above 48, but its not guaranteed. I would give it a try since the controllers are only 25 bucks,

[@starwoodstudios1]

@@dylanmoore1006 Yeah, since the battery was $300. I would like to see if it works. I'll probably upgrade the controller if things get "crispy"... It is funny how I have never seen a 52 volt controller. They go to 48, then jump up into the 64-72 range...Oh well, I let you know what happens Thanks...lol!!

[@dylanmoore1006]

@@starwoodstudios1 no problem mad good luck

[@vikkidyer]

​@@starwoodstudios1hi did it work with the controller 😊xx

[@jamesbutler7637]

Any chance you you tell me the battery you have? I tried the link but could not find what size battery. Any help would be appreciated. Thanks JR

[@h4mm4d69]

If i put one 36 volt battery in the scooter and put a 48volt controller and keep the stock throttle will everything Work?

[@Abdul_-ct6pn]

It will work as normal, but recommend buying a variable throttle so that you would be able to control the speed, as with the stock throttle as soon as you twist it, the scooter would go flying up as the stock throttle is nothing more than a on and off switch for the throttle

[@joenicastro281]

No,controller has a minimum voltage to work

[@michaelkos7755]

h bro i have a i scooter i9s 500watt moter 36v battery and 10ah can i just put a 36v and 100ah in it without changing the controller? greetz mike

[@chuanzhuec1207]

Super helpful. Cheers! Any chance you can shoot a video about how the throttle, motor and controller work with each other? Looks like many are struggling with choosing the right specs

[@brettsumma4686]

Hey man,any luck on what type of battery i should purchase?Thanks Dylan!

[@Abdul_-ct6pn]

Hey dylan appreciate all your efforts that’s put into this video I have a problem, I recently replaced my batteries for my e300 scooter with 2 12 v 9ah lead acid batteries and when it charged fully, it would probably last around 5-10 minutes of full throttle I’m not sure what’s the problem do you think it could be the motor probably being worn out

[@Flaggedsports865]

Dude same idk how to fix jr

[@arie6004]

can i change a 36v 350 watt to a 48v 100watt? without it burning and exploding ofc

[@boasnovasonline8764]

Hello my name is Paulo chapel, friend help me with a brushed controller d 30 vts 500w 28 A. of the brand XUN. I don't know how to connect this device, on the accelerator with a contact key, this accelerator has 5 wires (On Throttle Socket: Green, Black and Red) (separator: 2 wires; Yellow and blue.) This throttle has a motorcycle key and battery indicator. on the brush controller there is a white socket written: (Derailleur) in the colors green red and preto. I already know it's the accelerator but what about the two yellow and blue wires???? where can i plug it in?? we have two blue wires in a white socket written lock two blue wires written lock; what are these two wires for?

[@dylanmoore1006]

Connect those two wires to the "power lock" on your speed controller. This is your power switch, if the bike stays on when you plug it in, reverse the two wires, and it's ready to use

[@boasnovasonline8764]

@@dylanmoore1006 the friend refers to the two blue and yellow throttle wires? connect to the blue wires that say lock ?

[@boasnovasonline8764]

kzbin.info/www/bejne/pKqnYX-nlruihLM

[@boasnovasonline8764]

@@dylanmoore1006 kzbin.info/www/bejne/pKqnYX-nlruihLM friend I edited an emergency video, showing the model of my controller and the type of accelerator and the purchase site, everything in this link I think you will understand better what I'm looking for

[@dylanmoore1006]

@@boasnovasonline8764 yes sir, the blue and yellow are coming from your throttle correct? Connect those two to power lock. Should be red to blue, and then yellow to the other wire. Your keyswitch should turn on the unit.

[@milolim48]

If I held down the throttle for a long time would the controller or motor pop first? Also would the pop of the controller be loud enough to hear?

[@dylanmoore1006]

Sometimes one can fail before the other, from my experience usually the motor overheats first. There is no noise but you will smell the motor overheating. It can hold full throttle for a minute or two. These motors like to stay at 36v

[@milolim48]

@@dylanmoore1006 what's the range on your scooter? Do I need to plug the charge port through the controller or can I just use the provided charge port on my battery?

[@dylanmoore1006]

@milolim48 I sold the scooter, but when I had it I got around 15 miles every charge. You can charge the battery without the controller if you need to. Larger battery packs extend range

[@milolim48]

@@dylanmoore1006 how much did you sell it for?

