World's Fastest 1WD Go Kart?! | Built 212 Swap, HUGE Burnouts!

[@prestonpfeifer28]

Very few things look as cool as that kart looks flying down the road. The body makes it look amazing when it’s flying

[@jonlawrence6338]

Reminds me of a rally car

[@gokarting1018]

Put wide slicks on it and put Goodyear on them like an actual nascar

[@CarsandCameras]

Trust me I really want to, but I don't want to hack this chassis. It's way too clean.

[@gokarting1018]

CarsandCameras lol as much as those are worth I don’t blame you put Goodyear on the tires that are on it to complete the theam

[@justwatch4757]

Just put the Goodyear label on the tires

[@milan5159]

It isn't a predator so they won't do it

[@thIDthIRreenactor]

@@CarsandCameras I got 1 slick for mine that is a factory slick but I dont have all 4

[@corndawg0024]

MAKE A TRAILER FOR THD LIFTED CART TO PULL THE NASCAR.

[@Sirpalmbranch]

Now that would be cool!

[@kgomotsoselwe4723]

Thats smart

[@tacworx2]

Cool!!!

[@ciarahymon8698]

Yeah that's what they should do

[@nathancano7790]

That would be sick !!

[@yrmoma]

The irony of a Nascart that turns right better than left...

[@Blurgamer17]

...That can actually turn Right*

[@justgrayyy105]

yrmoma Turn Right to go Left - Doc Hudson

[@chaseware3181]

@south And not true they do circuit tracks as well.

[@trillrifaxegrindor4411]

@Anthony Gwara nascar meathead,watch it.........figure it out

[@dinnercat1142]

@@chaseware3181 No, that is incorrect. Nascars have the steering biased to the left during races, but during circuit races, it's even.

[@Koshunae]

You guys need to get something like a motorcycle RAM bar mount for your phone when you do top speed runs, that way you can have full attention on the road and not worry about holding a phone.

[@GearHeadWW23]

Akron makes good mounts as well

[@mowler8042]

I made this same comment, someone in the states send them one please.

[@Kitao87]

I told them i would 3d print them something. Asked where i could send it, no response.

[@mowler8042]

Ram bar mount is not expensive and very durable it would be easy to send them one if someone lives close to them..

[@metalmyke1]

They used to duct tape or zip tie it.

[@BurntToast1703]

You guys should do a burnout kart build🏎💨 like the Australian burnout cars

[@Mainroad.Manjis101]

Jacob Lloyd and put the KRANKY (burnout out car) shell on it

[@bakedpotato8218]

Yes with ford falcon xp kinda look

[@MrBannnnnny]

Why be spinnin, when you could be winnin?

[@jeremyh8820]

This has got to be one of the most epic builds. What a beast. That level of frame sketch combined with the power is just crazy. You can tell it pulls like a bat out of hell in the higher rpms.

[@alexisthewanderer]

Heh why not put the 670cc on it and feel like a real NASCAR driver? I'm sure it's overkill but itd be entertaining

[@КостаСтојановић-о8х]

Entertaning purpuses only!

[@alexisthewanderer]

@@КостаСтојановић-о8х yes!! I didn't think of that till now lol, itd be fine.

[@AntonBabiy]

That engine wouldn't fit without cutting the body

[@alexisthewanderer]

@@AntonBabiy they wouldn't need to put the body on for the first run, if they like it, then yes they would have to modify the body but if they don't then hey no harm done.

[@AntonBabiy]

@CryinBranston I think one day they should make a burnout go kart with a big engine, front brakes and skinny rear tires 😉

[@drewtooker4243]

Perhaps maybe instead of modifying the original chassis you should find a different style go kart that you can modify to handle and stop well and also properly accommodate some serious horsepower. You should still keep the original chassis and perhaps rebuild the original engine so that you can just put the body on the chassis you feel like riding. Great video as always can’t wait to see the return of the rail.

[@Mixer_Driving_Nurse]

Drew Tooker I was thinking they should build a replica frame with a live axle. That would keep the original chassis untouched and one that the body could bolt to and still hold the extra power this engine has.

[@drewtooker4243]

Johnny Thompson that was my idea exactly. Have a performance chassis that the body drops right on to while leaving the original in tact for the collectors value.

[@gfrankum63]

They can always use the $50 go cart frame if they decide to take all the monster truck stuff off. Both frames look alike, and they kept the live axle on it for future projects.

[@erichoffman3205]

I personally think you guys should really do this one up with a live axle kit and give it the full racing kart treatment. hell, maybe buy another one and race them!

[@CarsandCameras]

We're on the lookout for another one in worse shape we don't feel bad about modifying!

[@erichoffman3205]

I feel like you guys can add to this one without really doing much!

