Yamaha Blaster Twist Throttle Install step by step

[@FG2-K24A]

I found this kit on MotoSport.com. Here is the link www.motosport.com/motion-pro-cr-pro-throttle-conversion-kit

[@greecemonkey1313]

thanks for the video

[@FG2-K24A]

Glad to hear! Hope it helped

[@ewfabian]

My blaster came with a twist throttle, how do I change it back? I can’t seem to get used to riding twist

[@henryortiz8528]

Deos it fit the 2001 Yamaha blaster cuase the website says it doesn’t

[@FG2-K24A]

It should fit 2001

[@henryortiz8528]

So it asked me to put the year make and model and says it’s doesn’t fit for my 01 Yamaha blaster does it matter or it still work

[@FG2-K24A]

It should work for the 2001

[@connersnow298]

Nice vid

[@thesharmaboyz3919]

BTW how about the wire that was unplugged from the tors system... is it just left like that?

[@FG2-K24A]

You can zip tie up or just cut the plug off. I chose to cut mine off. I've been running this twist throttle for a while now with no issues.

[@angelledesma2596]

Do you have a battery on the blaster?

[@FG2-K24A]

No battery

[@billyaddelia4330]

Do you have the link or name of the kit ylu bought and where you Bought it from?

[@FG2-K24A]

www.motosport.com/motion-pro-cr-pro-throttle-conversion-kit

[@billyaddelia4330]

Thanks so much

[@StevenF1122]

what ended up being the idling adjuster for it, after the tors was eliminated?

[@FG2-K24A]

You will still be able to adjust idle on the carburator. TORS shuts the bike off if the throttle is stuck open all the way for a certain amount of time.

[@dabears22]

so im doing this to my blaster... you dont need that wire after you take that thumb throttle off? you can jus cut it and tape it up?

[@FG2-K24A]

Not sure which wire you are referring to but you could just leave it and zip tie out of the way.

[@dabears22]

@@FG2-K24A the one towards the end when u said to connect the two and just tape them up, the one that’s connected to the stock thumb throttle. thanks!

[@FG2-K24A]

@@dabears22 I just checked and yes I did cut the wire coming from the stock thumb throttle.

[@dabears22]

@@FG2-K24A cool sounds good. thank you 👍🏼👍🏼

[@FG2-K24A]

@@dabears22 You're welcome 👍

[@disinfecting7169]

Did you have to install idle kit ?

[@FG2-K24A]

No

[@duncandiving9748]

Delete that tors already bro

[@MUCKFOOT399]

why the F would you do this. why.