[@dylanmoore1006]

@milolim48 I sold it for about $300 back when I could get away with that. Nowadays, it's hard to sell them for a reasonable price

[@ricardobalazo9735]

Hi, Thanks for your video very helpful, however when you connect the batteries and motor to the controller you skip the process. Can you help me we’re I gone wrong. I have similar controller and throttle set up. Connected the red, green & black wires of the throttle to the derailleur controller similar to your video. Connected the yellow & white wire of the throttle to the power key of the controller. When I turn the key of the throttle the battery lights indicator is “on”. However when I twist the throttle the motor will not run. Connected the battery wire black to black of controller and battery red to red of controller. Yellow wire of controller to black wire of motor and blue wire of controller to red wire of motor. Twist the throttle motor not running however check the voltage coming out of the controller is 36.8 volts and also the same voltage when I twist the throttle and battery indicator lights are “on”. Thanks

[@sherwinsarmiento3970]

Can my 36V throttle work on a 48-volt controller for an e-bike?

[@dylanmoore1006]

@sherwinsarmiento3970 It should work if it has at least three wires (Red green & blue). Sometimes the ground wire might be a different color.

[@sergioinsunza8653]

Hey my 500w 48v 18 Ah electric scooter brushless speed control went out on me and my rear wheel makes a sound now. What brushless controller do I need?

[@dylanmoore1006]

Search those specifics in ebay and you'll get what you need

[@sergioinsunza8653]

@@dylanmoore1006 here's my other question how would I know what I need. Because I've been hearing that I need to count the wires I have and with out the blue yellow and green and black red. I have 27 and one person saying that I need to have 23 wires or that on the brushless motor controller box I need to look for the exacted 48v 39v 15A? Can u plz tell me what is the right one

[@sergioinsunza8653]

@@dylanmoore1006 plz and thank you I really appreciate it so much 🙏

[@dylanmoore1006]

@@sergioinsunza8653no problem

[@sergioinsunza8653]

@@dylanmoore1006?

[@lucasslegobuilds]

Neither of the links seem to work for me. Any updated links?

[@dylanmoore1006]

a.co/d/7iFroQf a.co/d/dszm6Et

[@Bl8de2]

Do i still need to do all that stuff with the wires if I have a stock throttle

[@dylanmoore1006]

You'll need to replace the stock throttle, there are kits that come with it that fit the controller on amazon/ebay.

[@stevethorp1857]

Hi. Can u run this controller with foot throttle for a go kart? I've tried it and have had no luck. Thanks

[@dylanmoore1006]

Yes hook up the three wires black, red, and green into the derailleur plug on the speed controller.

[@stevethorp1857]

@dylanmoore1006 thanks for the reply. Tried that and no joy. I assumed I should be seeing 5V between red and black? Only getting 150mv. I bought a second controller and have the same result.

[@dylanmoore1006]

A couple questions are you using a brushless or brushed speed controller and motor? The one I'm using in the video is brushed, and if you use the wrong speed controller, it won't power the motor. I'll send you a link to the esc I used in the video. It is for a brushed motor only a.co/d/6lRGHMf a.co/d/aNclzNZ

[@izzatfuaad437]

hi i have a question. is it okay to use 99ah battery on dual 25a controller? the voltage is the same

[@dylanmoore1006]

Be careful on what you may think is 99ah, most 8ah batteries are at least 150$+ there are alot of fakes

[@krissf684]

hey man, i just upgraded my motor and controller to a brushless one (48v 1800w) and my key switch just stopped working any ideas on how to fix it?

[@dylanmoore1006]

Check over all connections and search for any exposed wires. Any exposed wires will be the vulnerable to arching or corrupting the controller for good. Sucks when this happens best bet is to use a multimeter and test your battery it should read at least 49-50 volts. Anything between 48-52 should be healthy

[@krissf684]

@@dylanmoore1006 thank you, and i should also mention that i am using a 36V battery should i buy one more pack to make it 48V as the motor?

[@krissf684]

@@dylanmoore1006 got the electric lock working just switched around the wires now the only problem is that the motor wont turn and i have heard that i need a Three speed switch so i have ordered that now im just waiting

[@dylanmoore1006]

@@krissf684 Anytime. but I think the reason it won't work rn is because you have to upgrade your battery. Running a 36v on a 48v controller will trick the controller into thinking the battery is dead. I never had to order any special switches all you need is matching voltage to the controller amd you should be good to go. Remember to grab a new charger too you'll need it.

