Woodworking shop tour - Oddball Gallery

Although you may know me as the guy who made the plywood ball, or the big ball guy, I am a full time cabinetmaker/woodworker.
Fastcap Bowtie clamp amzn.to/2Vy9bM7
Forrest Woodworker II amzn.to/3buyTqp
Forest 6" blade stabilizer amzn.to/2x9ddRS
Dewalt 716 Miter saw amzn.to/2VOhqTe
Mirka Deros 5" random orbit sander amzn.to/2KtKOZH
Fein Turbo dust extractor amzn.to/3bBjnJc
Fein re-usable fleece filter amzn.to/3axGkMm
Bosch right angle drill/driver amzn.to/3cO77VU
Grizzly GO514x2 19" bandsawamzn.to/2S4njdP
Grizzly 20" planer amzn.to/3axAVVp
GE SUPERRADIO -- sorry no longer available
This video is NOT sponsored. These links are for some of the tools that I like and have used for many years. If you buy from these links I will receive a small affiliate commission. Thanks

[@MarkThomas123]

Love that shop tour.. Nice to see a professional shop setup. Gave me lots and lots of ideas.. Love the Dust Collection systems you have in the shop.. Keep that warm/cool air in the shop where it belongs. Just clean it like it should be cleaned.. Love those Downdraft tables.. Hope you keep making videos.. Thanks for the ones you did put out.. The shop tour was really awesome..

[@KitoMarchetaria]

Thank you very much for sharing the entire industrial residential complex you created, many years of accumulated experience!!!

[@ODDBALLGALLERYKeithWilliams]

No prob...Thanks for watching.👍🏼

[@danebroe6067]

Love the line up of rollout machines along the wall. Some really great dust collection concepts. Very impressive!

[@ODDBALLGALLERYKeithWilliams]

Thanks!

[@bigdogmn73]

Love your shop and all your great ideas for dust collection. Amazing! A+ job!

[@rroe5718]

Been awhile Keith and I was excited to get the bell rung that you had a new video. You Sir are the engineer of shop designs. This was a great tour and very educational to see how you went about having, needing and using the equipment you have. Some is just so amazing. You have a lot to be proud of here. Great Job!!

[@ODDBALLGALLERYKeithWilliams]

Thanks you, I'm trying to use my downtime to get some more oddball videos in the pipeline.

[@jmcsjoe8198]

I'm in the building stage. I've watched a ton of videos. You sir are an inspiration, your shop, your inventions, and prestation. Thank you for sharing this. Can't wait to see more!

[@ODDBALLGALLERYKeithWilliams]

Thanks👍🏼 Nothing more exciting than planning a new shop. In my opinion, dust collection is the most important factor in designing a new space.

[@DreamWorksWoodShop]

Keith, I really enjoyed the shop tour, thanks for sharing. Really loving many of your machine modifications,.. I look forward to following along. Continued success Keith!

[@ODDBALLGALLERYKeithWilliams]

Thanks 👍🏼

[@felixfromnebraska8648]

Keith, your shop is well thought out and functional. I'm impressed with the tools that you have custom-built and or adjusted for your use in your shop. I enjoyed this video and will look forward to the next on. Thanks for sharing. Felix!

[@ODDBALLGALLERYKeithWilliams]

Thanks 👍🏼 While there is no substitute for square footage, I feel I am using my space effectively. What I lack is space to store finished cabinets. I usually have to put stuff in my enclosed trailer to get it out of the way. Thanks for watching.

[@lostinadream1866]

Great tour, I love how you invent stuff!!

[@ODDBALLGALLERYKeithWilliams]

Thanks, I enjoy thinking of new ways to do things. 👍🏼

[@WarrenDrakeVRN]

Love the shop! Very well thought out.

[@ODDBALLGALLERYKeithWilliams]

👍🏼 Thanks Warren

[@ivoexposto5466]

Love the tour!Thank you

[@ODDBALLGALLERYKeithWilliams]

Thanks for watching 👍🏼

[@TBIZ8325]

Awesome shop! One of the few shop tours I was able to watch all the way through with out fast forwarding at all. Nicely done. You obviously have a lot to offer in the way of knowledge and expertise. I would love to see some build videos from you. Especially on that sanding table. I'm just getting started in woodworking so I'm hungry for knowledge. Basic cabinet making videos would be awesome too. Can't wait for the next video.

