MGB Clutch Master and Slave Cylinders

  Рет қаралды 13,361

Steve Denton

Steve Denton

Күн бұрын

Пікірлер: 36
@johnsharonwhitaker9242
@johnsharonwhitaker9242 Жыл бұрын
thanks Steve. I watched and pulled all the clutch components out of our '67 MGBGT bought new in Saskatoon. Last driven in 1986 and sitting outside so you can imagine the condition. Got the engine running and have 120 compression but no brake or clutch action. Clutch master out and honed but can't get the piston to retract on the slave. Going to try a grease gun if I can get the right fitting. And haven't tackled the bleed screw. I can just feel it breaking off. May follow your lead and go for new everything. John in Manitoba, middle of Canada.
@SteveDentonClassics
@SteveDentonClassics Жыл бұрын
Great stuff, it's always good to have a project on the go, keeps the mind busy 👍
@riccardodellicolli2568
@riccardodellicolli2568 2 жыл бұрын
Great video, i can try to change my clutch alone too. Many thanks Riccardo from Italy
@SteveDentonClassics
@SteveDentonClassics 2 жыл бұрын
Glad my video helped you 👍
@T101cyberdynesystems
@T101cyberdynesystems 3 жыл бұрын
Liking all the new hard lines as well, at least you know the jobs done right 👍
@SteveDentonClassics
@SteveDentonClassics 3 жыл бұрын
That's what I was thinking, for the cost of how much they sell it, I then know the history of how old all the hydraulics on the clutch are 👍
@charliefm4581
@charliefm4581 3 жыл бұрын
Great video Steve.
@SteveDentonClassics
@SteveDentonClassics 3 жыл бұрын
Cheers Charlie, glade you liked it 👍
@steveclews6557
@steveclews6557 3 жыл бұрын
Steve r u sure the flexi pipe doesn't go in the hole the bleed nipple was in ??? I'm pretty sure I read that they ship the bleed nipples in the wrong hole because of packaging and fitting it in the box.the flex did look a tad tight
@SteveDentonClassics
@SteveDentonClassics 3 жыл бұрын
Someone else did comment with what you've said, and it's something I was unaware of. I just thought, well this is how it's came out the box, this is how it must be. Looking back now, doing it the way you say would make sense, as the bleed nipple would be higher on the slave cylinder. It goes to show, every day is a school day. I will correct this mistake soon 👍
@johndavey72
@johndavey72 3 жыл бұрын
Good Morning Steve. You do make this look deceptively easy ! And l'd bet you'd murder for a 2/4 post lift ! Although the neighbours probably wouldn't be so impressed ! I had to take my good lady to a specialist dental surgery in Ashburton , Devon . I had an hour to kill so went for a walk through the back streets of the town .I thought l was seeing things ! There was indeed someone with not one but two lifts on their property ! Have no idea what the neighbours thought ! You definitely don't want to lower your jack onto your Sebring valance! Hadn't noticed the vibrant yellow rocker cover before ! Cheers !
@SteveDentonClassics
@SteveDentonClassics 3 жыл бұрын
I'd love a hoist, but it's like anything. It's nice to own but storing it would be the issue. Who knows if my YouTubing really takes off and I get some good sponsorship then maybe I could rent a garage with a hoist 👍
@johnb1718
@johnb1718 11 ай бұрын
excellent clutch videos.
@SteveDentonClassics
@SteveDentonClassics 11 ай бұрын
Cheers John 👍
@georgemccormick8999
@georgemccormick8999 3 жыл бұрын
Nice job Steve, I just had the clutch master replaced on my 74 TR. Enjoyed seeing the process, maybe next time I might give it a go myself.
@SteveDentonClassics
@SteveDentonClassics 3 жыл бұрын
Cheers George, you got nothing to loose giving it a try 👍
@edenyanes7386
@edenyanes7386 2 жыл бұрын
@@SteveDentonClassics the hose on slave cylinder is in wrong place
@SteveDentonClassics
@SteveDentonClassics 2 жыл бұрын
I did a follow up video on this a while back, hears the link kzbin.info/www/bejne/qqnMl6yGe5t_sMk
@the_realJP_
@the_realJP_ Жыл бұрын
Exactly what to do, thanks!
@SteveDentonClassics
@SteveDentonClassics Жыл бұрын
You’re welcome 👍
@the_realJP_
@the_realJP_ Жыл бұрын
