Рет қаралды 68,077
Application
1. The application surface must be clean, dry and grease-free.
2. Remove dissolved rust, paint and dirt with a wire brush, scraper etc.
3. Lightly sand problematic surfaces.
4. Shake can well before use.
5. Apply a thin coat for the first spray coating.
6. Observe the flash-off time.
7. Drying time 25 minutes.
8. Can be painted after approx. 10-15 minutes with all commercially available 1-component, 2-component and water-based top-coat paint systems.
Tips & Tricks
Turn can upside down and spray until valve is empty after use.