xTool P2 CO2 LASER CUTTER CONVEYOR INSTALL INSTRUCTIONS

  Рет қаралды 2,490

Wood Nerds

Wood Nerds

Күн бұрын

Пікірлер: 17
@ulaB
@ulaB 9 ай бұрын
In Germany we'd actually say "Nach fest kommt ab." ("Tight is followed by broken.")
@WoodNerds
@WoodNerds 9 ай бұрын
That’s an awesome saying! I’m going to write that down haha. Thanks for sharing!
@Daniel_Connor_
@Daniel_Connor_ 5 ай бұрын
Great video! Interesting that all 4 of my conveyors are the same- none have the metal marking. I hope it's some change they made and not an error...
@WoodNerds
@WoodNerds 5 ай бұрын
Thank you! That is interesting! Maybe they are all metal now? I could see that being an item they have to keep replacing for people who accidentally melted the plastic ones. Would be cheaper to just make them all metal and save their customers the headache.
@GallerWorks
@GallerWorks 4 ай бұрын
Very helpful video. Thanks for the explanation.
@WoodNerds
@WoodNerds 4 ай бұрын
I appreciate that! Thanks for watching and taking time to comment!
@thaught9475
@thaught9475 9 ай бұрын
I don't even have a laser cutter, but I found this super interesting from a mechanical perspective. It'll be interesting to see what else it can do.
@WoodNerds
@WoodNerds 9 ай бұрын
Thanks man! It’s a unique tool for sure. Been thinking of ways for it to solve unique problems. Thanks for watching and commenting!
@juststretch26
@juststretch26 9 ай бұрын
I can't seem to find part 2 of this video. Have you posted it yet?
@WoodNerds
@WoodNerds 9 ай бұрын
Hey! I’m editing it as we speak! Likely post later this week!
@juststretch26
@juststretch26 9 ай бұрын
@@WoodNerds Thanks for your response. I'm looking forward to this video! Great work.
@WoodNerds
@WoodNerds 9 ай бұрын
@juststretch26 that means a lot! Thank you! Coming soon!
@classonglass
@classonglass 8 ай бұрын
Hi from Scotland 👋 thank you for making this video I followed it along as I built my conveyor😊 I have two questions. 1. In the box it came with a silver rod where does that go? 2. I started lasering a splashback last night, I normally do this by hand using my hand engraving machine but thought using a laser would be much quicker. It started of great then I noticed the glass wasn’t moving so I tightened it. This happened a further two times…..my conclusion was that the glass (shiny side down as I engrave the back) was too smooth and the rollers were not getting a good grip….do you think my guess is right? So my plan is to cut a piece of hardboard the same size as the splash back and lay the splashback on to that then run it through the machine so the hardboard is in contact with the bottom rollers. 😊
@WoodNerds
@WoodNerds 8 ай бұрын
Hi! Hope all is well in Scotland! 🏴󠁧󠁢󠁳󠁣󠁴󠁿 Of course! The rod is for leather and paper cutting applications. I didn’t have any materials like that to test it haha. I haven’t engraved glass yet but I can see the rollers having trouble feeding that material. I think your solution is elegant and makes sense to me. Might need double sided tape to keep them together.
@classonglass
@classonglass 8 ай бұрын
@@WoodNerds hey 👋 it’s cold but ok🥶. My plan worked, I went out this morning and purchased a 9mm sheet of mdf put the splashback on top and it worked like a charm 😊😊
@WoodNerds
@WoodNerds 8 ай бұрын
@classonglass haha we recently got an arctic front so it was abnormally chilly here. That’s good news! Glad it worked out! I just watched your video on etching Taylor swifts face on a whiskey glass! Great video!
@classonglass
@classonglass 8 ай бұрын
@@WoodNerds thanks 😊😊
xTool P2 55w CO2 laser - Introduction and project results
32:31
Ozoda - Lada (Official Music Video)
06:07
Ozoda
Рет қаралды 14 МЛН
The day of the sea 😂 #shorts by Leisi Crazy
00:22
Leisi Crazy
Рет қаралды 2,2 МЛН
Миллионер | 1 - серия
34:31
Million Show
Рет қаралды 2 МЛН
XTool P2 CONVEYOR....Complete SET-UP And First Use
27:32
Spicer Designs
Рет қаралды 21 М.
xTool P2 CO2 LASER CUTTER | FULL SETUP AND ACCURACY TESTING
28:30
Tool P2 Conveyor Assembly and Setup
19:07
Monkey Woodworks and More
Рет қаралды 1,6 М.
Unboxing xTool P2 Automatic Conveyor Feeder
9:02
xTool
Рет қаралды 4,2 М.
Laser Cutting Made Easy??  XTOOL P2 C02 Laser Unboxing & First Use
13:33
How to use the xTool P2 Automatic Conveyor
12:00
Monkey Woodworks and More
Рет қаралды 1,6 М.
How To Make A Sign
15:19
Wood Nerds
Рет қаралды 1,6 М.
Making Metal Posters W/ The xTool P2 Automatic Conveyor Feeder
10:18
Watch This Before Buying a Laser Cutter & Engraver in 2024
30:49
Make or Break Shop
Рет қаралды 49 М.