Building Aidens Truck w/ Scrap Yard Parts

We get Aidens truck bed back from R&R Accessories Rhino lining of Springville and begin putting back on the truck. We need a few parts we weren't able to find, so we take a trip back to the scrap yard!
Help support the channel buy Robby Layton T-Shirts, Hats, Patches, Stickers:
www.robbylayton.com
Subscribe: / robbylayton
No One Expected This With Ed's LJ20 Golden Nugget:
• No One Expected This W...
We Finished Ed’s LJ20 Golden Nugget!
• We Finished Ed’s LJ20 ...
Goodbye Golden Nugget... Hello '69 Dodge Charger!
• Goodbye Golden Nugget....
I Found A 100 Year Old Abandoned Tow Truck!
• I Found A 100 Year Old...
Joy Ride In Dad's Car Leaves Teen Buried To The Frame!
• Joy Ride In Dad's Car ...
Epic Barn Find Of A Lifetime, Waking Up An American Classic!
• Epic Barn Find Of A Li...
Abandoned '69 Charger... Will It Drive 1,115 Miles?
• Abandoned '69 Charger....
IT's ALIVE! The Abandon 69' Charger Runs Again
• IT's ALIVE! The Abando...
We Cut The Roof Off Matt’s Off Road Recovery Jeep
• THE BANANA GETS PEELED...
1 Frozen Skid Loader & 2 Trucks With Matt's Off Road Recovery + Trail Mater
• WE ALMOST GAVE UP! 1 F...
Shop Tour Video:
• Shop Tour & Meet The C...
Please like, subscribe, and share!
Thanks for watching, Daddy loves you.
#RobbyLayton #AutoBody #Repair

[@dzevadsuljkanovic4118]

Skeeter we miss you!

[@AFloridaSon]

Good to see Skeeter. The truck is looking good. Loving that rhino lining.

[@David-ql1hd]

Curious if this is where he's landing...

[@jimmyjenkins9240]

I know we have no idea of the work involved to make an entertaining and informative video, much less how to reconstruct a truck. What I do know is that you guys make it crazy fun! It was great to see Skeeter!

[@berlynreed4253]

I think Aidens whole family will be totally amazed when he gets the truck! You guys are a blessing to take on such a project!

[@tedrufledtjr.3573]

Is Skeeter joining the Layton team? Good to see him there. Truck is looking good!

[@RobbyLayton]

No he lives in the same town as me and is headed to Texas for the oil rigs

[@BigBlueMotors]

@@RobbyLayton Thanks for letting us know about Skeeter. Missed him on Matt's channel. Truck looking good 👍

[@seashackf1]

@@RobbyLaytonthanks for the info. oil rigs!?! If that’s all it is why was MORR so secretive about it?? First, they tried to ignore his absence. Then, when they had to address it, said can’t say why or where he went. Whole thing has been weird.

[@steven.h0629]

@@RagnarKon zactly what Matt said.. ".. to respect their individual privacy..." 👍😎✊

[@MrTruehoustonian]

@@RobbyLayton if Skeeter ever in Houston he's got a place to crash right near the water

[@donaldmarty8445]

Aiden's truck is looking awesome! Can't wait to see it finished and the look on Aiden's face when he sees it. Nice to see Skeeter on your channel. Hope to see more of him!

[@stevescott6503]

The generosity of all of the people giving their time ,experience and products to this project is phenomenal. I started watching with the Golden Nugget project, and have been a huge fan since. Much appreciation to Robbie and his crew and every one else who was and is involved in these projects. I have learned of many products and procedures that I never had a clue about. Thank you to all.

[@stephenjohnson5985]

Good to see Skeeters still alive, maybe Trevor could pop up in the future. 👍

[@waynehanna5257]

THAT WOULD BE COOL

[@ggalland1]

Rhino liner looks fantastic! Nice to see Skeeter on. Truck looks amazing!!

[@jaywebb3105]

That's really bites for the family who had two wrecks in one day. Glad they were ok.

[@LostIn207]

The stance on Aiden's truck is perfect. Just tall enough, wheels tucked nicely. Good work gang

[@990drifter]

Aiden is going to be in awe at what you and the team have done for him. Great job guys and girls, stay safe.

[@rabbit6872]

I love how excited Hillbilly is about a top for a different model Bronco, lol

[@drobousmc]

Hey! It was good to see Skeet Skeet! By the way, Aiden’s truck is looking great!

[@ScottsGEN-XAdventures]

Another great video. Skeeter, I hope you are doing well. It’s great to see you and I hope you land on another KZbin channel or start your own. 👍🏻

[@pestcontrolguys]

Skeeeeeter! We like seeing him with your group! Hopefully we see more of that! Keep at it guys!