[@ODDBALLGALLERYKeithWilliams]

Thank you👍🏼 I think I may do a build video with a smaller version of the sanding table.

[@vaughanchapman2930]

Really awesome shop. To see that you do this for a living and still take so much pride in your shop, it’s really awesome to see. I also love that you came up with inventions to solve the problems you faced, genuine innovation. Really great video.

[@ODDBALLGALLERYKeithWilliams]

Thanks👍🏼 My shop is my business, but also my main hobby and interest.

[@tomdelese760]

I RARLEY COMMENT BUT HAD TO BECAUSE I REALLY ENJOYED THIS VIDEO.ESPECIALLY SHARING THE FAMILY ASPECT OF IT.

[@Warkive]

I've seen a lot of *lot* of shop tour videos and even though our equipment preferences differ, the thought and effort you've put into the evolution of your shop over the last twenty years is head and shoulders above everything else I've seen. I just wish I had the space to accommodate some of your ideas, especially on dust collection.

[@ODDBALLGALLERYKeithWilliams]

Thanks JD 👍🏼 I’m working on a new video. I will be building a smaller version of my downdraft sanding table.

[@austinrogers6759]

Awesome video! I loved the content and the personal experiences you shared with each machine. The music at the end was great as well! I'm looking forward to more content.

[@ODDBALLGALLERYKeithWilliams]

Thanks, random KZbin viewer. 😀👍🏼

[@austinrogers6759]

@@ODDBALLGALLERYKeithWilliams 😂

[@Tinker1950]

A very impressive shop and equally interesting presentation. It must be a real pleasure to work there - a very nice lifestyle.

[@ODDBALLGALLERYKeithWilliams]

John Walker Thanks 👍🏼

[@rafdannyboy]

Ah man! What an awesome shop! Great stuff

[@ODDBALLGALLERYKeithWilliams]

Thanks for watching 👍🏼

[@christopherbiomass7155]

Nice shop. Enjoyable tour. Kudos to you and the camera person. It kinda felt like I was there in person.

[@ODDBALLGALLERYKeithWilliams]

Thanks 👍🏼 I’m glad you liked the video, I will relay the compliment to my wife (camera person)

[@jakube5543]

keep doing what you do, really cool!

[@ODDBALLGALLERYKeithWilliams]

Thanks, i'm working on a few new videos.

[@guybowers9094]

I'm in the process of building a nearly 800 sq foot shop and this tour has given me some ideas about how to set it up. Also, I really like the tools you have made yourself very impressive. AND a very good job on the narration thanks for the tour oh and I just subscribed

[@ODDBALLGALLERYKeithWilliams]

Thanks Guy, I appreciate the sub👍🏼 Working in a small shop for a while let me know what was really important. Dust collection / air filtration is high priority for me.

[@binbalebardac4156]

Subscribed just because of the Hi-Fi SUPER RADIO!!!!!!!! But seriously, my favorite shop tours are real production shops and seeing what tools and brands they choose to to do daily production work on.

[@ODDBALLGALLERYKeithWilliams]

👍🏼 Thanks for watching and subscribing.

[@jaybushey873]

"Big sucker"- because its a dust collector. Good one! Nice shop, I love the sanding table, I might have to steal that design when I build one for my shop!

[@ODDBALLGALLERYKeithWilliams]

Ya, it wasn’t my best joke ever...but it was up there. I’m thinking about doing a build video with a smaller version of the sanding table.

[@kellyklaask7su990]

Very impressive tour. I was quite intrigued with your ball lathe. That is quite clever!

[@ODDBALLGALLERYKeithWilliams]

Thanks for stopping by 👍🏼

[@s9plus20]

Super nice shop! Well thought out. I've got a Super Radio too! Love that donkey drawer!!

