WPL 4 wheel steering 4 modes. C14 and C24 Simple Mod.

[@123clis321]

I think it's nonsense to upgrade these shiity trucks that aren't quality until you spend a crap ton of money upgrading them. Why not start with an Axial and forget it?

[@RunThatRC]

I have high dollar RCs and have had 5th and 8th scale sct, buggys, monster trucks(nitro, gas and electric). Those are all awesome as well but they aren't the same scale unfortunately. Fully modded to my liking these cost me around 100 dollars(I already own tx's/rx's, Esc's so some may need to factor that in). That's not a ton of money compared to a stock 10th scale that will definitely get more upgrades and mods in its future as well. Scx24 are too small for my liking. These satisfy my need to tinker but to each his own as they say. That's what makes any hobby great! Not everyone likes and will buy the same thing and we should all be ok with that. After all it's your hobby and you should be doing it to satisfy yourself.

[@smannee]

Because they are cheap and most of us don’t take the hobby too seriously and we don’t need to clout chase by running a thousand dollar toy.

[@RainytheNB]

Let's see: You could start with a 200 dollar axial that's plastic, has no battery or radio, shitty tires, and a bad looking lexan body shell. You need to spend 500 bucks to get them up to spec. Or you could spend 200 dollars to get a full metal drivetrain, 2 speed gearbox, full size motor ( for their scale), hard shell scale body and most importantly... _just as much fun_

[@aerolazrul7337]

WPL and MN both got tonnes of accesories and can mod things at affordable price. As long as it can crawl, move to the front and backwards, steer left and right, its still an rc.

[@knetc6695]

It's for the people saving money per year

[@adamdavis5961]

I like the way you call us "enthusiasts" instead of addicts, junkies, or just big kids. It's so much classier. Thank you for having that much respect for us. It's getting so rare in this world today. Love the videos man.

[@izzzzzz6]

Around 50% off the C24 right now. Just bought one and found this video. Yesterday i bought a 4ws 3ch trx rx combo. I bought those to mod my Eedcat Everest 18 to 4ws. deffo going to do the same mod on both.

[@RunThatRC]

good find! 4ws mod is fun.

[@izzzzzz6]

@@RunThatRC i also just discovered the hobby king 1/24 with 4ws. Wish i had bought that instead of my devastator which keeps blowing motor pinions.

[@RCModSquad]

Great info, thanks for sharing. It’s interesting because I’m planning to build an outrigger boat and I found it cheaper to buy a complete new boat and strip the parts out of it than to just buy the parts I needed. When I’m done I’ll have a spare hull and radio for less money than just buying the parts I needed.

[@fixedgear.fl.4225]

Very cool. Bet it turns a tighter arc. Nice work

[@naelrc4583]

Thanks for sharing sir. Really appreciate & interesting mod. Keep it up!😁👍🏼👍🏼👍🏼

[@marionoskovic1337]

also thanks for the tip to buy just two whole kits thumbs up fellow enthusiast

[@vladHENARO]

WOW! you win!

[@PaulTancock-vo2lr]

Good info bro im new to the game and going through all the upgrades and thinking i may try the rear steering next . I broke the stock ones got the drop down axle on now but also got the military trax that dont work without the same axles so i have the corect military axles on the way so stoked.

[@RunThatRC]

these little rigs are addictive!

[@keefbrown]

If you used a y splitter on the servo you would still have a spare channel for the diff.

[@rc-huina8221]

Nice Video 😊👍

[@RunThatRC]

Thanks for the visit

[@NICKSSHOP]

thats very cool with the 4 wheel steer...

[@pintuajaib]

for the front and rear servo settings, do you use an additional module? or just y servo extension cable? or play the channel?

[@RunThatRC]

programming of the 4ws was all done by the HP-007 Hobbyporter Transmitter. Servos have there own channel and the tx has 4ws mods to control the servos.

[@marionoskovic1337]

nice mod I chopped up mine properly gona put a heli motor in it'll probably strip the gears but worth it

[@twain772]

RTR: As long as you have a 3 channel radio that is all the channels you will get out of it. you can use a y splitter for your steering and then use the 3rd channel for the 2 speed but it won't work the way you have it set up. you would need a radio and a receiver that have more than 3 channels.

[@RunThatRC]

My gt3c has 8 channels(hacked firmware). I just need a receiver with more channels but I still need to get one! I just have it the way it is still without the 2 speed.

[@darrenmackenzie1645]

Hey David, just got a C24-1. Love the videos. Where did you get those metal steering link bushings for the front of the 4 wheel steering rig? Did the metal axle swap on mine and I need to tighten up my links more. Got some play in them. Bushings will tighten that up more.

[@RunThatRC]

You can find parts for these on ebay. That's where I got the links unfortunately can't send a link because they seller is no longer selling these.

[@jonathanbarnette8713]

How do I program my new controler fs-gt2b with my c24 RTR ?

[@RunThatRC]

if your C24 is a factory stock RTR then you will also need a esc to go with the gt2b receiver. It will not work with the wpl esc receiver combo unfortunately.

[@jonathanbarnette8713]

@@RunThatRC ok thanks got 1 on the way! One more question.for speed is the 370motor 2 speed transmission the way to go?

[@VoidXRC]

Great mod!

