X32/M32 Complete Routing Using X32 Rack as Stagebox V4.0

I was very confused by previous KZbin tutorials on how exactly especially to get my front of house left and right back to an X32 rack which I'm using as my stage box. I've also included how I've routed the USB cards to go over AES50

[@loccomotive2485]

Thanks mate, good explanation - exactly what I was looking for ;-)

[@LoftonSpace]

Glad to hear it!

[@keithkozma]

This is exactly what I've been looking for thank you! Wondering if you can help with my unique situation. I have a full x32 console with an x32 rack setup as a stage box. Both mixers are connected to their own amps and speakers. I need for the things plugged into the x32 rack to output from the x32 rack only and the things in the full console output there only. Ie I can't have output from the things connected to the x32 rack output from the console and vice versa. Hope that makes sense and thanks in advance!

[@LoftonSpace]

Sorry for the delayed reply. KZbin marked your comment for hold and review, so I haven't seen it until today. So basically, you want each set of outputs to route independantly of each other (x32 rack and x32 console)? If I understood that correctly, You could just use AES50 A for one console and AES50 B for the other in your routing scheme. Adding a dante card could also allow you to route channels in different subnets on your network. I hope that helps. Cheers, LoftonSpace

[@lemontree15]

What do I need to change to get my outputs 1-8 out from the x32 producer and outputs 9-16 on the physical outputs 1-8 on the x32 rack? Please help me I can't get That figured out correctly

[@LoftonSpace]

X32P Routing > AES50 > Source Out 1-8 - Output AES50 1-8. Then on X32R > Routing > XLR > Source AES50 1-80 - Outputs 1-4 & 5-8. This will route the first 8 channels of audio from the X32P to the first 8 channels of digital audio on the AES50 connection to the physical first 8 outputs on your X32R. I hope this is what you are asking for. Neither X32R or X32P have physical outputs on 9-16 but 9-16 can be routed to 1-8. But you can only have one source assigned to 1-8.

[@88mokeyz8k]

I just purchase and X32 Rack for my studio. But, b/c of my gear. I need 2 s32 or ? Should I buy x32 mixer? Are is its even possibile to connect 2 s32?

[@LoftonSpace]

You can link any of the x32 series mixers together with AES50. One just acts as a slave to the other.

[@ugniusuzkuraitis9658]

Where did you find version 4 firmware update for x32rack? There is no available update files in the official site...

[@LoftonSpace]

Sorry for a super late reply but the firmware update for for x32rack can be found here. mediadl.musictribe.com/download/software/behringer/X32/X32_Firmware_4.06.zip

[@3stanJazzSoundsAndLights]

Can I do m32 and x32rack

[@LoftonSpace]

Yes, they bother support AES50 digital connections.

[@13amplifiers]

Seasick from the camera work! Otherwise, very interesting. :)

[@LoftonSpace]

Sorry about that

[@rufuscrowder1309]

Good info but your camera work needs to be better!! Holy moly!

[@LoftonSpace]

Sorry about that. Demonstrating and filming at the same time don't mix but now the new studio is all set up so demonstrations like that shouldn't be an issue any longer.