[@GearheadENG]

Or talk to a fiberglass guy who can make a mold out of that body. Then you could have multiple body's made and race them. Keeping them slow would actually be pretty entertaining.

[@williamgottlieb8723]

Sure! Another one to race, but then another two more. One done up as a regular street car to speed away from one done as a police car to chase it with flashing lights and siren!

[@thIDthIRreenactor]

@@CarsandCameras hey how much is a naskart like yours worth without the fiberglass body like are they valuable

[@serious_laugherc1252]

How is there already 3 dislikes The video has’nt even been uploaded for 10 minutes I already liked

[@jamesvincent5142]

That was sweet. Issac coming around sideways down the drive way was so rad.

[@robertjames7869]

Another "we're having way too much fun " video! Man, I'd love to spend a day with you two!

[@onewheelpeelproductions470]

Well I gotta love the one wheel peel part. I remember wanting these promo go karts back in he 80s as a kid. It was almost an obsession after seeing one at the local store back in the day.

[@ianguttendorf9662]

That lift off over steer is no joke!

[@ttii4557]

Fwd penonmenon

[@ryanwilliams1651]

How cool is it to be a grown man and get to play like a tweenager!!!!???? Dudes, I am so jealous.. I must escape the real world day to day madness.. Thanks for another awesome video.. I'm living Vicariously!!

[@jerrekt]

The kart looks awesome with the body on! :)

[@Dan_Kornfeld]

How about a FWD project? Or better yet - FWS (four wheel steering)!

[@DieCastoms]

"Noma" garden tractors had 4-wheel steering. My father and I really wanted to get the transaxles out of two matching Noma's and build a 4-wheel-drive 4-wheel-steer "monster truck" of some sort, but never found a second tractor before junking the first..

[@jxke]

They already did the 4 engine cart.

[@nolansprojects2840]

Jacob Villines yea... boy was that an experience! Lol

[@justwatch4757]

I have never seen a front wheel drive go kart yet

[@jxke]

justwatch look back through their videos you’ll see the two front engine cart

[@Barnacules]

This is my sons favorite video 👍

[@youtubepoop1827]

Barnacules Nerdgasm shut up you old man

[@andrew_bro679]

@@youtubepoop1827 bro stfu. How old do you have to be to say shit like this, go play fortnite you little shit.

[@Everettmachin]

@@andrew_bro679 ada be man!

[@lolno3968]

@@youtubepoop1827 band kid

[@xavier-hm4gf]

@@youtubepoop1827 I bet your gay

[@jamesrose1974]

That's funny! The moment John accelerated, I heard a motorcycle get on it! It was like mini mayhem surround sound!

[@tbirdracefan]

Best news ever that the rail is coming back!

[@exquisitenonsense3987]

That looks so cool with the body on. I remember the Hardee's in Wilson back in the 80's had a Cale Yarborough Monte Carlo-bodied one in the lobby you could register to win. It was probably the same mold.

[@Chevelle_addict]

A friend of mine has the mold to build Corvette and 32 Ford bodies for karts.

[@GearHeadWW23]

I need one for mine lol

[@gixxerjesse]

How can we get a hold of your buddy?

[@benkunkle15]

May I have

[@Chevelle_addict]

@@gixxerjesse I can see if he's building any right now.

[@Chevelle_addict]

@@benkunkle15 he won't sale em.

[@ghomerhust]

gotta say, she looks GOOOOOOD kicking the butt out to the side on the open road there. really nice

[@matthewwolfe7962]

5:32-5:36 “Did you almost get you in the nu...”

[@brettcarlow5779]

thought i heard that lol

[@benkunkle15]

@@brettcarlow5779 same

[@ChristopherHayniedd980]

Now that’s a go kart one leggier burnout. So awesome. I can’t wait for your videos every week.👍🏻

[@CarsandCameras]

DON'T FORGET- Come to Busco Beach November 3-4! More info on our Facebook page!

[@sweeneysweeney1901]

Wouldn't miss it just ordered 2 tires for my 250

[@sweeneysweeney1901]

@@orestiskiriakidis6502 mines not a 2 stroke got a hammerhead gts250.

[@cavinmeade94]

CarsandCameras you should of cut a hole in the back for the exhaust hole it be so cool

[@Foshomoto]

Put a jack shaft on it and and another sprocket Tire hub

[@kerryhuston3669]

Dang far ike fits that one good. Sorry can't come to Bosco beach. Thanks for sharing.

[@TheJoeDavisx]

Love all the little tricks for extra leverage on your tools Ike! 👍

[@rickshown7770]

You guys that one wheel peel is awesome

[@alexsprings87]

Loved the video so much, liked and watched it twice in a row!

[@reginaldmiller8812]

I'm not even in that cart and it looks fast great job

[@ianjennings8372]

I could feel Ike’s joy as he lost control in that burnout. Keep up the good work.

