xTool F1 ULTRA - Unboxing, Setup, Features, Upgrades and Accessories!

In this video we're going to be taking a first look at the xTool F1 Ultra in the unboxing and setup process. I've already designed a few upgrades and accessories so we'll touch on those, and talk about the features of the F1 Ultra dual laser system.
I've had the privilege of getting my hands on this machine prior to the official release date so I'm able to share it with you guys. Right now xTool is running a pre-release sale where you can save $1000 on the F1 Ultra - check the link below for this offer:
► www.xtool.com/pages/f1-ultra-...
If you've already placed your deposit on the F1 ULTRA, or are watching this video in the future and already have the F1 ULTRA, you can find the controller holder and mount at the link below:
► embracemaking.com/products/xt...
Here, you can find the F1 to F1 ULTRA fixture adapter:
► embracemaking.com/products/xt...
and here you can find the 3" to 4" Hose Adapter:
► embracemaking.com/products/3-...
The xTool F1 Ultra is the next generation of the original F1 dual laser machine with a much larger work area and much more power. The dual laser still features a blue diode laser, but now it is 20W vs the original 10W. Also, it now also features a 20W fiber laser, where the wavelength is still 1064nm which is the same as the original F1 IR laser, but it is 10x the peak power.
The galvanometer system does not have heavy moving parts like traditional desktop gantry lasers. Also, the fully enclosed work area enhances user safety vs. other desktop fiber lasers on the market.
In the future I'll be showcasing the conveyor belt system with autofocus and auto placement of graphics using the integrated camera system. Be sure to subscribe so you don't miss that!
If you're looking for some of the other xTool products I've shown in this video, you can find them here:
Smoke and Fume Filtration System:
► www.xtool.com/products/pre-or...
6" Inline Duct Fan:
► www.xtool.com/products/xtool-...
If you're looking for the original F1 Fixtures to handle a huge variety of popular items:
F1 V-Block, Pencil, Bottle Opener Jig
► embracemaking.com/products/xt...
F1 Multi-Fixture Kit:
► embracemaking.com/products/xt...
If you are looking for products or items I've used with in this video, see below. As an Amazon Associate may I earn from qualifying purchases (at no extra cost to you):
Electric Screwdriver:
► amzn.to/3P43fpz
Digital Calipers:
► amzn.to/48IQh7w
4" Inline Duct Fan with Controller:
► amzn.to/4a91Nd4
Electric Air Duster
► amzn.to/3UHdyDe
Air Quality Monitor
► amzn.to/3y1fBZU
0:00 Intro
1:03 Unboxing
3:46 Setup
7:40 Features
#xTool #xToollasermachine #fiberlaser #laserbusiness #metallasercuttingmachine
Thank you to @xToollaser for supplying me with the xTool F1 Ultra
*******************************************************
If you have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► www.paypal.com/donate/?hosted...
Follow me on Instagram!
► / embracemaking

[@annamaldivad]

Great video! This laser looks really impressive. I think I'll be putting down a deposit. Keep up the videos!

[@EmbraceMaking]

Amazing, be sure to use the link in the video description to save $1000 !

[@ADVR-xq5or]

This looks really cool. It'll definitely help me with my custom metal coasters.

[@EmbraceMaking]

The deep engrave can get you some nice depth now

[@locksmithinginnovation11]

This is the best F1 Ultra video I have seen yet, I also like that you have already started to create accessories. I will purchasing these accessories after I finish paying for my F1 Ultra and conveyor.

[@EmbraceMaking]

Thanks! More videos and accessories on the way!

[@tooltimebarbie]

I am absolutely MIND BLOWN by your video!!! I am not only more impressed with xtool but now looking to upgrade my F1 to the F1 Ultra just based off the clear consise content of this video, so thank you! I was just about to order a laser pecker or another fiber machine but now I’m only wanting the F1 ultra.

[@EmbraceMaking]

Thank you so much for the compliment! If you put the deposit down on the F1 ultra be sure to use my link in the video description as it helps support my channel. I'll have more F1 ultra content that I'm sure you'll enjoy on the way!

[@BITDGPRIME]

As usual, very detailed and informative.

[@EmbraceMaking]

Appreciate that!

[@Kevin-oz9fw]

I’m confused. Usually a new product is issued on its release date. But lots of KZbinrs have the product and are showing the product and even how to set it up, but they can’t show using it until the release date, but you can buy it now. How can you tell if it’s any good if they don’t show you using it. What are the good points and what are the bad points? This isn’t an indigo release. Even the updated software is out now. So once the release date?

[@beamituplaserworks]

Tomorrow is the official release of the Ultra and XTool is doing a live event on YT. Once that happens, I’m positive all of the user videos and reviews will be dropped like crazy along with a lot of information and opinions of the machine. It’s not unusual for companies to place embargoes on early access participants of their IP.

[@Steeeeeve95]

Will this be compatible with Lightburn? Will it work with a MacBook? D1 pro with XCS does not work well with a MacBook so I had to go with Lightburn.

[@EmbraceMaking]

I believe it should be - but as with some of the other xTool machines I don't think you will get all of the features when using lightburn. For example, on the S1 and P2 there is curved surface engraving but to my understanding this is not supported in Lightburn.

[@ToolnKnives]

Great video, I sure hope I'm one of the lucky ones who gets one.

[@terryclair2914]

I'm really interested in this unit but does the F1 Ultra have WiFi / SD Card capability or only computer interface to send files. WiFi would sure be nice.

[@EmbraceMaking]

WiFi and USB for local operation as well using the touchscreen controller. No more tethering direct to laptop. Some of the older machines like the regular F1 and even D1 pro have had WiFi for a while now. Xtool creative space 2.0 can also now handle multiple connections at once so you can simultaneously operate various Xtool machines for production

[@terryclair2914]

@@EmbraceMaking Thank you!

[@doen.8724]

Is it Lightburn compatible?

[@EmbraceMaking]

Like most xTool machines it is quasi compatible... You can do the basic stuff with Lightburn but the more advanced features like the 3d curved surface engrave etc will probably not work with lightburn

[@elainesaxon759]

Will this machine do a full wrap on a tumbler? I can't tell if the whole tumbler will fit under the laser.

[@EmbraceMaking]

How long is your tumbler, I can check for you :)

[@elainesaxon759]

@@EmbraceMaking 7 3/4" for a 20 oz or 12.3" for a 40 oz.

[@SladeGrovetv]

a hardware dongle to enable the machine to use? Just like a software dongle key? What? What's the actual hidden purpose of such a dongle key?

[@EmbraceMaking]

It's like a safety lockout. You can remove the USB key if you are working inside the machine, for example adjusting the red dot laser, and want to make sure the blue and fiber laser cannot turn on to burn you or blind you

[@ThatGuyWithaLaser]

Hope I get to make content for them 🙏

[@ryanweller6242]

Great video! I did the survey so hopefully we can review this also.

[@EmbraceMaking]

Thanks! Hope you get it!

[@tonyriek4997]

Too much money for those who did not get it for free.