great camera angles, really showed the processes in fine detail
@RuneCarverLLC10 ай бұрын
👍 I was just reading the email that XTool sent me for this promo, it's a fantastic looking setup and will probably do about anything I can imagine. Thank you for another excellent video and demo! 👍👍👍
@gustavoortizdiaz974310 ай бұрын
Wow, those are amazing! I ordered the laser a few days ago and just found your videos! Thank you for great tutorials and showing us the capabilities of the S1! I like how you structured your content direct and to the point. You now have another subscriber and thumbs up!
@woodworkingwithSkyler10 ай бұрын
You are so welcome! And thanks for the sub
@gurk2k10 ай бұрын
Very informative and interesting videos. I am looking all over youtube at Xtool S1 videos for handling and result and you are one of few that shows the whole process and how to do things when it is done. Love the staining of the last piece and that you show things in different light and angles and also materials. You are also low key funny. "Use a cheap brush for this" *brings out the expensive one*. Thanks for a good video.
@fylith63789 ай бұрын
Such a great tutorial and so detailed! Thanks so much
@chrisoliver38517 ай бұрын
Hey Skyler can you please do a video on laser engraving portraits with XTool S1
@The_real_chrisstahn10 ай бұрын
I bought an S1 🎉 I used your link too 😊
@woodworkingwithSkyler10 ай бұрын
Awesome! Thank you! let me know if you have any questions
@aislinciarcia284610 ай бұрын
i absolutely love all of your videos. Sooo informative. My only complaint is that it is often so hard to hear you because of your mic set up. But awesome video
@woodworkingwithSkyler10 ай бұрын
Thank you.Sorry about that, working on it
@teresa677510 ай бұрын
I heard her great. Actually had to turn my headset down a bit.
@bloopbleepnothinghere10 ай бұрын
How long does it take to engrave that 5x5 piece?
@mikefondren238510 ай бұрын
Skyler, great videos! I really like these images. Can you tell me where these images are available? Thanks, keep making great videos!
@woodworkingwithSkyler10 ай бұрын
I bought them on etsy. They are from seller GF5Bucks. Not affiliated with them, dont know them but they have good designs
@dougk545610 ай бұрын
Really nice boxes. The engraving really makes the boxes look expensive. Have you ever figured out how much it costs to make an engraving like the tulips? Just the operating cost.
@markesselstynmiller7477 ай бұрын
Enjoy the videos. Where do you get your photos or drawings that you engrave like the tulips for example?
@The_real_chrisstahn10 ай бұрын
Thanks for the great videos ❤️
@woodworkingwithSkyler10 ай бұрын
Thanks for watching!
@nicolasbarry45712 ай бұрын
great tetorial and enjoying all your content, ps looking for the girl in forest engraving if i may ask its a project id like to do
@giandeau8 ай бұрын
Great video. How did you decide what to change the settings to?
@weberboxes10 ай бұрын
May we know how long it took the machine to do the tulip engraving in the yellow heart. Maybe you mentioned it in the video, but I didn't hear. Thanks for the well done videos about your work. They are informative and entertaining.
@putogenio3769 ай бұрын
Great video..Is that a 3d image you are using? If so did you have to convert it?
@Black-Elmo.....10 ай бұрын
Good morning.. beautiful work as usual.. I was just wondering where you get your wood from? Also, do you know how long they'll be holding their early bird sale, as I won't have the money to purchase it for about 2 weeks? Thanks, Jim Brady..
@woodworkingwithSkyler10 ай бұрын
I buy my wood on Amazon or ocooch hardwoods . I believe the early bird special is only till 10/21. Then the 200$ off coupon for purchases over $2000 will work till 11/2
@bigdawg51355 ай бұрын
Skyler, where did you get these photos from to do this 3d ish style engraving?
@margohenderson28776 ай бұрын
This is just beautiful. Where do you find your patterns for the 3D engraving? Love how you showed the difference in woods and the contrast considerations. Going to watch you work. Subscribed!