@@SteveDentonClassics Just realized I meant to say (what I need to do)
@mariano4003
@mariano4003 3 жыл бұрын
great work as allways!
@SteveDentonClassics
@SteveDentonClassics 3 жыл бұрын
Cheers Mariano 👍
@74superduty455
@74superduty455 9 ай бұрын
Good video, Thanks.
@SteveDentonClassics
@SteveDentonClassics 9 ай бұрын
You're welcome 👍
@jamesfromwellington
@jamesfromwellington 3 жыл бұрын
Nicely done. I've just got the transmission out of my Spitfire and the slave cylinder definitely needs attention. I'm going to try a rebuild kit I think
@SteveDentonClassics
@SteveDentonClassics 3 жыл бұрын
Cheers James, it's worth a shot, and doesn't cost much for a new seal kit 👍
@andymoorhouse8820
@andymoorhouse8820 12 күн бұрын
Well done long time ago but appreciate the job what was is Lh or Rh I need the same kit
@SteveDentonClassics
@SteveDentonClassics 5 күн бұрын
Do you mean is there a LH version and RH version? In which case I would have thought so 👍
@andymoorhouse8820
@andymoorhouse8820 5 күн бұрын
@@SteveDentonClassics it's ok I did not realise rh was right hand drive my brain wasn't thinking of that
@SteveDentonClassics
@SteveDentonClassics 5 күн бұрын
No probs 👍
@gregmooradian3711
@gregmooradian3711 3 жыл бұрын
Nice job and a lovely MG. I don’t know if you noticed but the bleed valve comes installed where the hose should go, that’s why there’s that nasty bend in it. I bled mine using an easy bleed so I didn’t have much trouble. It works that way I just prefer the hose coming out the front, but I love what you’ve done to your car, I have a 69 GT also. What’s your opinion on the upright oil filter? Does it take long to register oil pressure, especially in the morning?
@SteveDentonClassics
@SteveDentonClassics 3 жыл бұрын
I didn't know that, I've seem them fitted both ways , but just guessed, that how it came out the box so that's how it should go. However thinking about it what you say makes sense as the bleed nipple will then be higher than the flexi feed hose, making it easier to bleed. Does make you wonder why they are supplied with the bleed nipple in the wrong place. As for upright oil filters, I don't pay too much attention to what is said about them, some will say you're better with one that is underslung as they keep the oil in from start up, this is true. However after many years of working on modern Vauxhalls for a living, that have upright, or upside down oil filters and never having any issues with oil pressure, I'm come to the conclusion what is being said regarding classic cars is nonsense and just a sale pitch. It's like anything, if you didn't have an oil gauge in the car, you wouldn't look at it. And if you warm up a car for a few minutes before driving, then your taking care of your engine and all will be fine 👍
@brucewayne5488
@brucewayne5488 3 жыл бұрын
Can you link the set you purchased?
@SteveDentonClassics
@SteveDentonClassics 3 жыл бұрын
There you go: www.msc.parts/
버블티로 부자 구별하는법4
00:11
진영민yeongmin
Рет қаралды 28 МЛН
Mom had to stand up for the whole family!❤️😍😁
00:39
А что бы ты сделал? @LimbLossBoss
00:17
История одного вокалиста
Рет қаралды 12 МЛН
1972 MG Clutch Repair - Part 2 - Installing The Clutch & Assembling
38:17
Elin Yakov's Rusty Beauties
Рет қаралды 8 М.
MGB, MG B, 1963: CLUTCH AND BRAKE MASTER CYLINDER FIX PART 1
17:58
MGBs and Other Stuff
Рет қаралды 3,5 М.
My MGB Nearly Bankrupted Me - The TRUE Cost of Restoration!
15:44
176 MG Tech | Slave Cylinders on MGB
6:45
UniversityMotorsOnline
Рет қаралды 49 М.
Porsche 914: How To Diagnose An Overheating Engine | Wheeler Dealers
9:56
MGB Clutch Slave Cylinder Correcting My Mistake
4:50
Steve Denton
Рет қаралды 3 М.
How to Change MG Midget Clutch Slave Cylinder
14:18
Andy's MG Adventures
Рет қаралды 9 М.
Easy-peasy MG Midget hydraulic clutch bleeding
13:00
Red Scorpion 6
Рет қаралды 10 М.
MGB clutch slave cylinder and hose replacement
12:38
mgbgtguy
Рет қаралды 10 М.
Non running MGB puts up a real fight
26:08
mgbgtguy
Рет қаралды 10 М.
버블티로 부자 구별하는법4
00:11
진영민yeongmin
Рет қаралды 28 МЛН