[@dragnfli520]

Aiden's truck paint is b-eautiful! And, the Rhino Lining is super nice! The junkyard as adventures are fun AND love seeing SKEETER again!! ... He should join the RL Nation! 💙

[@ronnydowdy7432]

This has been a long time for the truck and knowing how hard it is to get parts I understand. You have a great crew that has put a lot of hours in to get it where it is now. Thanks for your hard work and time for Aidan and his family.

[@davidmahan4160]

Great video, good to see Skeeter. Great team work guys, Aiders truck is looking fantastic, you'll soon have it all done.

[@jfloydsea]

Truck is looking great! Good to see Skeeter around!

[@TxRiderDave]

Looking great. Dinner is in his element when working on the truck. I can tell he knows those things like the back of his hand.

[@aliceevans3357]

Aiden's truck is really looking great. It will be a new truck when you're finished. Great to see Skeeter, hope he's doing well, he's a great guy. Appreciate everyone's hard work. Stay safe and GOD bless

[@alaub1990]

That rhino line going on was so satisfying..

[@1950harleycharley]

Skeeter is an icon in junkyard wreckers.

[@MarineAlpha]

Dinner you are the man. Love seeing you on this. Keep being yourself. IT'S DINNER TIME!!!!!

[@doublel7337]

You guys are doing a great job on this truck. It is going to be a hard time this Christmas for Aden's family, I just hope the truck will help them get through the holidays. I am sure he is going to appreciate all you have done.

[@MarineAlpha]

OMG! That Rhino lining is super awesome. They did a fantastic job. I absolutely love that white or clear stuff they sprayed on the lining!

[@Superhunan]

That is just light reflection off the texture. It is a hard coat and all black but looks salt and pepper with the right angle.

[@stusue9733]

@@Superhunan You're right of course but it still looks killer in the video.

[@Superhunan]

No doubt. The whole project is amazing. I have the same coat in my bed and the shine has dulled over time but years in it’s still holding up well.

[@RobbyLayton]

Rhino lining in spring ville Utah does a fantastic job!!!! We have used them for about 8 years now and never had a issue!

[@Superhunan]

Robby, it’s a shame you are so far away, I would love to have you do the color match repaint of my Tundra. I’ve seen the care and time you put in and the results are always top tier. Always enjoy your videos.

[@dgmills5351]

Robbie, You and Your Crew are amazing and full of Caring! 👍😎😇🤗👏🙏🏻❣️

[@Patrick.Weightman]

I love Lincoln he's so precious 😭

[@jcnpresser]

Thank you Demry for cleaning up the washer bottle, my ocd is killing me watching all these dirty parts going back on.

[@suzannebert3652]

The Rhino Liner looks amazing

[@trinidadian_jedi]

Man I hope this kid takes care and cherishes this truck.

[@thereplacementfordisplacement]

The best bedliner is a free bedliner.

[@rayfuller2657]

Good to see Skeeter and thanks for update. If Trevor shows up by any chance can you let us know what he is up to (Trevor and Tucker together made for such a good team).

[@307life9]

About 20 years ago I lived in Utah. I totally forgot you guy's called them jockey boxes. Too Cool! This truck is looking great. You guy's rock.

[@ronbrown3552]

Terrific Rhino Liner job from R&R!! Great to have you guys help out Aiden on the redo of his late dad's truck! Bravo!!

[@jesseleesamples]

Glad to see Skeeter, really liked him in MORR videos, his enthusiasm and never complain attitude about doing a job is so awesome

[@kevinjohnson7330]

Really cool build. My son and I finished rebuilding a 1989 short bed Chevy last year for his first vehicle. So much of what you’re doing brings back memories and maybe a couple nightmares. Our body and paint work isn’t Robby’s quality, but these trucks are really pretty easy to work on.

[@MadWiking]

Oh man!! Good to see Skeeter on the channel!! Please, Please, Please hire him!!! Best regards from Skeeters 15'th cousin from Norway!!

[@stephbm6]

Holy shit!! Someone else called it a "jocky box". I learned that from my dad and when I call it that no one else knows what it is! I'm glad Robby and I know what a "jocky box" is!

[@RobbyLayton]

That’s all I’ve known it as haha

[@DesertPartisan]

Luck? You do not need luck when when you guys are heavy loaded with skill and loving purpose. Real life super heroes.

[@maxironpaw]

That junkyard is amazing. I could spend a week in a place like that.

[@dodgeguyz]

On the headlights. You shouldn’t use LED in reflector housings, all it does is scatter the light and you blind oncoming drivers. I would’ve put in projector style housings. Otherwise, another great video!