[@pmaster587]

here before 1000 views!!! I LOVE YOU GUYS , Mondays are never dull with Cars & Cameras :D

[@SepticMonkey42]

this needs to be brought back, modern C&C NASKART would be epic

[@lucasberggren676]

Damn, one wheel peal to hell!!!

[@conradjake777]

Everything about this episode is just AWESOME!!! Great job guys!!! Love the vids guys!!!

[@Bublius]

Have you considered finding or building a new chassis you could put the naskart body that way you can modify and not feel bad about ruining the original chassis

[@deangelolawson6184]

Can't wait to get off work to watch this fully

[@RedWolfgarage24]

I want to see you guys build an intake manifold for the original engine and put a Honda or a four wheeler carburetor on it with the straight axle and see which is better also great video and can't wait to see hopefully what I just said

[@GearHeadWW23]

I just ordered a hat, shirt, and a sticker pack. thank you @CarsAndCameras for these awesome and fun videos!

[@Masuka-nya]

awesome! now make a mower with real sized tractor wheels xD

[@MilliganMotorsports20]

Loved the one wheel peel from that old go karts, awesome project!

[@nickthecarguy-channel]

That thing looks like a hoot!

[@Lee01Mr]

Nice start of the week yeah!!

[@keithfrisell4271]

I had a one wheel peel with a Briggs 5hp no governor in 1981 and it would lay rubber forever and I thought that was fast then a new kid at school said wanna race absolutely, when I show up he pulls out a marga racing kart with 100cc Yamaha on it and huge Goodyears ,after I got my doors blown off I junked the kart and put that motor on a mini bike but that is another story. Keith

[@MrTheHillfolk]

keith frisell Lol we hung out at a buddies one weekend and killed the tire between a Saturday and Sunday afternoon, good times.

[@Masterfab93]

This brings back memories in my first go kart with the built Briggs & Stratton methanol motor on it. way too much engine for a single wheel drive go kart but a lot of fun.

[@Cservoss25]

I had the same frame with a mtn Dew body back when I was young. What does the tag say on the back of the seat just curious?

[@kage.2wild443]

Y’all have some really clean cars just popping up in the back ground of this video!

[@MG-up5mh]

43.7 Boom, but I know it had more, uh huh..... 12:45 Ike’s homer scream.

[@jessebellis478]

DO IT FOR DALE !!! GO BIG !! OR GO HOME !! LOVEs This One !! Nice find guys !! You guys are AWESOME !!

[@81DEK]

To all you haters out there if you don’t like the way they do things quit watching. Nobody would miss you. Thank you and have a nice day.

[@Andrewlang90]

This cart is so cool. I was thinking this would be super cool to turn this into a burnout cart!!!

[@danielcastelow7523]

Put better tires it would do A little better love the kart tho😎🖒🖒🖒🤘🤘

[@monahumada7535]

Another good Monday at work!!

[@blorpcartons181]

Wow I’m here early

[@jasonkocinski2387]

U guys are Nuts. The frames for those Fun carts isn't much thicker than a piece of conduit. But it was AWESOME to see that thing going at top speed and dance.

[@reygar]

Nice!!! OK, you guys need to set up a race with Build Break Repeat's one wheel peel machine: "Go Kart Turbo Install! | Turbo Drift Kart Build" before they go to a live axle set up, and before they perfect the turbo install on theirs. Their first attempt at turbo-ing is not looking good, but the kart is very similar to yours in performance. It would make for a great race. What do you say, can we make this happen???!! I'm sure we would all love to see it and it would get mad views. Don't make us beg!! lol!! Hell, you could both race single wheel, do the live axle conversion and race again to make it a full event!! Reference Video: kzbin.info/www/bejne/l3acapJpo8mlppY

[@modelnutty6503]

I've said it a few times, instead of all the complex plumbing for a turbocharger, why not use an electric model jet ducted fan to pressurize the intake? its speed controller could be set up to work with the throttle (hall sensor), even program its response. it'd only need a little 3S or 4S LiPo to run it, a switch for when wanted or not.

[@wymansst]

That’s a clever idea model nutty. 👍🏻

[@csvex313]

Love that part at 12:54 when he drifts it!!!!

[@seanforehand755]

Boogity boogity boogity

[@jok3yjesu339]

The 20hp 212 needs to stay on that thing, it looks sick

[@cbudginas]

Don't whine about a trench cause you lost. Sportsmanship

[@matthewmann8951]

Nice 100 footer, 1 wh. You guys are killing me over here already. God bless peace my brothers

[@apollosport2895]

I bet this wont get pinned but can I bring my horse to busco beach?

[@matteedstrom]

Don't play with the food!!!

[@izzyplusplusplus1004]

It's a free country?

[@edwardthayer8965]

thanks for all the videos showing all the projects your working on. Some of the stuff you guys are doing gives me ideas on future projects that I want to do. Thanks guys.

