X PRO TEMPLAR X 250cc Great beginner bike!!

What’s up guys and gals I know this video isn’t the best but I hope it helps you in some way. I did receive the MSO and will get the bike registered. Honestly took me a couple hours to put together. Will post a 2nd video on the carb install. The other 3 channels that I thought were good are ‪@Mikefestiva‬ and ‪@lmfscrew‬ along with ‪@Mikeysparts‬ be sure to check them out!
Carb
www.amazon.com...
Chain
www.amazon.com...
Rear sprocket
www.amazon.com...
I purchased the bike from PowerSportsMax for right at 2k. Took a week to be delivered.

[@flyprincess69]

I own a 2022 Xpro Titan 250 DLX. In my experience unboxing and install. I saw some wonky stuff when it comes to plastics not fitting. With some bending it went together. I made sure to grease up wheels, used lock tight and followed the break in instructions. I installed a 19” front rim and put Shinko 705 tires for a quasi supermoto look. Super smooth on the street, if your a commuter.

[@CheapBikeOwner]

I’ve heard great things about those tires, I wanna get some!

[@jakejames1977]

You want your clutch lever to have a little free play in it. Change the oil in it to a good quality oil. I would recommend non synthetic for engine break in then run synthetic oil after break in. Check to see if your front rim is bent that could be why the front end feels weird. You should have two to three fingers of free play in you drive chain right behind chain slider on swingarm.

[@CheapBikeOwner]

Thank you I’ll keep that in mind!

[@michaeldavison430]

Have had this same bike since last spring, it has been excellent. As long as you are mechanically handy and dont mind basic maintenance these really are great simple bikes. Keep your expectations in check, this is not a "race ready" KTM but a fun little trail bike. Balance your front wheel, or have it balanced and the front end will feel better, this is a dirtbike with a rimlock so it will be quite a bit out of balance in stock form, this is true of all manufacturers.

[@CheapBikeOwner]

That explains why my front wheel feels wobbly

[@travismerica5332]

Your exhaust is red because it's running lean. I had the same problem and rejetting fixed the issue

[@CheapBikeOwner]

Did you go with a smaller jet size?

[@travismerica5332]

@@CheapBikeOwner no I went from stock 40 120 to 42 125 I think.

[@CheapBikeOwner]

@@travismerica5332 ohh ok thanks for the heads up! I recently installed the nibi carb as well

[@K_Nasty]

So the specs for the intake and air filter are 50mm and 35 mm so I found a 30mmpwk carb that still has those dimensions and I'm 99% going to try that one

[@rider65]

Awesome video! Yeah Mike has some good videos as well on the X pro. 👍 could you provide a list of the modifications and upgrades you made to the bike? Thanks

[@CheapBikeOwner]

I have an upgraded nibbi carb, smaller rear sprocket with better chain.

[@timsigmond8984]

Keep us posted on how it holds up, bought mine three months ago, for the money I impressed,

[@CheapBikeOwner]

I definitely will!

[@Coco-Crisp25]

Thanks for the video!!! Love the bike and I’ve been thinking hard about getting this exact bike. Would you be able to do a video showing yourself on the bike. I’m about 6’3” also and would love to see how the bike handles our height. I’m afraid of looking like I stole my kids bike 😂. Thanks again! Enjoy your new ride!! 🎉

[@CheapBikeOwner]

I definitely will and thank you! I’m slacking on uploading but I will tonight😂

[@jessarellanes6648]

Nice.

[@toothytube]

I hope you did not ride the bike very far before jejetting/enrichening that mixture. As that lean of a mixture would have prematurely damaged the top end of your engine.

[@CheapBikeOwner]

I didn’t run it long with the stock carb installed

[@LFOMUSIK]

What size is the kick starter

[@Jovanny1999]

Hey what’s the pattern of the speeds on the kick lever. Does it go Down 1 Neutral, Up 2 first speed, Up 3 second speed. Do you understand what I’m trying to say. Can I get a reply bro please.

[@CheapBikeOwner]

Yeah it’s 1 down, neutral, then 5 up

[@Jovanny1999]

@theonlybippufocus is it hard to learn bro?

[@Jovanny1999]

@theonlybippufocus thanks for replying too

[@CheapBikeOwner]

@@Jovanny1999 no it’s not! I’ve had some experience though

[@Jovanny1999]

@theonlybippufocus I like your bike bro damn I can’t wait to order mine. You should of ordered it assembled from Amazon :p but then again I’m lazy haha

[@gsheverything_2716]

I don't know shiit about bikes, but i want to buy one, cause they seem affordable...

[@CheapBikeOwner]

They are affordable but remember you pay for what you get. Great first bike

[@gsheverything_2716]

@@CheapBikeOwner yeah for sure, I head that from the other guys, I just want something to get my foot wet

[@misha2.097]

DUDE... DO NOT rip around the block without draining the "oil" it came in. The "oil" inside of it is not oil but a oil substance so that nothing corrodes while its sitting and waiting for a buyer. You will need to drain it an change it or else tou will damage your engine. Being that you did rip it around the block b4 chanhing the "oil" im guessing your bike isnt around anymore? And the reason your exhaust is red hot is because you habe too much gas running through your carb. You will need to adjust n tune your carb

[@CheapBikeOwner]

I can’t remember if I changed the oil before ripping it around the block but you’re right about the carb tuning 😅

[@jimstenlund6017]

A “oil substance”? It’s break-in oil, just plain mineral oil, use it like 50 miles.

[@Ganequis]

Is this bike street legal in Texas?

[@CheapBikeOwner]

I believe so but I live in Washington but I’m from Texas so I’m not sure lol

[@Tatted_up_wood]

Was it a problem getting it registered

[@CheapBikeOwner]

No