[@ODDBALLGALLERYKeithWilliams]

Thanks Frankie, We are brothers in Super HI- FI. 👍🏼😀

[@AlbanyHauntCA]

You have an awesome shop. So many elegant solutions! Thanks for sharing. BTW I made a 57" 3v sphere using your method.

[@ODDBALLGALLERYKeithWilliams]

Thank you, Super cool👍🏼 I would like to see your sphere, I have not made one that large yet. How big were the triangles to get 57". I you want, you can send a picture to [e-mail]

[@reggiesmith6423]

You are definitely not the average woodworker. Very impressive dust collection.

[@ODDBALLGALLERYKeithWilliams]

Thanks👍🏼 I try to put the most effort into collecting the fine dust. The big stuff is easy to sweep up.

[@itsmejoe6718]

Great commercial shop, sanding table great. Most shops I look at on youtube are home shops( two car garage size) not quite like yours. You have great machines, plenty of space. Good video.

[@ODDBALLGALLERYKeithWilliams]

Thanks Joe, If I could have more space it would be for temporary storage of finished cabinets. Right now I use an enclosed trailer for that.

[@amywilliams3745]

Awesome tour! I like the SuperRadio most! 🤣🤣

[@ODDBALLGALLERYKeithWilliams]

It is extra de-lux 👍🏼

[@woodbe5311]

that sanding table is impressive :) i´m building one now and that idea it fits well in my project. Thanks for sharing it :)

[@ODDBALLGALLERYKeithWilliams]

👍🏼 I think a sanding table is as important as the sander. They are also good for general shop air filtration. Good luck with your project.

[@DeansWoodworking]

Great shop thanks for sharing

[@ODDBALLGALLERYKeithWilliams]

Thanks 👍🏼

[@vansage2691]

Nice shop. More videos on those dust collector designs would be awesome!!

[@ODDBALLGALLERYKeithWilliams]

Thanks 👍🏼 I'm thinking about doing a build video with a smaller version of the downdraft table.

[@fleetswoodshop3339]

GREAT.GREAT SHOP LOVE YOUR LAYOUT

[@ODDBALLGALLERYKeithWilliams]

Fleets Wood Shop Thanks 👍🏼

[@rldoyle5705]

Cool shop thank for your time

[@ODDBALLGALLERYKeithWilliams]

RL Doyle 👍🏼 Thanks for watching.

[@MrBrewzr]

Nice shop, the donkey drawer was my favorite.

[@ODDBALLGALLERYKeithWilliams]

Even if I do organize that tool box, I can never clean out the donkey drawer. 😀👍🏼

[@biedawo]

Nice dust collection setup by stations; especially for your ball shaper.

[@ODDBALLGALLERYKeithWilliams]

Thanks 👍🏼 The ball shaper makes a lot of dust , but I am able to catch most of it.

[@07roadking43]

Kool shop !!!

[@ODDBALLGALLERYKeithWilliams]

Thanks 👍🏼

[@aufish2311]

Love your workshop and all of the great mods you made. Subscribed and will follow. Love your donkey drawer.

[@ODDBALLGALLERYKeithWilliams]

Thanks, I can never clean out the DD. 😀👍🏼

[@vubdub1967]

He had me till he started bragging about his Super Radio. Not all of us can have such nice things in our shops. You sir are out of touch with reality. Just kidding. I love the shop especially the family history. Beautiful.

[@ODDBALLGALLERYKeithWilliams]

I’m normally a humble carpenter... but when you have superior hi-fi you gotta flaunt it.

[@ericoleson5083]

I would definitely buy plans for all the custom dust collection cabinets if they were available. Great video!

[@ODDBALLGALLERYKeithWilliams]

I have considered doing a build video with a smaller version of the downdraft dust table.

[@therianstrauss]

That was fascinating thanks for sharing

[@ODDBALLGALLERYKeithWilliams]

👍🏼 Thanks for watching

[@jasonsocquet8555]

Wow, impressive setup.. subscribed!

[@ODDBALLGALLERYKeithWilliams]

Thanks 👍🏼 Welcome to the channel. I'm going to do my best to get some more content on here.