[@dangallfastgarage5902]

Probably about as scary as an '83 Nascar car. That looked so awesome and sketchy, I loved it!

[@mitchm2999]

I have been watching u guys since ur first upload and in my opinion what i think would make ur channel more amazing then it already is is to actually spend a lot of time on one project and make a bunch a videos and make it like an amazing kart or whatever it is, and not just a week or two on one and make decent. Like this if u agree. No hard feelings, i love u guys

[@621ELECTRONICS]

Always liked the go karts with the body's. My uncle gave me his old Rupp Vega body 20+ years ago, still hope to build a frame / kart for it eventually.

[@grantcanman9873]

Dude imagine hangin out with these guys they have so many toys to ride would be fun as fuc

[@EdwardMurray06]

You guys gotta put a live axle on that frame. Something like that shouldn't hurt the value if done well and neat. Some sweet aluminum rims and new tires would also round it out nicely.

[@shipwrecked2006]

Darrell would be proud,love to see a live axle and a run on a asphalt track

[@andrewskinner5860]

awesome. it's great how you can keep it flat out and use that one wheel drive as a clutch transfer the weight. nice carb conversion.

[@masterchiefgaming8815]

Seeing that mini NASCAR just booking it made my day

[@austinlong9211]

I loved how hype Ike got over the fact it was tucking tire 😂😂

[@brandondeel3567]

That thing looks really fun!!

[@sadow51]

I had the same Go-kart when I was a kid! It’s was awesome. Still have the pieces

[@timthompson4905]

This is my favorite C&C kart to date.

[@oliververnon6966]

Man it's amazing how much cooler a nice body makes a go cart!

[@kevin86670]

I had a gocart back in the day that sat low and had the one drive tire. We put a 8hp Briggs 319cc on it. That dude was bad!! I can feel the excitement with y’all. Hahaha

[@Roboticdoughbull3k]

The ballet of Rickey Bobby LMAO! Aka Ike 😊 like Wil Farrow and Hank Hill all rolled into one. Everyone loves ya guys. All in good fun. Keep up the great videos and work guys!

[@theone2be33]

Well what you really needed to was link tow bar up to side bar to give you better calibrated traction. But since you dont have single position to front and rear alignment might be difficult. You could always mount one from underneath to help stabilize everything.

[@itsme-ow1nn]

You guys are crazy. Luv from England (the U.K)

[@brayanflores2972]

It’s been a while and damn it looks great and im glad I’m back !!

[@BIGWojo68]

😂😂😂😂 I love how Ike is just sitting in the background at 2:26.

[@g-man8008]

If you don't want to make any modifications to the current frame that you have, then build another one that the body will go on. That way you can make all the modifications you want to the other frame and use the body on that also.

[@notdatboileroy9602]

Listening to them scream in terror/joy is great!! 😂😂

[@aaronshensky9385]

Man looks like a freaking blast! Good job guys.

[@Dwayne7834]

Great video. Bad ass speed.

[@addicted2fuel245]

Live axle is needed for sure. This thing is sweeeetttt

[@Orbacron]

if that doesn't sound like NASCAR now, whatever.. authentic pro grade guys, love the video 👍

[@michaelkelly5388]

that gokart sounds cool !

[@brandonsmith2694]

that's was awesome guys so much tq

[@vt2704]

I ride motorcycles but I love this channel.

[@agoodballet]

This one is making me want to build a lil go cart low rider.

[@ELxTALIBAN]

That Nascar Monte Carlo ss 😎😎🍻🍺🍻

[@oli12shackel9]

That engine is insane!

[@jstephenallington8431]

Yessss! Bring back the rail cart! WooHoo!

[@DieselsandOutdoors]

I had a lot of fun on a one wheel drive gokart and a 3hp when I was a kid

[@hillonwheels8838]

Make some brackets that will bolt onto the stock rear axle that will allow you to attach a live axle so it will no longer be a 1 wheel peel and not modify the originality of the cart. Very awesome cart. My idea would be a piece of plate with a hole for the axle and a piece of L to sit up against the bottom of the frame. The only problem would be the rear axle would have to be wider then the body or maybe a deep dish wheel that would go over the stock axle. If not this is still a cool cart.

[@moto9968]

Dude you guys are freakin awesome

[@1badk20]

That engine build is identical to my Predator 212 build, except I am using the .292 Drag Racing Cam and 1.3 Roller Rocker Arms with GoPowerSports Ported Head with Larger Valves. I have this in my Mini Drag Bike. Man that thing is fun. I currently have it set up for VP110 because the engine has 12.5:1 Compression, I was told it makes 22-25 Hp. I have had it to 10,000 rpm and use an Mini Digital Tachometer to make sure I do not blow the engine, because it will Rev to the moon.