Making Electric-hydraulic Tipper Trailer

[@jorgeconcheyro]

Love the "pallet width" feature, very clever. Fantastic construction, I hope it helps a lot!

[@WorkshopFromScratch]

Thank you 😁

[@Rooihuiskraal_]

Bro! I'm mesmerized

[@justicefall1917]

Another awesome build! I never get tired of watching your skills and workmanship! Thank you very much for sharing!!!

[@WorkshopFromScratch]

Thank you 😁

[@Wingnut_Stickman]

Couple ideas to improve -- Build a hanger on the front face to hold the tailgate when it is not installed. And Install chains on the tailgate so you can limit the opening and control the spreading of product, like a dump truck does, Excellent video! Thank you for sharing!

[@crazymtbrider]

I have to say I quite enjoyed the drive to dump the cuttings while mowing but this makes dumping the cuttings more enjoyable! Please make a shute from the mower to the trailer for grass cuttings

[@kameljoe21]

Super. I would change one thing and that is when the line comes in at the ram on the top. Put a hard line down to the pivot point this way the line only needs to move a small amount and the flex would be limited. Other than that a super build! Love it.

[@mcmuskie2563]

Throughly enjoyed watching you work. Great skills & equipment!

[@SimonCoates]

Excellent workmanship and a very good trailer. But a safety warning: this needs a swivel hitch to prevent the towing vehicle from turning over if the tipper trailer fell over sideways. It's an easy bolt-on upgrade. Also requires a fuse or circuit breaker on the battery connection.

[@johncuervo3019]

Sounds excessive. Just don't tow or dumb on uneven grouf

[@mikel9567]

Clearly you don't know what you are talking about. Even commercially built dump trailers don't have a swivel hitch. Why, because it's a weak point. That trailer isn't big enough and doesn't raise high enough to worry about tipping.

[@larryenglish9292]

lol I'd be shocked if this trailer was capable of turning over a 4 wheeler or golfcart. how big do you think this trailer is? lol

[@metalanddust]

My old man had a tractor tipper go over once at 30’ high. This is sound advice. Possibly not as much of a worry as his

[@arcraider937]

LOL the design exceeds it's intended use .

[@paulg1827]

I'm a cabinetmaker of 35 years, shop full of tools, but the wrong medium.......enjoyed watching!

[@johnrussell5180]

Exceptional fabrication. I see you have bunches of high-end tooling machinery, but you obviously also have the knowledge to operate them. Best work I have seen in a long time!

[@donaldmatthies6026]

That's a really nice handy little trailer. Thank you for taking time to film, build, edit and post this video.

[@WorkshopFromScratch]

Thank you 😁

[@donaldmatthies6026]

@@WorkshopFromScratch you are welcome

[@Rocket39Smoke14]

If my scrap pile was like yours I'd call it a gold mine.

[@donaldstrishock3923]

ALL That WORK,and NO SUSPENSION;= PRIMITIVE PERFECTION.

[@Gus1966-c9o]

Are you serious?

[@homecraftsolutions3506]

Seriously the best quality fabrication and video job on KZbin. Very well done. Didn't know so many words could be said in one video, Ha.

[@MechanicalWonders-b7x]

Just came across this video, and I have to say it's super informative! Thanks for breaking down the details so clearly. Definitely keeping this on my watchlist!

[@ElectricGears]

That is a very nice design. One thing I would suggest is to cover the pump and battery with a solar panel which will protect them from the weather and keep the battery topped up without having to think about it. You might also be able to find an old tool box to mount them in which could also be a place for the remote control. I'm thinking of those tool boxes which would be deep enough, but then have a removable tray to cover the battery/motor and it could hold other small stuff.

[@ur_quainmaster7901]

This is a good idea! Every spot on my property that gets a mower, tractor, atv, etc parked in has a solar powered battery tender connection. That and flat tires are such a pain in my ass that I mounted a 12v battery and air compressor to a dolly... Has jumper cables just in case after one of the battery tender wires oxidized and that battery was dead even after being on a damn charger. Also has a shelf for a little 79cc 2 stroke harbor freight 700w generator but I haven't needed that for anything yet. I have grid power available in most spots but why have the constant drain when solar is sufficient.