[@fleetswoodshop3339]

great shop tour .love it thank you.from doug

[@ODDBALLGALLERYKeithWilliams]

Thanks for watching Doug 👍🏼

[@rev.twilson7300]

Very nice shop and layout. I love your dust collection systems. Buuuuuuuuuuut I know you miss the KX 500, but is was a tank on two wheels. I know, been there done that. The saw was a nice up grade and a safer machine with less repairs. Nice video.

[@ODDBALLGALLERYKeithWilliams]

Thanks 👍🏼 The KX wasn't the best handling bike , but it was fast and loud and thats all that mattered to me. 😀

[@mechminded2207]

I like the sanding station.

[@ODDBALLGALLERYKeithWilliams]

Thanks👍🏼

[@lesleyyoung5730]

You have an awesome shop, do some great pieces, you need to upload more videos!

[@ODDBALLGALLERYKeithWilliams]

Thanks👍🏼 I’m working on a few more videos. I’m a little slow though. 😀

[@lesleyyoung5730]

@@ODDBALLGALLERYKeithWilliams Well get your butt moving, can't wait to see all your future videos! 😉

[@disarrodriguez8719]

upload more videos, which are incredible, greetings from guatemala !!

[@ODDBALLGALLERYKeithWilliams]

Thanks👍🏼 I am working on some new stuff.

[@thomashverring9484]

The donkey drawer :D Love your shop and your creative way of thinking.

[@ODDBALLGALLERYKeithWilliams]

Some say it’s a weird way of thinking...but creative is good too.😀

[@billthomas6296]

Keith, I love your shop. Excellent job on the video and guided tour. I am really bummed that the GE SuperRadio is no longer available. I like the dust collector table and would like to make one for myself. Maybe when the time comes, and need be, you could offer up some advice. Again thanks for the tour Keith.

[@ODDBALLGALLERYKeithWilliams]

Thanks Bill 👍🏼 The SuperRadio was a limited edition, they only made them form 1983-2005.😀 I have been thinking about doing a build video making a smaller version of the sanding table. Feel free to ask questions if you get to the project before that.

[@mikefuson176]

I liked the shop tour. I have some of the same machines as you. I’m totally ripping off the idea of the pulling each machine out as you need it. The blast gates are genius. I’ve got spiral heads on my jointer and planer, do it for sure and you’ll wish you had done it sooner. Thanks for making the video.

[@ODDBALLGALLERYKeithWilliams]

Thanks, I hope some of my ideas help you out. I may just buy a new planer that has the cutter head in it and then sell my old one. Do you have a grizzly or shellix?

[@mikefuson176]

@@ODDBALLGALLERYKeithWilliams I have a 15” shop fox and put a shellix on it, wished I had bought a bigger planer with one already on it. Just bought a 8x76 grizzly with the helical head and really like it.

[@ODDBALLGALLERYKeithWilliams]

I have heard the grizzly helical heads are still pretty decent.

[@mikefuson176]

@@ODDBALLGALLERYKeithWilliams I love the 8x76 jointer with the helical head. A lot of cabinet guys down grizzly machines but I have several and I’ve never had a problem. Their shaper fences suck as you mention, so I made homemade ones like you did. Shop fox has them beat bad on the fences. I’ve got 2 shop fox, 2 grizzly, 1 powermatic in shapers for making doors.

[@ODDBALLGALLERYKeithWilliams]

@@mikefuson176 Yep , Grizzly has come a long way. I think I’m going to get the Grizzly head for my jointer. It looks like I can upgrade to the planer with the helical head for 1G more than the cutterhead alone. (Including selling my old planer)

[@theartifactguy7399]

My workspace has most definitely been in the same state many times!

[@ODDBALLGALLERYKeithWilliams]

The Artifact Guy I usually work till the job is done, and clean up at the end.😀

[@theartifactguy7399]

@@ODDBALLGALLERYKeithWilliams while my workspace is much smaller I do the same

[@DIYMinded]

Nice shop! Subscribed.

[@ODDBALLGALLERYKeithWilliams]

Thanks, I appreciate it. 👍🏼

[@rrmerlin3402]

" The pullout wall " Yes, I'm going to make one in my shop

[@ODDBALLGALLERYKeithWilliams]

👍🏼

[@jeremyt1917]

Awesome shop and inspiration! What are the filters you are using in your dust collector and down draft table?

