Banshee 4mil motor assembly. 58x115 crank with stock cylinders. My MX hardcore trail port for the 4mil long rod and some other little goodies tossed in.
Пікірлер: 55
@musarapio_hha2 жыл бұрын
wayyyy to long?, dude this is gold, thank you for share some knowledge, about this.
@herrjugsracing78162 жыл бұрын
Glad it was helpful!
@nathanhughes9996 Жыл бұрын
Awesome video mate very informative and straight to the point! I really enjoyed watching it and has given me the motivation I need to re assemble my motor. Off to the shed I go. Thanks heaps 😁
@josephmanfredo78122 жыл бұрын
just bought a 4 mil kit, thanks for the knowledge and pointers... Can't wait to start moving forward
@herrjugsracing78162 жыл бұрын
Have fun!
@lexomotorsports5 ай бұрын
Awesome work Great company 👍
@herrjugsracing78165 ай бұрын
Thanks for the support.
@mikedahoe22518 ай бұрын
Thank you!!... Needed this
@Quaylokeepitg20 күн бұрын
Very explainable and eligible for me to be able to be confident to do it myself I like your channel and how you went about this way to go dude love it
@herrjugsracing781620 күн бұрын
Glad it was helpful!
@kellycampbell78012 жыл бұрын
I am new to your channel I watched a Lotta different ones I came across yours started paying attention and watching it you really know your stuff I enjoyed the video I will continue watching your videos
@herrjugsracing78162 жыл бұрын
Thank you so much!!
@kellycampbell78012 жыл бұрын
@@herrjugsracing7816 your welcome
@eyaylifestyle2 жыл бұрын
This really help me put my motor back together even with having the manual
@herrjugsracing78162 жыл бұрын
Glad it could be helpful to you.
@KensGarage12 жыл бұрын
Thanks for the video. Yep, it's long but very good. I am not all the way thru it yet but got a chuckle when you said to check for the case dowels. Just yesterday I assembled my RZ350 bottom end, then l looked over there, and low and behold what did I see? I took them out because it's a tiny bit easier to get the 1211 sealant on. So disassembled and reassembled again. Glad to see you are using 1211 sealant which is what I have landed on after several rebuilds.
@herrjugsracing78162 жыл бұрын
Glad you enjoyed it
@tB3o3tR9o9 Жыл бұрын
Best Video ever. learned alot. thanks for sharing.
@c0ulter2 жыл бұрын
Love your videos Kevin! Keep ‘em coming.
@herrjugsracing78162 жыл бұрын
Thanks! Will do!
@Parks7222 жыл бұрын
I get to see my motor build thank you Herr juggs
@larrywarner9314Ай бұрын
I put just a dab of grease on the seal and rotate the crank as im trying to install the gear it goes on a little easier
@larrywarner9314Ай бұрын
Now to be fair not all piston manufacturers sent ligature on ring gaps and other instructions, i personally can say im surprised i bought wossner piston kit for one of my snowmobiles and not instructions at all.
@herrjugsracing7816Ай бұрын
Oh wow, I haven’t run into that in 25 years.
@larrywarner9314Ай бұрын
All it is is a dust sheild , i take them out so it gets oil on both sides
@larrywarner9314Ай бұрын
I pressure and vacuum test every engine I build !!!! Chainsaws , snowmobiles, dirt bikes, any two stroke engine I build gets tested !!! Or I don't send it out the door
@dennisbrooks1862 жыл бұрын
I watch anything banshee related haha. Idc how long it is. I've played around with porting, 2 strokes, 450s, w.e. motor I'm on at the time. But with nikasil, I've yet to cut into that. U have cubs renicked after porting? Is there a certain kind of cutter to not chip the port edges nik? I refurb mostly banshees, want to port my 521 maybe.
@herrjugsracing78162 жыл бұрын
They can and will chip. Maybe I can film how I do it. Its way to lengthy to explain and would make an excellent video.
@dennisbrooks1862 жыл бұрын
@@herrjugsracing7816 nice man. Yeah 521 ain't one to practice on lol. I'm comfortable working sleeves. So u still use double cut carbide burrs? I need better tools. Foredom coming soon. Been using die grinding with 6" burrs but they hop around too much. Love the video man!!!!