[@krissf684]

@@dylanmoore1006 alr then im gonna try that thank you

[@thedaydreamer7972]

Hi Can you clear this up for me? I have 48v 1600w brushless scooter motor in my scooter, stock 48v 12ah 20v LI batt and crap no name controller What is the main component that powers this motor and can push it to the limit, is it the controller or the battery? I was thinking to go with 48v 1500w controller and 48v 20ah 50v LI battery (1800w) max What controller and battery combo will push this motor to the max? I was even thinking of going 60v overall TY

[@dylanmoore1006]

The controller is just the motherboard for safety and throttle connectivity, the battery is the main source

[@thedaydreamer7972]

@@dylanmoore1006 couldn't the controller if its the wrong one limit the scooters speed? If I have a 1600w motor, should I get a 1500w or more controller? TY

[@Temazine]

Hey, i'm trying to figure out which wires on my controller are for the key switch. None of them are labeled, and the label on the controller itself is in chinese. To make matters more annoying, none of the wire colors match what is on my scooter or shown in your video. Even on the circuit board there's no markings. I figured i'd check the voltage between the pins of each of the connectors. I have found two connectors, which when plugged into the battery show 24V each between their pins. The rest show 0V. How do i find out which one is for the switch without ruining the controller? My motor, battery and throttle cables are already identified.

[@dylanmoore1006]

best bet would be to replace the controller, an unmarked controller is very easy to pop

[@vikkidyer]

If your controller has a model number could you look to see if you can find a wire diagram 😊xx

[@m3scann]

how much average time and distance will this battery setup achieve? thank you for this easy tutorial.

[@loydelumba3015]

Can you help me sir how to connect by using 2 controller on 2 motor...48v

[@ahmadzaki3328]

Excuse me mate, what kind of motor is this and how many phase?

[@dylanmoore1006]

I was using the stock motor, however they aren't recommended at all for that voltage as it should match thr wattage as the controller

[@tavarrismayes2251]

Hey bro where do you got your battery from. I want to run an 36v motor on my ezip.

[@dylanmoore1006]

Sorry for the late reply, here's the best deal: www.ebay.com/itm/402712329149?_trkparms=ispr%3D1&hash=item5dc3867bbd:g:zVQAAOSw-5dgOJmW&amdata=enc%3AAQAGAAACoPYe5NmHp%252B2JMhMi7yxGiTJkPrKr5t53CooMSQt2orsS%252BMKizvpuEDUfX4dvRWfUzccI%252BObjdCe1h7d1dZVQHMu1FYdonSPfYQLduldBMj9jPiZHLahIoojr4OyT4i06FJQXG9UfB57ojbMpY7PzdJtnxuw9kK1O9ap6e0fGCSbqS51y3e73uwv8HOegl6gWdd1Z%252BHWtRUtrYLCp4zioUGPV2aHPCdvkTNvm0yWKhVrnMXsZj9d1IWCVEOP%252BZSkGCPZrl%252FNV9Y5JOI32t708Fx%252BYtop33sF52K7V9v3fmXKW2bDYajZGk4A2ptUERltm82hd2L2VCrdjXhcTME8rv1pbRCC%252Fs%252FaXTMgv6kbdwQrkZ1MDBdDDEvCcRlC4cIYkZrfojfjpMhJk93ux9kUv%252F7W91eOrvkgvdZR24sWedzJOJXk17WbEm3%252BPKdmmKE8YkCubENAMWpt6K%252FZN8f%252Fs313DeFDS91fUqOzNkTbtRYSsrVtgYP2oHMf9NQXq%252FeTm1olYMwWP0uiPy4tDxeUyn0y5%252Bh5yZ%252BelVLy3zcIBYNnIg5AMQs%252F4fCo4LZOiRwHJcUgsRy4fbMPt%252F8e%252FZ7ek16AHspOvym4ElBWeFzkZpLDrtshqoVrPpvitejiIFUR%252Bld5JC46%252BLbDdZlgbpWs9Hyv7wtN82S8as%252FyeuLNDf%252F3xO0RTDLZV6dofWnuGwwiZhAHSVyWXYjjPVBfU%252F0CcsresendD55fl2Lk%252BN9Ulkq4skIByDgie1KfFvkXXPqPOHRCAfti4Q5Z%252B6W0PLoGROGWPEhUW2j4WXeLdpEWPMv%252FGf7N2R7qrEeRumA69EvkzZk5sbzYUQWlxzdU%252Fw3O52C%252BNxClEbTl6caZtt2J4jyk89dMXABDG%252Bqik5HuSgg%252FZ2A%253D%253D%7Campid%3APL_CLK%7Cclp%3A2334524

