XRS™ Connect Priority Scan | GME

[@damodoesall6240]

Tony rocking the beard to perfection again !

[@KevinJ682]

Thank you for this, I’ve tried several times to get this working using the manual to no avail, one little video and all is explained, absolutely wonderful

[@tr109ad4]

Perfect I tired via manual no good video perfect mate. Keep them coming.

[@dunco1955]

Thanks heaps. Just what I wanted to know....keep 'em coming :)

[@stuartkcalvin]

Thanks mate. As a male, I chucked out the instructions when unboxing.

[@JyeSmithx]

have you guys done a net scan video yet?

[@rossholmes178]

Thanks Tony, much appreciated info. One question though...how does one remove a channel from priority scan?

[@t000nz]

Same process as adding a channel - go to the channel you wish to remove and press & hold the scan button

[@w.bridges9118]

Can you please do a review on the 5 wat hand held, thank you.

[@GMEaus]

Thanks for the feedback, we will pass the suggestion on to the team!

[@johnstephens2646]

Can you answer any of the Channel’s selected when you are in priority Scan and does it then return to scan automatically after finish

[@GMEaus]

When in Priority Scan pressing the PTT at any time will transmit on the Priority channel, not any other channels.

[@aussiebriggsfamily]

Can confirm you showed two things- open scan including priority channel every 5 secs and secondly priority scanning being just scanning selected channels? There’s no way to mesh them together- open scan checking all channels but checking each of the selected channels every 5 secs?

[@GMEaus]

You can do this on certain radios (e.g. XRS-660, TX6600S) that feature multiple priority channels, by setting multiple priority channels and running open scan.

[@shafmahar4974]

Hey Tony, could you please with CTCSS/DTS settings? Manual steps aren’t working fine. Thanks mate

[@GMEaus]

Hi there, Thanks for the feedback! We will pass the feedback on for the team to cover CTCSS/DTS settings in an upcoming video.

[@ErrolMarshall-lq3jd]

Watched your video on setting priority channels but the functions described do not fit with the TX634b . Is there a video specific to this model?

[@GMEaus]

Hi Errol, this tutorial is only for the XRS range. There is no video specific to that model but we will pass the feedback on to the team!

[@Chris-sf2cp]

What’s the difference dual watch and priority scan? They seem similar

[@GMEaus]

Although similar Dual-Watch allows users to quickly program a small scan group to monitor two channels, with additional scan time for your selected priority channel. Hope this helps!

[@tonybrann4842]

If I go to say, zone 3 , can I customise this zone, specifically my priority channels, without affecting all the others zones? Cheers!

[@GMEaus]

Hi Tony, yes that is correct! Editing a zone will only affect that zone and not the others.

[@MrHsv123]

I set my priority channels problem is if some transmits on a station it doesn’t stay there when I press the mic it always reverts to 40.Any ideas

[@GMEaus]

That is strange! We would recommend doing a factory reset on the unit and if the issue still persists please give our tech support team a call on 1300463463 and they will be able to assist!

[@tomdouglas3179]

How do get rid of priority channel? I don’t want it

[@tomdouglas3179]

Tx3500

[@GMEaus]

Hi Tom, to best resolve this we recommend giving our tech team a call on 1300463463 and they can advise.