@herrjugsracing78162 жыл бұрын
@@dennisbrooks186 Yes, upgrade those tools.
@marcelohang Жыл бұрын
next may be the assembly BLASTER 🙏🏻🙏🏻
@stephencrisson3595 Жыл бұрын
Marcelo right im a blaster guru to one of my favorite quads ever and this man can build a mean blaster🤙‼️
@georgephillips74082 жыл бұрын
I feel like the banshee motor is the best sounding 2 stroke out there besides the older Detroit 2 stroke diesels
@herrjugsracing78162 жыл бұрын
I call the banshee motor the 426 Hemi of the desert.
@raymondortiz322110 ай бұрын
hi i wonder why my clutch shaft wont go back as firm as yours??
@matthewalbone4975 Жыл бұрын
You need to clean up them cases I recommend vapor blast
@herrjugsracing7816 Жыл бұрын
I will pass it on to the customer.
@paullane74892 жыл бұрын
Great content! How much power could you expect(rough estimate) from a ported(street play) 4 mil on pump gas? I’m sure you are very busy, so what’s your turn around time on a full engine build? I mean something relatively basic that you do a lot of? Thanks for your time!
@herrjugsracing78162 жыл бұрын
70hp on pump gas and stock carbs. It takes a few weeks to build it out.
@paullane74892 жыл бұрын
@@herrjugsracing7816 got it. Sounds good. That’s pretty quick turn around in today’s environment of parts shortages. I’ll be in touch. Thanks for your time.
@matthewalbone4975 Жыл бұрын
I gotta a Athena 144 kit on my 98 yz125 it's a ripper
@josephmanfredo78122 жыл бұрын
Hey Kevin so I'm going to have about 85- 90 horsepower when I'm done building my 4 mil. I see that you cut "every other ear off", so that the gears engage easier or more efficiently. I would love to understand a little more why and how you achieve this mod. Again I appreciate your knowledge and time.
@herrjugsracing78162 жыл бұрын
Makes for a longer open time for the gears to engage. Its a must if you are in the 85-90HP range. If you really are at those numbers your Banshee wont shift at all. If it shifts fine you aren't making HP those numbers.
@josephmanfredo78122 жыл бұрын
@@herrjugsracing7816 Wow Great to know, thats what I'll be doing when I split the cases. Thank you So much
@josemaria-kx3cm Жыл бұрын
great video, ive noticed sometimes the stuff inside the flywheel its just dirt or sand and not broken magnets so you can clean it thoroughly and blow it off 👍
@gueromoreno4102 жыл бұрын
How can I get my cylinders ported by you?
@herrjugsracing78162 жыл бұрын
Send them to me, text me at 858-945-3622 www.herrjugsracing.com
@6GEARPINNED Жыл бұрын
hey man wicked video, but question, im doing a full build atm stock and my stock main trans bearings came out nice and back in but when i go to put my aftermarket ones in with those half moon clips it doesnt fully rest in the case i dont like that. i check bearings have the same markings on them only difference is they are aftermarket? any help would be awesome as im stumped here. Thanks!
@herrjugsracing7816 Жыл бұрын
Some of the aftermarket stuff doesn't fit right. You can modify the clip to fit or run different bearings. I have run into that before but get all my bearings from the same place now that fit correctly. If you stay away from Ebay and find a shop that knows Banshees you will bet in much better shape.
@6GEARPINNED Жыл бұрын
@@herrjugsracing7816 thank you for the reply! i acutally got a 3500 kit from bpatv surprised the bearings weren't a perfect fit? they also wont return or exchange the 2 that wont fit. so mod the half moon clip it is! thank you again! now i can keep building!
@KaNaE_koch-y8t4 ай бұрын
Por que la mia nomas. Tiene una. Estreya en. El. Piñon del. Sigueñal
@margotavares490 Жыл бұрын
Aye I was wondering did u say 340 main jet and 25 pilot ? Lol that's neew