Woodturning. Never suffer tear out with your carbide chisels.

Never suffer tear out with your carbide chisels.
To buy any of my Carbide tools or cutters visit my website;
www.ukwoodcraftandcarbidechisels.co.uk
www.buymeacoffee.com/glennliza
Thanks for watching.
#Axminster 1628 lathe.
#wood
#woodturning
#carbide chisels
#Pine
Please Note;
These videos are meant for the purposes of entertainment. Any attempt to imitate or copy what I do must be done at your own risk. My practices may not always be correct or the safest for you. I strongly recommend that you find your own way of turning. You are responsible for your own safety while woodworking. Read and understand the operation and safety manuals supplied with your tools and machinery to ensure you are safe while using such equipment.

[@markduggan3451]

I think you just taught me why I break so many pots. All I need to do now is practice more. Just need my painkillers to kick in, and I can get back into the shed. Thank you both.

[@glennteagleofukwoodcraftca5308]

Practice practice practice, that's what I say. You'll get there. Happy turning mate.

[@JohnBrown-tm9jx]

I have watched hundreds of turning videos but I regard you as the best. I have several of your carbide tools and I find for my purposes they meet all my needs, so much so that I have all but abandoned my traditional tools.

[@glennteagleofukwoodcraftca5308]

Thank you so much. Much appreciated. Master them all. Don't be a slave to any. That's what I say. Glad you are enjoying using your carbides though. Happy turning.

[@johnstpierre8909]

John St Pierre Have used your information and improved my turning. Your instruction is very useful. Thank You

[@glennteagleofukwoodcraftca5308]

Glad the videos have helped you. That's what they're about. You are very welcome.

[@GavSedae]

Brilliant explanation, probably the best I've heard about endgrain cutting. Great job guys

[@glennteagleofukwoodcraftca5308]

Thanks Gav. Really appreciate that.

[@joediberardino4419]

Great info i lot learn a lot thank you Glenn

[@glennteagleofukwoodcraftca5308]

Thank you Joe. Glad you found it helpful. More to come.

[@nigelharvey210]

pig and cow thingis brilliant, but never the less a great tutorial thanks

[@glennteagleofukwoodcraftca5308]

Thanks

[@allanjgray1]

Thank's for this one mate !

[@glennteagleofukwoodcraftca5308]

Glad you liked it.

[@fxm5715]

Nicely explained. Thank you.

[@glennteagleofukwoodcraftca5308]

Thank you. Welcome to the channel. Have you subscribed yet? It helps the channel and if you hit the notification bell you will be alerted as to when we put out new videos. All full of fun, tips and techniques. Glad you enjoyed the video and found it helpful. Toodle pip for now. Glenn & Liza

[@OregonChuck]

I've been turning with carbide from a much more famous U.S. company. You know who it is, nice people. No one has ever shown me how to maximize the results of my turning. It's always been, "Well, some tearout is to be expected." I'm going to watch more of your videos and buy at least one of your tools, maybe the 9mm. Thank you for your help. I'm going to Google where to buy them.

[@glennteagleofukwoodcraftca5308]

Welcome to the channel. If you are subscribed to the channel, by pressing the notification bell, you will be notified when we put out new videos. Subscribing helps the channel to grow. Thank you in advance. Tear out is not necessary. Can be dealt with if you cut and not scrape with your tools. It's all about tool presentation. www.ukwoodcraftandcarbidechisels.co.uk but we only delivery to the UK. No overseas shipping I'm afraid. Not at present anyway. Happy turning.

[@michaelwillson6847]

Cracking video M8 proper informative and masses of information for someone relatively new to it like myself so thanks for that 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@glennteagleofukwoodcraftca5308]

Thanks Michael. Glad you found it helpful. Happy turning fella.

[@user-yc6qt5nx1j]

.Glenn Thanks for the lessons. I'm very new to this and I really appreciate and enjoy your channel.

[@glennteagleofukwoodcraftca5308]

Thank you Jeffry. Glad you are enjoying the channel and finding the videos helpful. We try to make them light-hearted, fun and informative.

[@jonnyslathecrafts]

Thank you for this demo.

[@glennteagleofukwoodcraftca5308]

You are welcome

[@alangibb3100]

Glenn & Liza Some fantastic information there mate and some great demos to show how to do it as well. Well done.

[@glennteagleofukwoodcraftca5308]

Thanks Alan. Glad you liked it.

