Worlds' most compact 8 Keg Kegerator - ITS HERE! No need to build a keezer get this Keg Fridge!

[@ryanc3001]

Definitely needs more ports for 8 kegs. But so awesome

[@KegLand]

Yes we are looking into this request now. We might have more available in the future models.

[@jgm3796]

Have more ports been added in the latest versions? Three would be great. CO2, N2, and H20.

[@stanleygriffin3809]

You guys are geniuses! I love this idea.

[@KegLand]

Thanks Stanley. We appreciate it!

[@luishenriquepuhl7351]

KegLand is THE COOL BEER GADGET COMPANY. Hope to see your work far into the future. From the FermZilla to the amazing use of soda bottle thread pattern, this is amazing.

[@KegLand]

Thanks for that Luis. We really appreciate it. We have quite an active R&D team and the majority of our profits end up going into R&D. Thanks for your support!

[@MrBellda]

100%, you need 3 or 4 ports at the rear of this unit... 🙂

[@joe.skiles]

Amazing! Can't wait for this to be available in the states.

[@KegLand]

Absolutely. Wont be too long at all. Probably 2 months until they are released in America.

[@randydensmorejr3431]

This available in the states yet? And if so where to purchase?

[@joe.skiles]

@@randydensmorejr3431 I have not seen it anywhere yet. Keep an eye on Williams Brewing for kegland branded stuff, and Morebeer for rebranded komos.

[@leojames7223]

I bought one of your series 4 kegerators, love it, the benefits of no longer having a Misers is, I thought one day, you know what? I think I'll buy one and I did

[@KegLand]

Top work. I know it's a bit of a commitment but nothing is better than having your favourite beverage on tap!

[@keithshoup]

SOOO much innovation from Kegland and the Land Down Under.

[@KegLand]

Thanks for that Mr Shoup. We really appreciate it!

[@Eat_The_Bugs]

all the rumors you heard about Aussies being big beer drinkers were true 😂 that's because we love our beer

[@Christoph1888]

Always wanted 8 and was looking at making a keezer. Awesome!

[@KegLand]

Go for it!

[@shanejorgensen8806]

Awesome. Looks fantastic. Have you thought about having a lockable fridge door? That way if it’s in your outdoor bar area it is more secure. Also mounting points for the inline regulators

[@KegLand]

Yes we have been thinking about having a toggle clamp on the side of the fridge that would allow locking. Also the toggle clamp will hold the door shut while the fridge is being transported with kegs inside or moved on castor wheels. We have been considering doing this so it's likely this will be implemented soon.

[@fdk7014]

Always these clever solutions! I love the carb cap gas hole idea! On my kegerator I just have a big hole where cold air can escape. Having a cap would lessen that but there are no threads there.

[@KegLand]

Yes I am surprised more kegerator manufacturers do not do the same thing. It's really handy!

[@domingodelci3574]

It would be really cool if you were able to use the same footprint to create one unit that had two temperature zones; one to ferment in and the other to serve from.

[@KegLand]

Yes that is a fair point. It would be difficult to do this without significant modifications so we will have to consider making a new model that can do this. Really it's going to be difficult to beat the RAPT Chamber for fermentation though as this is really the product for the job. www.kegland.com.au/rapt-temperature-controlled-fermentation-chamber-fridge.html

[@domingodelci3574]

@@KegLand True! Will there be plans to ship the RAPT to US distributors?

[@PortlyGentleman]

That thing is a beast 😍 The only thing it needs is an integrated glass rinser ! awesome product I love to get my hands on that BigBoy

[@KegLand]

We will look into this. It might be possible for us to sell a top cover that would replace the existing cover and this would enable you to plum mains water and have a glass rinser. I will bring this up with the other guys.

[@PortlyGentleman]

@@KegLand have you seen my video with my CO2 powered rinser ?

[@timmywalker3392]

Would be nice to be able to bolt the co2 bracket on the sides. One on each side.

[@KegLand]

Bummer. This was spoken about but then we did not end up doing this. I now am starting to regret we did not do this. I would agree a side mount gas cylinder position would be handy. I will talk to the other guys about this one and see what we can come up with.

