Wood and Leather Branding Iron // Gearheart Industry Stamp Review

  Рет қаралды 19,580

Craftswright

Craftswright

Күн бұрын

Пікірлер: 45
@no1medic
@no1medic 4 жыл бұрын
Food part was the best , I actually giggled and wanted you to keep branding more food
@Craftswright
@Craftswright 4 жыл бұрын
Hahaha maybe I should start a second channel solely based on branding food. Would be super niche that’s for sure Thanks for the laugh Nobody 😄
@jbratt
@jbratt 3 жыл бұрын
I just received my iron from Gearheart. My experience was like yours, excellent. Watching your video I am bummed I didn’t order the deeper cut stamp that can be used on leather and food. I could go for a branded taco right now. Thanks for the video 👍
@rballew8120
@rballew8120 2 жыл бұрын
I couldn’t help but notice the “CV” in your logo looks very similar to the logo for my old Boy Scout camp Cedar Valley (PTR) in Arkansas. The camp is no longer owned by BSA. Just wondering if you might have camped there in years past? The logo brought back some great memories.
@JohnSmith-qc6bq
@JohnSmith-qc6bq 5 жыл бұрын
Thank you for the review , I am thinking of getting one of these (electric version), and appreciate your time in sharing this with us.
@Craftswright
@Craftswright 5 жыл бұрын
If I had to do it all over again, budget willing, I would go the electrically heated route too!
@whitetailstudio
@whitetailstudio 2 жыл бұрын
That is so me. My wife would be like “ What in this house haven’t you branded”…LOL
@lexigrenzer6523
@lexigrenzer6523 3 жыл бұрын
Do you ever get fire scale build up? If so, can you suggest how to avoid?
@LarryDMitchell
@LarryDMitchell 3 жыл бұрын
Is there a reason other than cost that you didn't select the brass stamp? How is yours holding up now in late 2021?
@christofix
@christofix 5 жыл бұрын
very nice, i would like to have something like this, where did you bought yours?
@Craftswright
@Craftswright 5 жыл бұрын
www.gearheartindustry.com/
@halimmouawad6256
@halimmouawad6256 3 жыл бұрын
HI. where can i buy this stamp ? Thank You 🙏🏽
@TheKostad
@TheKostad 3 жыл бұрын
Where did u order your iron stamp from? OCD calling!!!
@craigwesson1788
@craigwesson1788 4 жыл бұрын
Good review ! how did you design your logo. A particular program ? cheers
@Craftswright
@Craftswright 4 жыл бұрын
I usually design in Illustrator but there are several good vector alternatives out there from what I understand
@craigwesson1788
@craigwesson1788 4 жыл бұрын
Craftswright thanks 😊
@KRSound
@KRSound 4 жыл бұрын
@@craigwesson1788 If you can't afford Adobe Illustrator, look into Affinity Designer. It's $50 and does 90% what Illustrator can do. affinity.serif.com/en-us/designer/
@zacharyfritz6439
@zacharyfritz6439 5 жыл бұрын
What size iron is the one you have? I’ve been looking at getting one and that size looks good for me. Thanks! Great video!
@Craftswright
@Craftswright 5 жыл бұрын
I had mine made at 1.75”x1.75” Cheers!
@nicksvaik
@nicksvaik 5 жыл бұрын
I came over from the MFP fb group! Great video I am also in the market for a brand, I think I'm going to splurge on an electric one to simplify the heating process
@Craftswright
@Craftswright 5 жыл бұрын
If I had the funds in the budget at the time, I would have done the same thing. Had a batch of product to go out to a client by a deadline though so it was either no brand, or get the torch to brand my work. I wonder how fast the electric heats up? I’ve also considered converting this to electric at some point in the future.
@DixyPro1
@DixyPro1 3 жыл бұрын
Good job. I was able to make one that works on 12 volts
@dpwoodworks
@dpwoodworks 5 жыл бұрын