[@HappilyHomicidalHooligan]

In addition to the above modifications, I suggest adding a second set of tailgate connections to the front of the trailer so when you take the tailgate off the back, you can hang it on the front face of the trailer so you don't lose it, forget it and when you've offloaded whatever you took the gate off for, you can immediately put it back on the rear so you can then load more lose material (gravel, sand etc.) without having to go all they way back to wherever you left the gate...

[@peetky8645]

what type of hydraulic cylinder is that--double acting?

[@ElectricGears]

@@peetky8645 It has a port at both ends so it's double acting. In this application it doesn't need to be, since the weight of the dump box should be enough to overcome the friction of the seals and let it down. Although plumbing it as double acting is a good idea because it keeps moisture/contaminates out of the rod side of the cylinder.

[@peetky8645]

@@ElectricGears thanks for the information. I want to make a small crane for my flatbed and one of these could be useful to move the boom in and out.

[@jjock3239]

What a superb design, followed by excellent construction technique. I have a trailer, but if I needed to build one, this is what I would use as a model.

[@dwyanejetersr6470]

Your skill is extraordinary your gifting from the creator of all things, such a pleasure to watch you work, sometimes I watch you for 5 or 6 hours and I'm still amazed at your skill. Keep it up sir, we enjoy watching you work!!!!!!!!!!!!!!!

[@oby-1607]

Some outstanding metal work with some great tools to do so. Its always so much better to create something rather than to buy it.

[@albertsalas9154]

I'm like a kid again with some grown boy toys lol 😆 saving this vid. I'm gonna make one now.

[@moellc]

You're such an artist! Please keep making videos

[@WorkshopFromScratch]

Thank you 😁

[@rgthomson1]

I was rebulding a trailer last week and i sure wish i had access to the great workshop and tools you have there, you also have all the gear and great ideas, great workmanship

[@ggrepoman]

Great build and craftsmanship. Now I'm guessing the location of the ram is due to the length of its stroke and a possible need to tip it straight up, but if positioned so that the ram is closer to the front it would allow for heavier loads to be dumped, while simultaneously reducing the power needed to raise and lower the tipper save your battery and pump. But in the end it works and for diy that's all that matters. Thumbs up from me.

[@billybike57]

Awesome design & assembly 👍🏼

[@WorkshopFromScratch]

Thank you 😁

[@danatraver2134]

Your workmanship is excellent and insightful And your video editing is getting even better.

[@WorkshopFromScratch]

Thank you 😁

[@pyro323]

Nice build. I'd recommend a charge circuit for the battery otherwise it will just discharge as you use it. Maybe a solar charger or just recharge it after each use.

[@WorkshopFromScratch]

Thank you 😁 First I have to fix the charging in the mower troctor 😂

[@dav1dsm1th]

Great video. I hope the fittings on the hydraulic ram don't get knocked off - as they seem to be the lowest part of the lift mechanism - maybe some small skid plates to protect them would protect them. Stay safe out there.

[@WorkshopFromScratch]

Thank you 😁 There is more clearance between the mount and the ground than it looks in the video 😁

[@okielicious]

You sir are a master fabricator!!👍

[@danssv8]

Too nice , I think the kids will enjoy working while you watch them loading it with spades. I think you could have just lifted it off the hitch and tip it out lol , it's so small , sure the kiddies will enjoy their new toy. Very beautiful but you should make a bigger one for the big boys toys. Sure it's going to come in very handy in the paddock. I would really thinking of upgrading the axles though.

[@jss3018]

A master of fabrication. Beautiful. Thanks.

[@adamf893]

That is a wicked hitch design. I love the way it looks.

[@yeagerxp]

Excellent work, next project turn the lawn mower into a small front end loader🤣 👍👍👍 . Thank you for sharing. Take care of yourself, be safe 🇨🇦

[@WorkshopFromScratch]

Thank you 😁 But with this front loader you gave me a good idea - Thank you 😁

[@akitas8165]

Excellent workmanship and an excellent result. Well done.

[@WorkshopFromScratch]

Thank you 😁

[@jackjohansson10]

Your shop is so cool and never judge a book by its cover I guess

[@_Waldezas]

Love the simplicity you keep in your builds. Hinges need some second thought.

[@WorkshopFromScratch]

Thank you 😁

[@andyb7754]

Very nice trailer build, thank you.

[@WorkshopFromScratch]

Thank you 😁

[@pedrosmits]

Love that you made it the size of a pallet, nice job. 👍

[@greggmcclelland8430]

Great job. You have made such a beefy wagon. The only thing I would do differently is a better beefier tailgate latch system. The one you have does not match the rest of the wagon for strength. You have mad skills.