[@snorkel7654]

you think i could do this on a e175 and is that the stock motor

[@dylanmoore1006]

On the e100s I think it can handle 36 volts but I haven't tried 48 volts, I'm pretty sure the motor has a voltage cutoff. The scooter in this video has the stock e300 motor, and even then it was too much power and would overheat often.

[@snorkel7654]

@@dylanmoore1006 alright thanks imk thinking im going to replace the motor on it then and could you replace the link for the battery it does not work any more

[@dylanmoore1006]

@@snorkel7654 agomola 48V Battery Lithium ion 10Ah 14Ah 15Ah 20Ah ebike Battery for 100W to 800W Electric Bicycle Bikes Motor with Charger BMS a.co/d/98EtH9W

[@whitefeatherslinger8194]

That controller is no good for mid drive or hub drive motors as theyve only 2phase wires yellow blue and green i wonder if a 3rd could be connected ? The main motor thick wires is what im talking about

[@dylanmoore1006]

Yeah those hub motors are for brushless controllers they work off of hall sensors and 3 phase wires. All of the old brushed controllers are 2 wire phase with no hall effect

[@pkinspkins1605]

about how long or range do you get with these batteries?

[@dylanmoore1006]

The lithium ion battery packs are a unique was to get extra range out your scooter/bike because they're way lighter and way more efficient than sla's. The range depends on the (Ah) rating that's listed with each battery. It's important NOT to cheap out on these batteries because chinese company's scam their advertising all the time. For instance the battery in this video was probably a 12ah, which would last a good 1.5 hrs per recharge. But ive ran across fake advertized ratings so theyre cheaper and arent the size (ah) advertized. So when you buy these batteries be ready to spend at least 300-500$ on a positive reviewed, name brand battery pack.

[@shainajoiner3045]

I need help so bad any way you could coach me through this somehow

[@dylanmoore1006]

Only the power, motor, throttle, power lock keys are needed to get it going. Lmk what you're stuck on

[@akalankajayarathna5817]

What is motor voltage .is this controler use 24v motor

[@dylanmoore1006]

you can use a 24v motor with a 48v speed controller.

[@akalankajayarathna5817]

@@dylanmoore1006 thanks for your idea

[@MalevolenceCobra]

The link for the battery doesn't work what is the best battery for a 48 volt motor

[@dylanmoore1006]

kzbin.info?event=comments&redir_token=QUFFLUhqbmp6SDM2WmdWMFRkTFR6VFNKWWNoY3FXWTBBUXxBQ3Jtc0tub2VvRjhRX2EtVkdyMU9TS0lvOUdydUk5TE9STGVFc1VMNDUyZEIyX0pkckJBSEpwZ3Q4NGN6Y0lMOWxHOVFnOUpQbjhqS3BSSTM0NVVtYldCbm5DYXh1N0FPQ0tDVkFTZmU4cmdBYlNKSjdfdWZvZw&q=https%3A%2F%2Fwww.ebay.com%2Fitm%2F284068739986%3Fhash%3Ditem4223d0fb92%3Ag%3AU4UAAOSwa39fo2v1&stzid=Ugy5l1qvfbNERoAQ_WN4AaABAg.9Rt10qDyzRI9SFFC2AGk-a

[@moommmoom]

Is the brake connecter NO or NC?

[@dylanmoore1006]

Wym?

[@moommmoom]

@@dylanmoore1006 the brake switch connector has to stay open, or it has to be shorted like the key connector?

[@fritzakah4375]

I know I’m late but can you please find me a battery for the razor power core e100

[@dylanmoore1006]

What kinds of battery are you looking for? One to replace the original, or an upgraded battery?

[@fritzakah4375]

@@dylanmoore1006 I’m trying to upgrade from 12v to 24v if you can find a link on Amazon that would be great but if any site works best for you that’s ok

[@dylanmoore1006]

24v battery packs can be difficult to find on Amazon I could go on aliexpress and see if they have any 24v rated batteries at least 8ah

[@fritzakah4375]

@@dylanmoore1006 ok then can you try eBay then ali express please sorry for pressing you

[@sumopanda5070]

If i add 48v to a 36v hub motor would i harm my controller or motor?