@woodworkingwithSkyler6 ай бұрын
Thank you. I bought the design on Etsy
@LemonLimes9920 күн бұрын
@@woodworkingwithSkyler can you please link the shop?
@anthonyfox73808 ай бұрын
Hey I got the same machine but have been unable to get the darkness like on your nightmare before Christmas. Is there any suggestions? Settings? Xtool has been somewhat helpful until recently when they told me my old coaster with a much lower powered machine was spray painted on.
@mtz38437 ай бұрын
just wondering, will the wecreat do this also, the craving?
@woodworkingwithSkyler7 ай бұрын
Yes it does
@mtz38437 ай бұрын
@@woodworkingwithSkyler ty, im trying to decided which one to get, plus the price, im retired an limited on money. but want one so i can do alot more things for my church an my hand are getting old, scroll sawing taking longer.
@edlawrence39559 ай бұрын
Thank you for answering my question so quick, but I have another question..... I scroll saw and love to do inlay from time to time, but it's tedious to scroll. Enter your videos... since watching a couple of your videos where you do the laser inlay (why I now want a laser engraver).... I didn't catch how you determine how deep to make the cut in the main piece of wood so it accepts the inlayed cut piece. Is it just trial and lots of error or is there a more scientific way to know before hand....? Hope my question makes sense. Thanks again....... Ed
@woodworkingwithSkyler9 ай бұрын
Hi Ed. The pocket for the inlay is really just a deep engraving. Mostly try and error. The pocket have to be shallower that the inlay piece, I can easily sand the inlay piece flush to the surface
@rlfrieden7 ай бұрын
How thick is the wood you used for the tulip engraving?
@woodworkingwithSkyler7 ай бұрын
Half inch
@edlawrence39559 ай бұрын
Well put together and informative tutorials....! I have been looking into the purchase of a laser engraver and wondering if you have ever used other brands to compare against the xTool s1. How easy is it to use for a beginner with not a lot of computer skills....? Thx : )
@woodworkingwithSkyler9 ай бұрын
I used many laser engraving machines. I currently own 9 of them. Here is a video where I compared a few of different brands and machines. I have zero computer skills and I can tell you is really easy. It could be as easy as importing a design, scale to size and push the start button The Ultimate Diode Laser Comparison! Escape laser regrets . Discover the best diode laser in 2023 kzbin.info/www/bejne/gHzIaaRvnKpnj5I
@ilovemusic71948 ай бұрын
is there depth to that engraving? or is it a 3d image? it looks great! still deciding if i should get an f1 or s1
@woodworkingwithSkyler8 ай бұрын
There is a little depth but only about 1-2 mm
@GratefulOverlander5 ай бұрын
If you're going to show something close up, please don't stick it so damn close to the lens...and more importantly HOLD IT STILL so we can actually see it
@sbr-synrosimbugracing933810 ай бұрын
I ordered the 20 W S1 bundle. Will the 20W engrave like this? Maybe a bit slower or a few passes ? Great video
@woodworkingwithSkyler10 ай бұрын
Yes, it will engraved just as good. More power only makes a difference when cutting or doing inlays
@sbr-synrosimbugracing933810 ай бұрын
@@woodworkingwithSkyler Can the 20W still do inlays? Just much slower? Thank you for your reply. You have a great channel.
@woodworkingwithSkyler10 ай бұрын
@@sbr-synrosimbugracing9338yes but slower
@jeremydillon438510 ай бұрын
What’s the max thickness it can cut cedar?
@woodworkingwithSkyler10 ай бұрын
About a half an inch. I cut hard maple half inch but it took 3 passes
@jeremydillon438510 ай бұрын
@@woodworkingwithSkyler thank you so much! Love your videos by the way! Honestly surprised you only have 11k followers but I’m sure that will change very soon!