[@go4lowcost652]

Metal fabrication to the next level!!! Wow

[@v_garage_u_temi]

Приветствую ,спасибо за хорошую идею

[@cuorpoantonio8015]

Maestria unica amico. Da manuale, peccato che per me è irraggiungibile fare quello che hai fatto. Ma come lezione per apprendimento è veramente unica. Grazie

[@EmiAgriDiY]

Great Job 👍👍👍

[@TheFivepointbro]

Nice trailer, well done!

[@Lone-Wolf87]

That will come extremely handy in my garden. Well done. Very nice handy project. 👍👍👍👍👍

[@WorkshopFromScratch]

Thank you 😁

[@4tra]

i don't know why but i rather do it with external power source. make like trailer socket. because charging battery... im to lazy :D over all great job and amazing project... looking for your future builds

[@Rooihuiskraal_]

This guy is a professional Fitter and Turner

[@WorkshopFromScratch]

No, I'm a self-taught amateur 😁

[@tomjack9632]

Very nice job, enjoyed watching the build

[@Patriottoo2]

Well, that project didn't take very long to build, but I would have painted it green. 😀 Handy little trailer... well done! Appears you have a bit of "scratch" invested in the workshop tools.

[@WorkshopFromScratch]

Thank you 😁 Troktorek mower is red that's why I painted it a similar color 😁 I try to save and buy tools all the time they are not always good quality tools but the most important thing is that they do their job :)

[@Patriottoo2]

@@WorkshopFromScratch No need to justify the color you chose... I was just joking with you. I'm jealous of your tools. Cheers!

[@william38022]

Pretty cool 😎👍😊 I wish you were my neighbor👍

[@Lordlur]

I am impressed, want to come down to Poland and buy it :D

[@AaronEngineering]

That will come in very handy. Good job 👍

[@WorkshopFromScratch]

Thank you 😁

[@kentuckytrapper780]

Outstanding build, excellent job..

[@WorkshopFromScratch]

Thank you 😁

[@ВикторВдовухин]

Все красиво и замечательно! Но есть один недостаток! Ось прицепа нужно было сместить от середины прицепа хотя бы на 10-15 см!назад....А так при разгрузке он будет поднимать " тягач")....!

[@Skiridr22]

I’m impressed once again great work 👍🏾👍🏾

[@WorkshopFromScratch]

Thank you 😁

[@JuniorSantos-qx5bw]

Muito bom seus vídeos 👏👏👏👏 parabéns 🇧🇷🇧🇷

[@jimmoravec1326]

Excellent craftsmanship 👍

[@keegankramer916]

Very good work. That must have costed a lot metal prices are crazy

[@BuildALotAcres]

Looks great. Very nice job! 👍

[@WorkshopFromScratch]

Thank you 😁

[@mikeharris5166]

It's nice to have a 100,000.00 machine shop at your house.

[@lnesland]

Nice build. With all the great tools its no problem making good stuff :-)

[@RoMiguens]

That's very cool, one day you'll make a 4x4 small Traktor just for the farming tools ... very nice job 👏

[@WorkshopFromScratch]

Yes, a small tractor is in the plans but I don't know if I will be able to build a 4x4, but maybe 😁 Thank you 😁

[@RoMiguens]

@Workshop From Scratch - tray to use hidráulica traction 2 wheels permanently on traditional gearbox, and 2 wheels with hidráulic traction. More controllable very simple to use and fewer parts and has independent traction and steering on demand. just an idea never seen I think, extreme hybrid 4X4 ... good job my friend

[@3187rakkasan]

Wow man....the only thing you didn't do is pour your own steel and make those tires yourself (please post a link to the video where you built that riding mower from scratch! lol). SUPER COOL that you can do all that! That's skill for sure.

[@djevo3441]

Excellent job my friend congratulations 👏👏👏👏👏

[@WorkshopFromScratch]

Thank you 😁

[@mead6754]

I love watching your videos your a very talented man

[@WorkshopFromScratch]

Thank you 😁

[@charlesemmer8856]

You should install a tailgate release reachable from the drivers seat. Again, very nice construction as always.