[@rythemzlatin]

Yeah: DEFINITELY Triple-check the pattern by 🚶‍♂️🚶‍♀️🚶 taking a hike across the parking lot+ , at least 100' & 300' away to see if they are blinding. Many knock-offs ADD more LEDs for "Bragging rights" , but they end up being a LARGER AREA than the OEM filament , & out of focus of the reflector , scattering blinding light willy nilly. And sadly , virtually EVERY marketing dept. _DOESN'T_ know how sell technical products , so it's hard to know WHAT you're going to get 😕 . I started scouring YT channels last year , but never finished or upgraded yet. A bunch of the review channels are a joke , but there ACTUALLY ARE a FEW GOOD ones that do XLNT before/after , side-by-side , "oncoming" , etc. segments. Personally , I figure i'll end up with a half-dozen sets before i'm satisfied , repurposing the no-go's as Work Lights on the truck , & probably fabricating some vertical louvres on the brushbar ( keeping the beam straight ahead & to the Right , and semi-shielding the oncoming drivers , even if i'm satisfied with a "good" pattern , top 2/3 Louvred , bottom 1/3 unobstructed -ish ) . The more expensive alternative is to buy a WHOLE ENGINEERED ASSEMBLY , but 💰 Y💸I💸K💸E💸S 💰 !🤯! ) maybe for my camper van , but the truck gets the cheaper solution !

[@chlove2drive686]

Great channel Robby and the gang! I watch regularly. I’ve been combing the comments to see if there was info on those LED lights. I really want to find a good quality LED conversion for my 2013 challenger. I’ve been through three sets and within a year, all of them ended up strobing, or giving out completely. Any suggestions? TIA.

[@jeffwomack5821]

3 cars and 3 deer! Makes me think Hillbilly should have been hunting with headlights and not a rifle.

[@Kickinpony66]

Good to see Skeeter!

[@Patrick.Weightman]

That rhino lining looks outstanding

[@josephlipetzky2825]

Robbie, what your shop is doing is outstanding, you'll be remembered for this, keep up the outstanding work, 👍🇺🇲

[@Forbye4]

Good to see my old buddy Matt working his magic on the bed liner. Truck is going to look great!

[@builtbybo22]

GUYS!!!! Aiden's truck is really looking AMAZING!! Once again.....GREAT JOB!! #BuiltByBo

[@MattsContraptions]

You have to be the channel with the most likeable secondary character! Dinner, Cody and Hillbilly are amazing!

[@waynehanna5257]

PLS GET SKEET SKEET ON THE TEAM

[@marywin101]

Skeeter !!! Good to see ya buddy !

[@randyanderson8847]

He's just absolutely going to love his truck

[@georgeswartz5784]

I can't wait to see Aidens truck is done he's going to love it thanks for sending them videos keep sending them videos thanks

[@michaeldunn150]

I love that look of the rhino lining..... AWESOME!!

[@gerryhartung736]

Meaner than a junkyard dog comes to mind.

[@charlesistheman]

"The new and improved PowerProbe wire stripper and torch combo tool" Good job Dinner

[@nicktorea4017]

yes skeeter yes brother good to see you again

[@morgansword]

I am very impressed with your crew Robbie Layton. Not many small businesses can say they have a crew that will do anything for their bosses success and so your success is because each and every person is doing their best. And because they all try their best, it guarantees their own success as well. Try to repeat that without spilling any M&M's out of their mouth/LOL.

[@jtdehaanjr]

Yay! Skeeter! Miss seeing you! Robby, love that you and your team are so family oriented! Also, the truck is looking awesome! Rhino lining looks mint!

[@ktucky50]

Love what your doing for Aiden. Also good to see Skeeter

[@SchysCraftCo.]

It's coming along nicely guys. Keep up the great craftsmanship and hard work my friends. Fab On. Weld On. Keep making. God bless.

[@xvsj5833]

Love your positive Energy & Vibe Robbie, HillBilly, Matt, Dinner and the BOSS 😊💙✌️

[@brucebissell7626]

YOU GUYS ARE ALL AWESOME! ROB, YOU HAVE A GREAT TEAM WORKING FOR YOU, GOD BLESS, MUCH LOVE TO ALL. MARRY HO HO AND HAPPY HAPPY. 😇

[@gordgrant9893]

I absolutely love your guys work ethic. kudos!

[@distinguisheddjentleman8081]

I know some people are impatient and want your projects done faster. Trust me it’s far more interesting to see the effort and detail you put into it over the course of months. Seeing a truck get built in a matter of minutes on tv is nowhere near as interesting. Just wanted to say keep doing what your doing! It’s awesome!

[@jmfs3497]

Ugh! I've totally returned a part saying it was broken before. They accepted it and exchanged it for a new one. I got it home and thought "Dang! This one is broken, too!", but realized that is when I need to take a closer look at my own Operator Error. Sure enough I overlooked some convenient design features.

[@tomschmidt381]

I think we have all done that. Like most mistakes once you realize what you did it becomes obvious a duh moment.