[@ODDBALLGALLERYKeithWilliams]

Those are polyester felt. The place I bought them is no longer around. Oneida air systems has them, but they are pretty expensive. I am trying to find them cheaper so I can do a build video with a smaller version of the sanding table.

[@ratinhoff]

Awesome shop! It`d be great a video explaning how u made the sanding station, impressive!

[@ODDBALLGALLERYKeithWilliams]

Thanks...My next video will be a sanding table build series. I will be building a smaller version of the one in my shop. I will have plans and materials list available. Stay tuned. 👍🏼

[@ratinhoff]

@@ODDBALLGALLERYKeithWilliams Do u remember the model of the blower? Is it a 1hp?2hp?

[@ODDBALLGALLERYKeithWilliams]

@@ratinhoff The one in my shop is 3/4HP. The one in the sanding table video is listed in the video description.

[@drthik1]

Awesome

[@ODDBALLGALLERYKeithWilliams]

Thanks 👍🏼

[@terrancedixon5725]

You are a pro sir thank you

[@ODDBALLGALLERYKeithWilliams]

Thanks for watching 👍🏼

[@jamiehageman6191]

Awesome tour! On the sanding table where did you get the filters?

[@ODDBALLGALLERYKeithWilliams]

Hey Jamie, I am working on a sanding table build video right now. I had trouble finding (at a reasonable price) the same filters and rings I used before, so I changed the design a little. I will have sources for the parts and specs. available - Keith

[@houtslager]

A damn fine shop there sir. and some good working practices , might even nick a couple if you don't mind :D Karl W

[@ODDBALLGALLERYKeithWilliams]

Thank you.👍🏼 Feel free to nick. 😀

[@watcherdude1330]

Wow is all I have to say. First time viewer and newest subscriber. You have a small factory not a shop. You have OBVIOUSLY worked very hard for what you have and you must be excellent at fabrication. What do you do as a income or are you retired and enjoying an amazing hobby in a incredible small factory?

[@ODDBALLGALLERYKeithWilliams]

Thanks for the sub👍🏼 I’m not retired yet , I build all kinds of custom wood stuff in my shop. Not many kitchen cabinets though. Mostly bookcases, built ins, fireplace surrounds and such. The big balls I build are mostly for fun.

[@DIYBuilt]

Hey, I just found your channel through suggested videos. That was a great! Keep up the awesome content brother. Just sub’d up, cheers!

[@ODDBALLGALLERYKeithWilliams]

Thanks, welcome 👍🏼

[@darrinlloyd6301]

Very nice. Really think the sanding table is great idea. Is there any place you have plans for that table or a break down at least. I have access to bag house bags so it’s a great idea that never crossed my mind Thank you sir.

[@ODDBALLGALLERYKeithWilliams]

I don’t have a plan available. I am thinking about doing a build video with a smaller version of the sanding table.

[@woodbutcher3887]

Where did you get the machine rollers. Did you build them from parts? Enjoyed the tour, wish i had more room.

[@ODDBALLGALLERYKeithWilliams]

Hey Larry, I made the machine based out of 2 inch angle iron. They just have straight casters since they only need to roll in one direction. I think if I had twice the space I still would want more.😀

[@billwebster759]

I like the wall of machines on straight rollers. Would you use straight rollers again? Do you ever need wheel chocks?

[@ODDBALLGALLERYKeithWilliams]

The straight rollers work well for me because I don't have to turn the machines. Once in a while I have to move the wide belt to run longer stock. It has hard plastic casters, so I can slide it sideways with a little bit of effort. I usually just use a piece of 1/4 inch plywood as a chock on the lighter machines.

[@trevorburke9476]

What stops the bag in the cyclone separator being sucked up? Is there some sort of retainer?

[@ODDBALLGALLERYKeithWilliams]

You are right , that does happen. I have the bag fit over the top part of a 32 gal plastic trash can. The rim of that plastic can rests on a ledge inside the steel barrel. I found out the hard way that you can't use a 55 gal bag in a 55 gal barrel. 😀 I replace the seal inside the lid every couple years. If it can suck in air it will suck the bag up.