[@kenhunt]

Should make a tower that connects both sides? Like the T but double-T. Would look slick and probably be just a little more stable? And also perhaps a way to hold two bottles? One for nitro and one for co2?

[@KegLand]

Yes I agree. Two cylinder holders is a good idea. I will talk to the others about this. When you say a double-T do you mean taps that come out from both sides of the kegerator? So you can serve beers from the front and back of the unit?

[@brandonnelson4164]

With inlets for multiple gas and water it seems like you would want to be able to attach multiple bottles to the rear of the unit.

[@KegLand]

You can but there is no need to unless you are using different gases.

[@hisparks]

LOVE YOUR PRODUCTS JUST ONE IDEA ABOUT THE DRIP TRAY CAN YOU HAVE A DRAIN HOSE FROM THE DRIP TRAY

[@birdybro9403]

She's a beauty mate!🍻

[@KegLand]

Yes absolutely. Now just have to work out how to build this into our outdoor BBQ area.

[@chrisville25]

Where's Brian from Short Circuited Brewers? I feel like this is you're doing. Thanks,

[@KegLand]

As soon as we make the 110V version we will get one over to Brian for him to check out. I would be keen to hear what he things of the new model.

[@lapintabrewing8801]

Beautiful!

[@KegLand]

Yes I would agree. A fridge like this is a thing of real beauty!

[@nstefanko]

Interested to hear more about the bladder dispenser. I guess that would be for wine or cold brew coffee for instance where you could still use your CO2 tank to dispense without actually adding any to the liquid?

[@dfross87]

It's designed for beer dispensing. The idea is that if the dispensing gas is not coming into contact with the beverage, you can use compressed air to dispense rather than CO2. Compressed air is much cheaper and more readily accessible than CO2,

[@nstefanko]

@@dfross87 ah that makes sense. Although that was basically the same concept of what I was saying.

[@KegLand]

Yes that is absolutely correct. We have been doing a lot of testing on this and we hope to do a video on this new product soon. It's a really cool option to be able to use compressed air or CO2 to dispense nitro beers. It really simplifies the whole setup and reduces cost.

[@normalguy7898]

Make the drip tray wrap properly around the taps for series X and this, for both plastic and stainless.

[@KegLand]

At the moment it does already wrap around. Do you mean wrap around further so you get better coverage?

[@normalguy7898]

@@KegLand the stainless steel one doesn't go around all four taps.

[@williammahley4876]

One more suggestion…, in looking at the tower font options I noticed all but the 4 tap version are 12.5” high. I have one this high and it’s too short! Can’t fill a proper Pilsner or Hefeweizen glass. My second tower is 14” high and allows 10.5” tall glass pours and growler fills. May I suggest offering tower fonts for all tap configuration with a minimum 10.5” distance between the drip tray and the tap spout? I’m sure this would greatly enhance this product’s desirability! This and the need for two cylinders on the back are the only impediments to my purchase.

[@KegLand]

Hey William. Thanks for the feedback. We really appreciate it. I will take this to the others and we will discuss at our next product development meeting. 10.5" is quite a large glass but I am sure other customers would have similarly large glasses from time to time too.

[@johnrobinson8941]

sound's great, just wondering if you would consider building a 12 keg kegerator? the amount of beer we go through here is unheard of, cheers 🍺

[@KegLand]

Ok. That will be the next challenge. We will look into this and see what we can come up with.

[@jasonwicks7491]

Does it have an option to attatch a python and use it as purely a keg fridge and dispense your beer at another location? Ie make those ports at the back of the unit bigger to run upto eight beer lines.

[@KegLand]

Hey Jason. If you were doing that it's probably easier for you to use the larger hole at the top of the kegerator where the font is normally attached and run the python out of the top hole.

[@bdavies5000]

Christ, it would take more than fizzy water to convince the wife to have this sat in the house. I'll dream on.

[@KegLand]

That's sat to hear. Maybe a keg of cider or rose instead?

