Xtreme Web Updater for Flipper Zero + ESP Flasher Marauder/Evil Portal

[@pvc7387]

ever since i installed my flipper with the extreme firmware it has been unstable and keeps on crashing. sad, this looked like good software

[@shelbywhite4602]

im having trouble using the esp flasher . im tring to flash a flipper classic dev board and im getting a failed to mount sd card message at the end . its not working , any pointers would help

[@lucaswilson5036]

This just means you have no sd card on your board. You don’t need one so the error means nothing. Everything should still work fine

[@Keitdhd]

really great videos i went threw almost 100 videos and thank god you posted this video your video was the only thing to have evil portal working i have an question, how can i change the log in link to say log in to google and it says put gmail and password?

[@SacredAntwon]

Hey! I'm glad you got it working. In order to do that you would need to either make or find an html that has the google layout. I'm sure there are people online that share their html which you could then import into your evil portal apps data folder.

[@Daut-lm9cv]

Does it work with the WIFI dev board too?

[@sh4ba]

yes

[@patilakash]

Thanks for the great content. I'm using an unleashed firmware but somehow I'm getting an error with Evil Portal on the Setting HTML. It is stuck on it and not able to create the Portal ap.config.txt and index.html Files are there in the apps_data/evil_portal folder what am I doing wrong. Can you please help?

[@SacredAntwon]

You would need to look into how to do it with unleashed. I have only done this with Xtreme

[@SFEMPEROR]

When going into subGHz, opening radio settings, it only has internal, external isn’t available. What should I do?

[@SacredAntwon]

Please message me on etsy with the account you ordered with if you purchased the board from me.

[@Faby246]

Great content 👍

[@SacredAntwon]

Thank you!

[@Faby246]

@@SacredAntwon np Bro remember what I told you okay 👍

[@SacredAntwon]

I got you!

[@champyboyq3977]

ive been trying to make the esp boot for like a day now but every time i try to run maurader falsh it says the board inst in boot mode if you could help that would be great!!

[@TK-ej6ks]

what board are you using?

[@dbz4o719]

When I try to flash it runs then when it hits the end says “no core dump partition found” and says “failed to mount sd “ and “sd not supported” but it’s a sandisk sd I went out of my way to grab now I can’t find anymore answers to why I can’t get it to flash it is a sandisk ultra 32 any help would be appreciated

[@yetiboss412]

Same issue here

[@dbz4o719]

@@yetiboss412 figured it out I didn’t have the sd mounted to the board so I had to flash it manually off my pc then ran fine! Don’t think it mounts without an sd attachment soldered onto the back of the board

[@FAIZANMALIK-d2f]

Bro can I still get a flipper in 2024 in uk or even America

[@SacredAntwon]

In the USA you could and they're in stock but not sure about the others. I checked the official UK distributor and it seems like they are out of stock.

[@FAIZANMALIK-d2f]

@@SacredAntwon hey bro do you know when they will be back in stocks or is it possible i can buy it from, you or you ship it to me please let me know

[@jojo66612]

I done everything you done in this video and now my esp32 board doesn't even light up when I plug it in and when I do and go on evil portal, it comes up saying error, help please

[@SacredAntwon]

Hey! Do you have the Ultra or Classic?

[@jojo66612]

@@SacredAntwon just the classic esp32

[@SacredAntwon]

@@jojo66612 message me on Etsy with the account you ordered with. Seems like the ESP32 may have issues.

[@SH-tx3gu]

Can you add html for a new landing page

[@premiumocto1198]

Says I have invalid chip ID ? Any ideas on what to do. Great video though :)

[@SacredAntwon]

In ESP Flasher make sure to select the correct chip. My boards have WROOM chips so I select the WROOM option. If you have another board check what chip you have. Thank you!

[@WPGinterceptor460Interceptor]

at 03:55 select quick flash then select the TOP FLASH instead of the bottom like he did in this video, then rest is same!

[@markhealth7857]

I did this also but when I try to re flash with the correct chip selected it says, ‘make sure it’s in boot loader mode and try again’. I’m holding in boot and pressing reset but it’s not going to bootloader mode, any help please?

[@WPGinterceptor460Interceptor]

keep trying.. hold down the boot button and while holding down BOOT push and release RESET and then release BOOT.. took me 3-4 times to get it right@@markhealth7857

[@pauljackson8425]

@@WPGinterceptor460Interceptorsolid!

[@ichikurataichou3119]

Wifi folder will not show up. Or is it hidden somewhere

[@thewhiteknight02]

Press up

[@TheMatthewbarone]

I’m getting 0kb pcap files. Any idea why?

[@Kevin-nw9om]

Me too. I thing coco updated the rom for this.

[@ducthaiminh2597]

How to charge flipper zero battery?

[@SacredAntwon]

Use the USB-C port on the right side of the flipper zero to charge it.

[@ducthaiminh2597]

@@SacredAntwon I mean you charge it directly from a laptop or something

[@cameronrich2536]

Big l for that hot plug

[@SacredAntwon]

True ;(

[@jonjohnson7823]

So don’t hot plug?