[@danielmierop662]

New to turning, good at sharpening, I’ve learned a lot from you guys!, I began with standard tooling…….. I catch less as time goes by. I truly liked that you showed angling the carbide tool and close up shots to leave no question of what Patrick’s of the cutter to maintain focus on. When I first began thinking carbide was to be a flat level scraper.☹️🤔 I now concentrate on what way tools are presented to the work. Thank You from New Hampshire USA

[@glennteagleofukwoodcraftca5308]

Welcome to the channel. Your comment is greatly appreciated. I always say use a mixture of all tool. Master of all, slave to none.

[@user-qf3kx9qb3c]

Excellent video, going to make my big pile of cedar a lot easier to work, thank you so much.

[@glennteagleofukwoodcraftca5308]

Welcome to the channel. Thanks for watching. Glad we could help. That's what it's all about. Happy turning.

[@perrys5954]

I am in awe of your skills! I am very much a newbie but cannot wait to get home from this night shift so I can try some of what you have taught me out! Thanks for sharing your wisedom and experience, I had no Idea carbide could cut this nice!

[@glennteagleofukwoodcraftca5308]

Welcome to the channel Perry. Thank you so much. Really appreciate that. If used correctly, carbides cut brilliantly. Just practice practice practice, you'll get there. Happy turning.

[@mashmade-airth]

Hi guys, all good I hope. I've been quiet & lying low recently, you'll know why. Glenn your explanation of riding the bevel & bevel control is so much better than others I've seen & heard, so much easier to pick up & understand the way you explain & show it 👍. I'll be in touch soon. Keep well and stay safe 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@glennteagleofukwoodcraftca5308]

Thanks Jim. We were just saying, we haven't heard from you in a while. Keep well too mate. Look after yourselves. Love to Christine. Catch up soon. All's well here. Glenn & Liza

[@JOhn-qz2vi]

I don't think I have watched one of your videos where I have not learnt something, thanks.

[@glennteagleofukwoodcraftca5308]

Glad you have enjoyed the videos and have found them helpful. Much appreciated.

[@fergusrb]

I love your technical discussions, very helpful. I don't know how hard it would be for you to have play lists like for your 3 tool series. I think you did the same type discussion on bowls but don't know which video. That is where playlist would be helpful to find stuff. Thanks again for the discussion learning a lot..

[@glennteagleofukwoodcraftca5308]

We can just about upload videos to this thing. We need a couple of teenagers to do this sort of thing. Lol. We will do another one on tear-out on bowls.

[@RcWoodturning]

​@@glennteagleofukwoodcraftca5308Hey Glenn. Are you saying you can't do playlists or you don't know how? It's pretty easy in youtube studio.

[@glennteagleofukwoodcraftca5308]

@@RcWoodturning No one has ever asked us for that before. We have almost 500 videos. What I really want to know, is what do you do to get 1million views on a video. I just get told I'm dangerous for putting a candle near a piece of wood. Lol

[@RcWoodturning]

@@glennteagleofukwoodcraftca5308 join the club! People love to talk about things they know nothing about. You know I've studied all my analytics and I can't figure out how that video got to a million views. I posted a couple after it and they performed better but never took off. My only conclusion is it was just random chance. It's really frustrating because I don't know what to do to make it happen again. I guess you have to post the video and hope for the best.

[@glennteagleofukwoodcraftca5308]

@@RcWoodturning We are the same, just keep putting them out there. It's just hard finding things to turn.

[@mnp1964]

Thanks Glenn good teaching too bad you won't ship to Canada or I would buy some of your carbides

[@glennteagleofukwoodcraftca5308]

I know Wade. Customs is the issue. We are looking into it, so keep watching this space. The website and KZbin vid will be updated when we can.

[@safe1968man]

Love it great explanation. Am I correct that you don't sell to America? If that's true is there an American equivalent to your tools? 😊

[@glennteagleofukwoodcraftca5308]

I'm afraid we don't at present, but looking into it. I don't believe there is an equivalent to my tools. Never seen anyone else demonstrate their tools the way I do. They all call them scrapers.

[@ChristopherThomas-td7kz]

How can I get some tools from you

[@glennteagleofukwoodcraftca5308]

www.ukwoodcraftandcarbidechisels.co.uk as long as you are in the UK. We do not ship overseas at present.

[@victorylatheworks873]

I wish you shipped to the US, I really like your video's but they are less useful because I can't get your chisels...

[@glennteagleofukwoodcraftca5308]

We are currently looking into it maybe with FedEx. They are not cheap. We will update on the channel and website when we have confirmed everything.

[@GavSedae]

Get them ordered to a UK address and get someone to send it on to you would probably be your only option

[@victorylatheworks873]

@@GavSedae I don't know anyone in the uk...