[@ryanlee3853]

Hook up some wine to one of those taps and you'll sell it to her

[@brettnorman6964]

Great products! I am going to be adding lots of duetight fittings to my keezer and would love to know the fitting you have installed in the back that the carb cap threads into? The bulkhead I guess? Have looked in the comments and site and can't seem to find it? Don't know it this is only provided on the kegarator? If it is that would be a product worth selling as I would use a few! Thanks and keep up the great work!

[@KegLand]

These are PCO threads that come pre fabricated on the Series X and Series X plus kegerators.

[@72superlead]

Unfortunately such a long wait with no guarantee it won't sell out before I can get one so bought two series x instead 😎😁

[@KegLand]

Cold beer on tap is all that matters.

[@CK637]

This is exactly why I've been looking at keezers, and I'll be eagerly awaiting the US release in a couple months. One question: I was hoping to start with 4-6 taps now and add more over time, and don't see the point in buying one type of font/tower now, only to replace it shortly down the road. For simplicity and cost savings up front, I was wondering if you offer any type of plug that can be inserted in the extra holes in the font/tower if they don't have a tap occupying the space.

[@KegLand]

The easiest thing to do is get 2 x quad fonts and set them all up but not connect the beer and gas lines to any kegs.

[@bradk8978]

Know someone with a 3d printer, have one printed.😀

[@frankferber3225]

This is definitely better than building a keezer. How bout adding 2 more gas line ports since it has double the capacity as the 4 tap x model

[@KegLand]

The series X plus is an absolute beast. To be honest I do not see a real application for more than 2 gas lines. Most of your beers are going to be running at similar pressures and having an additional line for Nitro beers tends to be quite adequate. But this is definitely something we can think of incorporating if there is demand for it.

[@danielopelt1556]

Dose this make the gurgling noise the series x make. Such a annoying sound in the house

[@normalguy7898]

They all will do that with this style

[@aidanw2980]

yeah the series x is far from silent but i’ve kind of gotten used to the noises it makes.

[@KegLand]

The sound of these fridges is caused by refrigerant gas entering into the evaporator. It might be worse if the fridge has been turned sideways or upside down and oil has migrated into the evaporator where it should not be (this is one of the reasons it's important to let stand for 24hrs before turning the unit on.) In addition to this we use an evaporator that is exposed in the fridge and if you have a sound of refrigerant gas in the evaporator it becomes more noticeable. Many other fridges have the evaporator covered up with a shroud or plastic cover of foam cover than dampens the noise but this also consumes more power and is less efficient. So we have to choose between electrical efficiency and this refrigerant sound. It's still way more quiet than a Grand Deluxe but you might find the sound is slightly higher than some other domestic fridges. Either way you will find this to me more electrically efficient than the majority of other domestic fridge types.

[@aidanw2980]

@@KegLand i’m not knocking the product just stating that it is far from silent in respect to say a normal household fridge which still do make some noise. i’m normal circumstances you don’t really notice it however at night when the house is quiet you can hear when the kegerator kicks on but like i said i’ve just gotten used to it and don’t let it bother me.

[@kacerhomebeerbrewing]

Not bad guys... not bad at all!!!

[@KegLand]

No worries. We will get some over to America for you guys soon!

[@kacerhomebeerbrewing]

Cheers, but Im from Darwin NT mate ;))

[@Clockdistrict]

Any chance for two gas bottle holders? Would love to have both CO2 and nitrogen both mounted onto the back of a kegerator

[@KegLand]

That is a good point. As we have two ports we really should do this. I will talk to the others about possibly getting this done.

[@normalguy7898]

Looks like a nightmare to connect gas and beer lines to, tbh. Is it more powerful than series X or just same thing but wider?

[@KegLand]

It's more powerful than the normal Series X. It's about 30% more powerful.

[@CedricJason]

Any idea on when the full black items will be available worldwide? Would love to pre-order them at my retailer. (Brouwland) I'm going for the Series X 4 Tapwith the KL20077 Tower, KL20275 Collar, and 4 KL17978 Taps. :D

[@KegLand]

We have already shipped out the full black stuff to various distributors around the world. If you just remind Brouwland they will be able to order these now for you and hopefully we can get them dispatched on their next order.