[@laloramirez5665]

ill say what everyone is thinking!!! skeeter found a new job!!! @ Robby Layton 😂

[@RobbyLayton]

Fun fact me and skeeter live in the same town and grew up together! He just stopped by for the day before heading out to Texas to work on an oil rig!!

[@laloramirez5665]

@@RobbyLayton yea i seen another comment you responded on just messing around lol would be cool though just saying 🤔🤣

[@ydnartitcomb1]

If it wasn't for the Boss, you guys would still be at the junk yard.

[@williamwood4779]

A lot to unpack here, Skeeter visit and big dinner with a torch!

[@reddog543211]

Excellent video guys....so informative on how a truck goes together....you've come a long way in a short period of time!!..... the shots and editing are outstanding!!..... the "Boss" needs a raise for all she does !!!... the whole crew is a well oiled machine !!

[@MrDuck39367]

Good Morning from Whistler,MS

[@ramirohernandez2052]

Robbie, the first time I saw you were accessing the nuggets damage. Gave Michell from Fab Rats your opinion on how bad it was rusted over. Over a year ago, and now you have transformed into an knowledgeable entertainer along with your crew obviously the Boss has also been a pilot of this channel. You guys are amazingly entertaining on all aspects of your days work. Nice job keep it up. Thanks

[@danielsmith9500]

It’s looking so good. Wow. U guys (and gals) are killing it!!

[@TJfromAZ]

Skeeter!!! Great to see him!

[@stephenpoe2037]

Wonderful progress on the Truck ! Thanks for sharing !

[@jeremynelson8496]

I really like what you guys are doing showing people you can take old parts and make them great again. And the great generosity rebuilding this truck from the ground up. It looks awesome btw.

[@jdbrown3695]

It's lookin' great, guys & gal! Really appreciate the video of the process.

[@arorton]

Literally did the battery/power seat trick in the junkyard yesterday. Best part is there are plenty of jumper wires to choose from too! Great work as always!

[@bobmcdoggish9659]

You're doing a great job on Aiden's truck. I had a '97 Chevy Silverado that I bought new and, watching these videos, I miss it more and more.

[@nordys081]

You got to break a few hearts to fall in love..that's how your learn😂😂😂😂😂😂 your face right there killed me.....hilarious😅😅

[@Jordan-ws6jy]

It's coming along great and so close to being finished! Well done on the work so far 👏

[@robertbutler5087]

Lovin what your doing for this family Robbie and the team, you guys ROCK

[@rickchapman3051]

I love that you promote the business and products that help you. Sadly they are to far from Hawaii to use. But hey if you ever have a recovery on the big island we have a guest room..

[@thomasnichols3950]

Looking sweet!

[@dalejohnson1555]

It's beginning to look a lot like a truck. Thanks for sharing.

[@martinw28703]

You guys are awesome!! ❤

[@1953travis]

Thank's Robby, always the best..

[@jackrichards1863]

Now that was so vastly improved over the junkyard fun video , it's just night and day. The little truck is fabulous and a better rebirth than it had been originally. With maybe, the exception of thread locker and sealant? I really can't see that clearly. Dinner there, teaching me about wiring. I should have figured that one out years ago.

[@TowMan127]

You guys are killing it!!! 💪💪💪💪

[@chrisforker7487]

The whole project is amazing!

[@jimford3449]

I always find Cody’s bits informative and I think he is a good presenter. #teamcody!

[@jerrellesplain6010]

Dinner is just too AWESOME!!! that truck is beginning to look super niiice

[@marksloat1608]

You guys and trail mater are the best channels. Regular folks doing stuff and having fun doing it!

[@diyfferent]

Good to see this truck is almost done and it's looking great!

[@saintracheljarodm.holy-kay2560]

Getting there, keep up the good work and take care and have a blessed week amen.

[@TheOldaz1]

Looking good guys.

[@LAP1050]

Truck is looking great. Lots of hard work and good will has gone into this build👍🇺🇸

[@davebenson1504]

Great to see the companies chipping in... and again... I love to hear just HOW MANY donor vehicles were involved... 3-4 more today??? sounds like 'deer hits' might be scoring higher than hunters 😂

[@geraldburmeister9637]

I can't remember what year Aidens truck is but like between 98 or 99 they upgraded the fuel injection from sequential port to multi port injection and it gives that 4.3 a considerable hp gain and made it more fuel effiecient. Best part is it's a plug and play conversion and only takes a few hours at most to install. I did it to my brothers 96 and he was very happy with it. I think I got the fuel injection spider from amazon for like about $200.

[@michaelshansen7070]

You guys have no idea how much your videos make my day! I am a retired police officer and play with some body work for fun. Learn sooooo much from you Robby! Love the team too!!!

[@RobbyLayton]

Thank you for watching