[@dylanmoore1006]

You would need a "hall sensor" speed controller which is slightly different. Once you hook it up to one of those it works perfectly fine but you need to do a bit of custom fitting to put the hub motor on

[@sumopanda5070]

@@dylanmoore1006 Thank youf

[@derickvorpagel]

I don't have power locks one

[@dylanmoore1006]

@derickvorpagel On some speed controllers they don't have a keyswitch plug. They usually have a red ground wire and you ground your switch between the ground and the positive pole of the battery.

[@oktdude]

From where did you get the throttle? And how much was it. I’m trying to get into modding my razor scooter and I was wondering if I change my controller to 48v and 1000w and I want to get the most out of it so I have to change my motor and batteries as well? I have a low budget btw. Thank you!

[@dylanmoore1006]

Ebay man! Always trust eBay these days they have good cheaper China throttles and econtrollers

[@oktdude]

@@dylanmoore1006 thanks man!

[@oktdude]

@@dylanmoore1006 I know you said eBay but dk you think this throttle and controller will work? Here’s the link: www.walmart.com/ip/LYUMO-48V-Brushed-Motor-Controller-48V-800W-Brushed-Speed-Controller-Kit-for-Electric-Bike-Motor-Scooter-with-Lock-Throttle-Grip/674606214

[@derickvorpagel]

What's the hall hook to

[@dylanmoore1006]

@@derickvorpagel The hall hook is only used on brushless speed controllers and motors. It is important to know which speed controller is the correct option for your motor.

[@kizzy2254]

why does my razor e100 not go above 20kmph on 36v 800w

[@dylanmoore1006]

Gearing, trust me

[@health1st189]

Hey man was wondering if you could help me out ? I know you said the 1800w speed Controller is trash lol but thats what i ended up getting 🤷‍♂️ wish i saw this cideo before buying. Anyways, i am having trouble with the yellow and blue wires from throttle?

[@dylanmoore1006]

oh so the yellow and blue wires serve as your key/switch unit. You have to connect them to your throttle and switch the wires twice if you have problems the first time because if they are reverse connected it makes it where the throttle will show on while the key is off, thats if you have a throttle with a meter. You also have to make sure that the throttle wires are connected correctly or else it will show weird signs... if it still doesn't work chances are you could have popped the controller but thats only if you connect the battery incorrectly... Hope this helps

[@health1st189]

@@dylanmoore1006 i have the same throttle you have and you said to connect the yellow amd white to the throttle ?

[@health1st189]

@@dylanmoore1006 on the speed Controller diagram it says that the red wire with the circle washer end has to be connected ?

[@dylanmoore1006]

@@health1st189 you cant use that type of controller for this setup you need to have the one that I have exactly link in desc

[@health1st189]

@@dylanmoore1006 oh ok thanks for letting me know 👍 I do have another 48v throttle you know the one with the chrome ends and volt reader ? The red, green and black are connected but, not sure where the other 2 wires go? Really appreciate your help 🤛

[@florin699]

Tester pentru verficat senzorii hall

[@loyaltyovermoney5942]

Can some one tell me wht is the brake cable for and the electronic door lock

[@loyaltyovermoney5942]

4 months later no one replied but I figured it out n got my scooter running again

[@MellHanna-y8p]

I couldn't get it to work with my engine ebie

[@dylanmoore1006]

Is your engine a brushed motor or is it brushless?

[@the_dirt_bike_guy1]

Mine still turns on when I put the battery in

[@dylanmoore1006]

Wym?

[@smoxesss]

time for me to learn

[@connor9801]

Just put a 48 volt 1000 watt speed controller on my mx350 and it is fast

[@dylanmoore1006]

Nice I did mine while back and it goes like 25

[@connor9801]

Did you have problems with the pegs for your feet because they are soo high

[@dylanmoore1006]

Oh yes I'm 5'10

[@connor9801]

How did you charge it?

[@dylanmoore1006]

@@connor9801 I lucked out on one from Ebay for 3 on a bid and it was a honeycare 48v 2.5 amp charger... most cost around 35 to 40

[@samsujeseema4458]

V48 250w e bike controler price in India

[@ethannorman132]

Figured nothing out on my own