Working on my 2017 tracker gear shirted

[@davidhopkins5940]

You helped me with that one!! Same thing happened with my boat. Thank you!!

[@CatfishBurchOutdoors133]

Your welcome glad I could help someone.

[@gregmenard4807]

MIne did the same freaking thing !! Had to do a bush fix with a zip tie to be able to back to the boat ramp. Those two screws backed out (2023 190TE ProSX115) and lodged down between the body and housing. Had to get rough with it to get home. Thank you for posting this, about to head outside and make this repair. This happened to me yesterday. My boat is basically new in age and this should not have happened.

[@toddd.2057]

Awesome thanks for posting and sharing, there is very little Tracker boat videos out there. I have to replace my Safety Neutral switch, and this should hopefully get me into it, verses taking the whole throttle assemble apart form the back side.

[@dougjackson4530]

Thanks for posting this Catfish! Have a 2017 with light use on it. Last time I took it out I was having problems shifting..... notices 2 screws were backing out and letting that plastic piece move forward. And Amen on the veterans👍

[@CatfishBurchOutdoors133]

Your welcome glad it helped you. I got some veterans booked fist weekend in June 🇺🇸

[@PureFitnessTV]

Thank you for this information. I really appreciate you saying thank you to us veterans! We pride ourselves in serving our country. Americans First! Have an awesome day and thanks again for these tips from the video.

[@Justin.Hawkins]

Dude thanks a ton. Been driving me nuts trying to figure out how to remove that arm. Need to replace the trim switch

[@blydakid]

Wish you would have shown actually removing the handle but very good info.

[@MrBAchompBAchomp]

Watching my Dad break that little black piece now. Lol

[@kenwyse5878]

Thanks. This is the exact info I was looking for. 😊

[@jessestrunk1541]

Helped me out thanks

[@mikefedor78]

Thank you so much for sharing this video 👍

[@richardleopard7678]

What was your problem? Was is hanging up? Mine started hanging when I give it gas. It just stops @ 2000 rpm. It’s not stiff just like it hangs up. Thanks

[@12vshady]

So you don’t actually remove it ?

[@pastyuscricketer]

Perfect

[@randyates436]

Thanks.

[@hstfk]

Thank you for the onfo

[@10warreng]

It’s easy to talk about what you did. Should have showed as you did it. Poor quality and not informative