[@neelamharia4225]

Did like your shop tour. Do you sell plans for your sanding Table?

[@ODDBALLGALLERYKeithWilliams]

My next video will be a sanding table build. I will have a plan/ dimensions for several different sizes.

[@Everythingisgoingtobealright]

What keeps the sanding table from sucking air from the bottom tray? Where does the air exhaust? Nice shop, thanks for the tour.

[@ODDBALLGALLERYKeithWilliams]

Everythingisgoingtobealright Thank you, Nice catch 👍🏼 I have covers for the ends of the channels. The fan blows straight down, the air exhausts in the center opening on both ends. I have thought about doing a build video with a smaller version of this table.

[@Everythingisgoingtobealright]

ODDBALL GALLERY - Keith Williams A small version would be cool.

[@tomsanders9491]

I also advocate Fein tools, but last year replaced them with Festool

[@ODDBALLGALLERYKeithWilliams]

As you can tell I am not really brand loyal. Festool make some great tools. I generally lean more toward the mid price tools. I had really good luck with my Fein vac so I bought another one.

[@ronaldlee6565]

Nice Shop!! Interesting your Dad worked at Cat, I'm retired from Cat myself. Your shop is way nicer than mine but my stereo would blow yours away!!!

[@ODDBALLGALLERYKeithWilliams]

You did see I had a SUPER radio right? My dad worked in East Peoria , IL.

[@ronaldlee6565]

@@ODDBALLGALLERYKeithWilliams I worked at the Mapelton Foundry for 32 years retiring in 2008. I grew up in Pekin & still live in the area.

[@ODDBALLGALLERYKeithWilliams]

👍🏼 Dad was in machine repair building LL. I’m out in Minier.

[@ronaldlee6565]

@@ODDBALLGALLERYKeithWilliams Small world. I live about 30 min from ya. Green Acres subdivision right on 29. I admire people that take the time to video & share their ideas. Job well done & you have a awesome shop!!!

[@ODDBALLGALLERYKeithWilliams]

@@ronaldlee6565 Thanks Ronald 👍🏼

[@homerlikesbeer]

If you want to upgrade your table saw i realy recomend a sliding table saw,, the bigger the better, i have been a cabinetmaker for almost 30 years and it have been the best improvement that i have made in my shop,,belive me ,,you wont reggret it,,,. Stay safe,,,,.Saludos desde México!!!

[@ODDBALLGALLERYKeithWilliams]

I would love to have a slider. If I had enough space to keep my old saw, I would get a slider. I don't know if I could give up the versatility of the traditional cabinet table saw for smaller cuts and jigs. As usual, all of my problems could be solved if I just had a bigger shop. 😀

[@simoncornelis9240]

Nice shop! Where did you find these filter tubes?

[@ODDBALLGALLERYKeithWilliams]

That"s a good question. I tried to look up the place where I bought them, and they must have went out of business. Oneida had them for a while but I don't see them there either. Most of the big companies that make these filters don"t want to mess around with small orders. I am planning on doing a build video with a smaller version of the sanding table. When I find a new source for these I will let you know. -Keith

[@simoncornelis9240]

@@ODDBALLGALLERYKeithWilliams Thanks for your response. While searching, I have found filter bags in 12'' by 10' in polyester felt made by oneida. Maybe by cutting the top, it can be used for that. I'm lookink forward for that build project. Your video make me tidy up my workshop.

[@ODDBALLGALLERYKeithWilliams]

Simon Cornélis The Oneida tube is like the ones I used. I just cut them into three pieces. The 23$ metal ring adapter they have seems kind of expensive though . You need two per filter. I’m going to look around to find a better price. I guess the problem with something lasting 25 years is the price increase when it is time to replace.😀

[@unitwoodworking5403]

👍👍👍

[@ODDBALLGALLERYKeithWilliams]

👍🏼...👍🏼

[@billwebster759]

I'm curious why the band saws aren't turned around with the table outward?