[@RunThatRC]

It's a good simple mod as well. A 4ws capable transmitter and 2 wpl C chassis trucks. And the fun part is building it! Well for me at least👌

[@EdwinSoedarmawan]

Wow.. been 2 years. Hope you still answer it. Is it possible to paralel both servo (front and rear) and goes into the same channel? Thanks

[@RunThatRC]

You can use a y splitter but you will either get full time crab or full time 4ws doing this method. All depends on the servos you use. Nothing simpler than using a 4ws capable transmitter like the one I'm using and the FlySky GT5 transmitter or a hacked gt3.

[@EdwinSoedarmawan]

@@RunThatRC Thank's mate.. I'll do the easy way then

[@KlunkersKustoms]

awesome

[@RunThatRC]

it was one of my favorite simple builds.

[@yentad9920]

nice

[@carlosavila8168]

Hola me gustaría saber como poder programar el radiocontrol para poder hacer lo que usted hace con la dirección. Yo tengo un radiocontrol igual y el mismo wpl y no puedo hacerlo. Gracias un saludo

[@RunThatRC]

what tx are you using?

[@carlosavila8168]

@@RunThatRC hola de nuevo. No se lo que un tx

[@soldier_of_anarchy]

Здравствуйте, подскажите пожалуйста как мы запрограммировали аппаратуру так что бы второй сервопривод синхронно с первым управлялся?

[@RunThatRC]

you have to use a transmitter and receiver that is capable of 4 wheel steering. You can have a permanent 4 wheel steering rig with a y connector to run 2 servos on a regular transmitter receiver without that function.

[@miyamotosan972]

Is there a way of upgrading the steering angle without 4 wheel steering?

[@RunThatRC]

the newer metal upgrade front axle with U joint wheel hexes and metal c hubs have a better steering angle.

[@miyamotosan972]

@@RunThatRC Thx, that's what I wanted to know. I think I will install one on my c24 and I might make it 4 wheel steer too.

[@anthonysantos1142]

Is their only kit versions?

[@RunThatRC]

they also have ready to runs but they do not come with what the kits come with.

[@anthonysantos1142]

@@RunThatRC thx just wanted to know👍

[@x3nonzairsoft764]

Are u using lipo battery

[@RunThatRC]

Yes 2s 500mah and 1000mah lipos. Also use some nimh 1000mah.

[@x3nonzairsoft764]

@@RunThatRC can i use NI-CD 700 mah 7.2v?

[@RunThatRC]

@@x3nonzairsoft764 do you have a rtr or a kit? I think you can't use a higher voltage than stock battery for the rtr version. If you have a kit and install 10 to 30 amp cheap esc you can run up to 2s lipo(don't forget lipo alarm if esc has no lipo cutoff).

[@x3nonzairsoft764]

@@RunThatRC i have rtr but i just wanna upgrade the motor for the bigger one i try that using NI-CD 700mah 6v i now i wannna try using 7.2v can i?

[@RunThatRC]

@@x3nonzairsoft764 not sure if you can. I heard the stock RTR electronics can't handle anything but the battery it came with. I dont own a rtr at the moment to test it.

[@alexhulse6023]

What steering servo should I look for?

[@RunThatRC]

sorry im no help in this department. I use the stock servo they come with. When I go on banggood I see some metal gear ones labeled for mn model and wpl. I'm sure ebay and other websites have some that are advertised for wpl.

[@syahrulzahrin2545]

What type of remote if i want to build 4ws

[@RunThatRC]

I use a hacked flysky gt3c or the Hobbyporter HP 007 tx/rx is a good one as well for 4 wheel steering capabilities out the box with a waterproof receiver included. kzbin.info/www/bejne/f56knGOno9KKrrM

[@syahrulzahrin2545]

@@RunThatRC hacked fly sky gt3c.. did u hacked it by ur self? How to do it..hard to find hobby porter hp 007 in my country....

[@marcusrcs1885]

300th like I'll do this to my new kit xd

[@MKHITARIANVahram]

Лайк1 super 👍😀

[@tommitchell717]

Good except colour choices (red)

[@zulfadlikatirin8037]

How can you hack the firmware of gt3c? Can you teach me.. i own gt3b and im thinking to make it to 8 channels like yours..

[@RunThatRC]

You can search on Google or KZbin for info on how to hack the gt3c and b tx. I did not do it myself I paid someone to do it. But I heard it is easy and isn't expensive to buy the equipment needed so if you know how to solder and use a computer it can be accomplished.

[@kampkrieger]

the other truck is a zero wheel steering car perfect for driving straight

[@anomalyearth8437]

lol, maybe it can be modded as a train, just need to figure out how to make the rail

[@ketchupmustard5465]

Hey to anyone watching this video. I was hoping for a real review of ordering these parts from banggood. I ordered a c24 and a bunch of parts to make a real crawler from banggood. But I live in the US and have been waiting quit some time for my parts. Any advice or help would be greatly appreciated. Great video bubba.

[@RunThatRC]

my experience with banggood is always order and pay shipping. If you use free shipping it will take forever to get to you. usually get my stuff in about 2 to 3 weeks. When free shipping is used I have waited 3 months before.

[@yasinehadji5404]

كم سعرها من فضلك