The torch leave a little bit of black residue on the iron which helps the burn stand out.
@Craftswright
@Craftswright 5 жыл бұрын
Hadn't thought of that, good call!
@warrenkaye8679
@warrenkaye8679 4 жыл бұрын
What is the size you had made? Looks great
@warrenkaye8679
@warrenkaye8679 4 жыл бұрын
I see you answered it sorry
@hollibernier8912
@hollibernier8912 2 жыл бұрын
your hilarious...and I need to up my stamping game!
@jimh472
@jimh472 4 жыл бұрын
Great vid. You should get the Gearheart folks to give you an affiliate link.
@harleywood9588
@harleywood9588 2 жыл бұрын
Thanks for the review. It’s hilarious
@raylares
@raylares 3 жыл бұрын
I think the hot plate took so long because you were heating only the portions of the brand that were touching the hot plate. As such there was not enough metal that was really hot and the brand cooled down very quickly leaving a poor quality burn. When using the torch, you heat both the portions of the brand touching were touching the hot plate plus all of the background metal. Since the entire block of metal was hot, it retained its heat while burning the material.
@StuffUCanMake
@StuffUCanMake 5 жыл бұрын
Good review. Thanks.
@Craftswright
@Craftswright 5 жыл бұрын
Thanks friend!
@kershenn
@kershenn 4 жыл бұрын
Craftswright "i mean, i almost want to brand every single taco i make now" Me: .... 💀.... ps, great review, it caused me to order one
@Craftswright
@Craftswright 4 жыл бұрын
Brand those tacos yo! 😂
@cupojoebrand6158
@cupojoebrand6158 5 ай бұрын
Karen in accounting always be forgetting her lunch. Sheesh! 🙄 😂
@tiberiusmogaka2874
@tiberiusmogaka2874 4 жыл бұрын
Great video. You should have branded your hand. It could be an easier way to get a tatoo.
@Craftswright
@Craftswright 4 жыл бұрын
Hahaha good point. Kind of worries me though how many people suggest I do that 😂
@tiberiusmogaka2874
@tiberiusmogaka2874 4 жыл бұрын
Do not worry. It was on a light note.
@Craftswright
@Craftswright 4 жыл бұрын
I figured, just can’t seem to make the connection haha
@MrBrewzr
@MrBrewzr 5 жыл бұрын
I would probably still be branding stuff
@Craftswright
@Craftswright 5 жыл бұрын
Hahaha I haven't stopped. My shop looks like some sort of sick shrine to my own company 😂
@ryananthony4840
@ryananthony4840 2 жыл бұрын
Great video, but if you're gonna do a voice-over that doesn't match your lips you should go all-in and put subtitles at the bottom like the old kung-fu movies lol lmao
@chrisreynolds2410
@chrisreynolds2410 2 жыл бұрын
Way to long to heat up.
4 Branding Iron Tips
11:49
The Whiskered Woodsmith
Рет қаралды 70 М.
Branded Embossing Stamps - Which one is right for you?
6:32
J.H.Leather
Рет қаралды 44 М.
Une nouvelle voiture pour Noël 🥹
00:28
Nicocapone
Рет қаралды 9 МЛН
It’s all not real
00:15
V.A. show / Магика
Рет қаралды 20 МЛН
Каха и дочка
00:28
К-Media
Рет қаралды 3,4 МЛН
Hex N Hit Stamp Review
6:45
Addictive Archery
Рет қаралды 45 М.
How to Make a Branding Iron
14:42
DMaker
Рет қаралды 139 М.
A Great Branding Iron - The branding iron I use in my woodworking shop. - Gearheart Industry
13:53
WB Fine Woodworking With Don Bullock
Рет қаралды 8 М.
TOOL REVIEW: Gearheart Industry TC-5 Smart Branding System
6:31
RB Wood Creations
Рет қаралды 1,1 М.
Branding with an actual Iron! Easiest Solution!
7:57
Laura Kampf
Рет қаралды 482 М.
INEXPENSIVELY Brand Your Woodworking - 123
3:46
Jay Bates
Рет қаралды 188 М.
Trying out my new Branding Iron (this is way too fun!)
8:48
Home Built Workshop (Jeff Baker)
Рет қаралды 32 М.
Making a branding iron
17:39
Torbjörn Åhman
Рет қаралды 693 М.
Une nouvelle voiture pour Noël 🥹
00:28
Nicocapone
Рет қаралды 9 МЛН