[@ODDBALLGALLERYKeithWilliams]

When I roll them out from the wall. I can re-saw longer boards.

[@billwebster759]

@@ODDBALLGALLERYKeithWilliams But why not table side (right side) out?

[@ODDBALLGALLERYKeithWilliams]

@@billwebster759 all of the machines on that wall feed in the same direction.

[@ccfmfg]

Great Shop. Did You build The ARK?

[@ODDBALLGALLERYKeithWilliams]

No…uhhh…I used all of my gopher wood on a previous project.

[@Parafinn1970]

Donkey Draw - Brilliant....

[@ODDBALLGALLERYKeithWilliams]

👍🏼😀

[@terrancedixon5725]

Was that a Walker made into table

[@ODDBALLGALLERYKeithWilliams]

Yes, they make perfect little tables. Lightweight, adjustable legs, and you can usually find one at any garage sale. 😀

[@TheMexifry]

can you make a video about your dust collection micro switch setup?

[@ODDBALLGALLERYKeithWilliams]

I can send you a schematic of the electrical if you want. It’s pretty simple if you have basic electrical knowledge. The hardest part was mounting the switches to the blast gates.

[@TheMexifry]

@@ODDBALLGALLERYKeithWilliams that would be great. I'm just very curious to see how you set everything up with the distance and brain of the whole thing.

[@ODDBALLGALLERYKeithWilliams]

Send me an email to [e-mail] and I’ll send you a couple sketches of how I have mine laid out.

[@BCRBCRBCRBCRBCRBCR]

Too humble. That's actually a "Super Radio 3". Thanks for not bragging.

[@ODDBALLGALLERYKeithWilliams]

Wow !!! I wasn’t even aware that I had a 3. If I had known that, I would have taken better care of it. I’ve got to get it out of this dusty shop immediately. I knew It was HI-FI , but a 3...dang.

[@sochek2]

Ehh, if I had a workshop like this, I wouldn't get married at all

[@ODDBALLGALLERYKeithWilliams]

😀👍🏼

[@brandenjones716]

Now that's a shop, for one it was dirty so check and two you actually have lumber stored in there. So many fake shop tours on KZbin and these people might have one shelf of lumber on their walls or one stand up bay for a little lumber. But a real woodworker is constantly battling the lumber pile for space in the shop. I swear I have lumber freaking everywhere, my entire back wall, piled up scraps and a bunch in the roof rafters, even piles outside under tarps. Hell I think i have lost more lumber to rot and bugs then most will ever move through there shop. Really I just need a bigger shop. But it would take but a few more years to fill it up to lol

[@ODDBALLGALLERYKeithWilliams]

😄👍🏼 I have a problem with getting rid of shorts and scrap. You know, the stuff that is too good to throw away but not good enough to keep. When I cleaned out my dad’s shop I “inherited” a bunch of his lumber. If I live to 150 I will not be able to use it all.

[@brandenjones716]

@@ODDBALLGALLERYKeithWilliams the kids will appreciate it lol 😂

[@ODDBALLGALLERYKeithWilliams]

@@brandenjones716 My empire of useless crap. 👍🏼😀

[@BadManN_TheBushes]

You kick ass forgive my language. I build chicken pens and frame windows😅 so you know I am a step below an amateur wood worker at best.

[@ODDBALLGALLERYKeithWilliams]

Thanks👍🏼 Whatever you do, just try to do it the best you can.

[@BadManN_TheBushes]

@@ODDBALLGALLERYKeithWilliams yes sir and to keep all of our fingers intact. I'm making progress. I have free wood so why not delve into this a bit

[@zacharybrosious2293]

To bad Grizzly doesn’t sell the resaw power feed anymore.

[@ODDBALLGALLERYKeithWilliams]

Ya, I guess there is just not much demand for them.

[@Wood_Slice]

Hwish i had ur space

[@ODDBALLGALLERYKeithWilliams]

A shop is never big enough.😀 My problem is what to do with the finished product until delivery. I often use an enclosed trailer for temporary storage.

[@hanroman1524]

like

[@ODDBALLGALLERYKeithWilliams]

I like that you like 👍🏼