[@brandonnelson4164]

Any availability in the US?

[@KegLand]

Best to check with MoreBeer or Williams brewing in the US.

[@Greta-Thunberg-How-Dare-You]

It's been 2 Months since your last video Mr Doery, I have had watch Mr Gash Slug's channel instead

[@Greta-Thunberg-How-Dare-You]

Oh I nearly forgot, how dare you!

[@KegLand]

@@Greta-Thunberg-How-Dare-You Hey Greta. Good to hear from you. Sorry it's been so long we will get a few more videos out very soon. Gash does have an awesome channel so it's not a bad consolation.

[@Peter-Southern-Victoria-Aust]

Who needs the Misers permission when you are single? .....'That's why I was able to buy a series 4'....this thing looks the beast, cheers 🍺

[@KegLand]

Thanks Peter. I miss being single for exactly that reason! : (

[@Peter-Southern-Victoria-Aust]

@@KegLand just wondering since you want people's thoughts on the keggerators I was wondering have you thought about putting a light inside these like you have with a fridge? I am always fumbling around in the dark trying to change fittings and sometimes you just need a bit of light to see what you are doing, I have mine in the corner of a room which isn't lit well

[@williammahley4876]

I’d like to be able to mount two 5 lb tanks on the back, one CO2 and one nitrogen beer gas.

[@KegLand]

Thanks for that. We have had a couple people suggest this so we are going to revise this design. I would agree it would be nice to have two cylinder brackets

[@jamespowell3056]

do you ship the gas bottle to new zealand?

[@KegLand]

We have distributors in NZ. The CO2 cylinder standards are technically the same but they are interpreted differently and NZ require different approval process. So if you purchase a KegLand Cylinder in Australia you might not be able to find someone to fill it in NZ. It's best that you purchase the CO2 cylinder in NZ.

[@jamespowell3056]

@@KegLand Thank you.

[@paul.vulcon]

I feel like it will never arrive, a combination of excitement and delay isn't the best for someone as impatient as I. Where is my instant gratification!!!!

[@KegLand]

A large shipment should be in by early next month!

[@joshharding6925]

Had mine ordered since October and still not arrived... Ordered from Brew Your Own at Home... Original cost on the Kegland website has progressively gone North also. Vapourware with an inflating price!? Come on Kegland...time to deliver to my liver!

[@KegLand]

We are facing some international shipping issues but we should have a large shipment coming in early next month.

[@joshharding6925]

@@KegLand kzbin.info/www/bejne/kGG8en2HZs-ae6s

[@stihl888]

Homer Simpson would be proud!

[@KegLand]

I sure hope so!

[@MrRocco1974]

If only you could buy one and not be constantly out of stock.

[@KegLand]

Yes we have many supply chain issues at the moment but by Jan next year I think a lot of the supply chain issues will be resolved.

[@ryanm9704]

'Words' most... ?

[@KegLand]

Haha thanks for pointing that out.

[@ryanm9704]

@@KegLand no problem, what's my prize? 🤓🍻

[@KegLand]

@@ryanm9704 Please remind us next time you make an order and we will throw in some free merchandise for you.

[@ryanm9704]

@@KegLand looks like I can't order to NZ 😔 will this ever change?

[@KegLand]

@@ryanm9704 We have on order from BrewShop.co.nz So if you check with them they should be able to give you an arrival date. The international shipping does take some time so it might be more than a month wait from now but best to check with them first.

[@RPR147]

OMG

[@KegLand]

indeed!

[@Kandikingdom]

Worlds*

[@KegLand]

Haha thanks for pointing that out.

[@Kandikingdom]

@@KegLand No worries! Watched. Mortal Kombat recently and pretty sure kee plays the main character Cole Young! 😂

[@monogramadikt5971]

ye olde carbonated water justification lol

[@KegLand]

Hahah always works!