[@WorkshopFromScratch]

Thank you 😁

[@MCsCreations]

Fantastic work, dude! 😃 The mechanism is brilliant! Well done!!! Stay safe there with your family! 🖖😊

[@WorkshopFromScratch]

Thank you 😁

[@richardstrombergoverkill5099]

You are an ARTIST!

[@ETV1970]

Great trailer, good job👍👍👍

[@cgrobe21]

Love the whole build. It's genius!. I would like to know more to where I can find that exact hydraulic pump and cylinder. I can't find it anywhere

[@kplandscapinglawncare563]

This was amazing to watch you build

[@piotrmatczak5694]

O widzę nowa przecinarka taśmowa 😀👍

[@WorkshopFromScratch]

Tak, zagościła też nowa, ale stare też używam :)

[@zacharywong483]

Spectacular job!

[@WorkshopFromScratch]

Thank you 😁

[@silvergrizzly316]

You just simply amaze me!😃👍👍

[@WorkshopFromScratch]

Thanks 😁

[@DreamerDrafter]

Spectacular ..mini truck i guess..⚘👍

[@RoboCNCnl]

super cool project !

[@WorkshopFromScratch]

Thank you 😁

[@davidw1324]

Good build. Thank You.

[@LeeRiddiough]

nice design , one thing id suggest is learning to weld ..

[@linctexpilot8337]

Always ALWAYS connect positive cable first - - then ground/earth cable last

[@45valk]

Nice workshop 👍

[@romihofi8848]

Jak zawsze super robota..👍👍👍

[@WorkshopFromScratch]

Dziękuje 😁

[@dzonyinglisz1611]

Piękna robota jak zawsze.

[@WorkshopFromScratch]

Dziękuje 😁

[@unkjason]

You sir are talented!

[@diyohan2226]

Super travail 👍 une belle application

[@WorkshopFromScratch]

Merci 😁

[@VertigoRC]

Nice work. Thanks for sharing. 👍👍👍

[@MultiBigDenis]

in the places where the tie rod was screwed, it was worth strengthening the holes and putting the bosses inside, in fact, almost the entire load falls on these two bolts, and over time they will bend the profile pipe ... it would also be nice to strengthen the welding points of the hydraulic cylinder mount and the hinged mount of the body ...

[@WorkshopFromScratch]

It is a trailer which, due to its dimensions, will not carry loads greater than 300,400 kg, so there is still an excess of material that I used

[@waynetubbs5914]

This video is the first video I've watched of yours I'll be the first one to tell you man you do good work!!!

[@WorkshopFromScratch]

Thank you 😁

[@guyina4x499]

Very nice dumper!

[@WorkshopFromScratch]

Thank you 😁

[@Stubones999]

you should add a section of chain on each side of the gate with a notch on the gate to allow you to limit the width of the opening so you can spread material rather than just dumping the entire load in one place.

[@tobiasandersen1168]

Thanks 😂 know i know what Im gonna build My dad want that actually thanks for the idea also 🙌❤️ big fan u have made me do so many stuff

[@WorkshopFromScratch]

Thank you, i glad find my videos useful 😁

[@SB-nt9fp]

Really nice build. You should sell the plans.

[@madeingarage7040]

Super estetycznie Ci to wyszło. Tak trzymaj!

[@WorkshopFromScratch]

Dziękuje 😁

[@buzzedalldrink9131]

the hydraulic cylinder is mounted exact opposite of any dump vehicle I have ever seen. The way this is currently constructed limits its strength and lifting capability.

[@arturlend2297]

Przydatny sprzęt w małym gospodarstwie, dobra robota 😎

[@WorkshopFromScratch]

Dziękuje 😁

[@michalrakowski3720]

Bardzo pomysłowe muszę powiedzieć że masz łeb na karku super łapka w górę 👍

[@WorkshopFromScratch]

Dziękuje 😁

[@Timothyarnold123]

Awesome job on that trailer cool 😎

[@IrfanAnsari-cl9jc]

Congratulations sir for new cutting machine 😍😍🔥🔥 love from India ❤️❤️

[@droberts73543]

Nice work!

[@Bullebock]

you should put a 7 pol outlet on the tractor and a cable on the trailer so the battery always charged by the tractor:)

[@tombarnes1871]

Excellent work!!

[@Vinhvlogs-1983]

great design great creator

[@WorkshopFromScratch]

Thank you 😁

[@francesco_maggio]

Amo il tuo canale. Fai delle cose surreali. Mi piacerebbe stringerti la mano 😍