A general comparison of the 1988 Yamaha DT200 and the Yamaha Blaster YFS200 engines. Please like & subscribe!
Пікірлер: 60
@tegr1tyosrs3372 жыл бұрын
I'm working on doing a dt200 top end conversion on a blaster. The blaster bottom end has a better gear ratio. The dt200 top end will fit you just need dt125lc water pump parts
@kevins6698 Жыл бұрын
📝
@rickyfg17 Жыл бұрын
Great, I would like to the video went ever you finished
@fukthabank9 ай бұрын
can yu makes videos and post im about to start a build myself
@tegr1tyosrs3379 ай бұрын
Yeah I'll make vids I don't have sponsors so I'm doing it all out of pocket stuffs not cheap lol
@fukthabank9 ай бұрын
hey man im doin the same this is gonna be a garage budget build until I come across something I can't do alone@@tegr1tyosrs337
@morrow494 жыл бұрын
This is awesome!! Great video
@dannymiester58252 жыл бұрын
Thankyou for making this video. Very helpfull
@jessebrown90463 жыл бұрын
Great video, I just bought a 87 dt200lc today for 1500 in Ontario Canada, the complete bike, the speedo says 7000kms and the cylinder is stock bore, I own a 95200r 2yy as well, and a 06SE blaster, go figure
@peropero4691 Жыл бұрын
I am a Japan person. There are not many people riding in the Japan, and there is almost no information at all. This video is very helpful. If you're fine, I want you to make more videos. I want the YFS200 to have a DT200 engine. I was tired of burning the engine with air cool...
@Vitalogy788 ай бұрын
Thanks fkr the video. Does the blaster have the YEIS (the kind of expansion chamber on top of the intake manifold?) And is the jetting/carburator similar?
@matthew1er3 жыл бұрын
awesome video!. are the mounting holes the same? would the dt200 bottom end just bolt right up to a blaster?
@jessebrown90462 жыл бұрын
The DT200L swingarm mount is 12mm the Blaster 16mm, but the front mount is the same, I own a DT200L and a 200R, the DT200L engine is going in my Blaster I think
@ABEYY_3 жыл бұрын
I have yz125 frame..but i put DT200 motor on it..feel very2 crazy when top speed ..trust me
@jessebrown90462 жыл бұрын
is he DT200L motor quick bud? I own a 1987 DT200L and I just rebuilt the motor and a 200R 3ET, I want to put the 200L motor in my Blaster
@brachstrawder2373 жыл бұрын
So I assume there is a blaster project in the works! Would love to see a follow up video on the progress if there is one. I actually want to get a dt200 for mine but I dont even know where to look.
@jacobh73713 жыл бұрын
Facebook marketplace or ebay
@JamesDee113 жыл бұрын
ive just recently finished up a dt200 blaster, definitely worth it
@Kyle_gallegher2 жыл бұрын
Haters gonna hate but I swear yamaha was being very humble with their hp and tq rating on the blaster specs because it does NOT make sense how quick they are considered a blaster weight
@mrpowdercoater4 жыл бұрын
The only thing I could add would be the stator puts out more power due to the electrical needs of the dt200. Just can't remember how much.
@troybore99814 жыл бұрын
That is correct, I don't have the numbers though
@lukeannuzzi77992 жыл бұрын
Do you still have the dt 200?
@bikesandstuffwithjoe22152 жыл бұрын
Brilliant video. I am endeavouring to convert my dt200r from water cooling to air cooling. Will a blaster cylinder and head fit to my existing dt200r cases? Thanks buddy cheers
@jessebrown90462 жыл бұрын
I thought about putting my 240 Blaster motor in my 200R but it wont fit, I just built a DT200 Blaster this week, harness swap and all, I mounted rm125 rads and mounted the servo today, its a beast, I own a 200R and another 200L as well
@jessebrown90462 жыл бұрын
Dt200R in brazil or DT200R 3ET, the 3et wouldnt work unless you want 2 intakes, but the 37f or 4an would work fine
@fomaWeeD3 жыл бұрын
Love it bro if not is much problem do it with sub on Spanish plz
@juliomoraga7158 Жыл бұрын
Es compatible el cigueñal de yamaha blaster con el sistema de encendido dt 200
@nicolaskeis63523 жыл бұрын
a question is the crankshaft of the dt 200 the same as the blaster 200?
@jessebrown90462 жыл бұрын
The DT200L crank is the same bud, but the 200R 3ET is different on the primary side
@Venom102483 жыл бұрын
Do they have the same Size Reeds ?
@jessebrown9046 Жыл бұрын
No but the reed cages can be swapped between the 2
@98KingQuad3 жыл бұрын
Are the head and base gaskets different ?
@jessebrown90462 жыл бұрын
head gaskets different, base are the same
@littlelouievs3 жыл бұрын
Could you turn a Yamaha blaster engine into a dt200?
@trumps-a-hoe3 жыл бұрын
I dont see why not. You would need the top end, clutch side cover (with water pomp), radiator and the electronics for the pv I believe.
@rogerbeginify2 жыл бұрын
Where do you think the DT’s extra hp comes from ?
@satan101101 Жыл бұрын
Exhaust port I guess, bigger exhaust port for more power but still have good power and torque at low-mid end because of power valve This is just a guess,I’m not a 2 stroke expert 😂
@RubberSalt4 жыл бұрын
What is the port duration?
@petercarlboer27934 жыл бұрын
They're nasty fast
@troybore99814 жыл бұрын
Port duration would be the same as the blasters except the exhaust port duration would be varying with the power valve. I don't have the exact numbers.
@petercarlboer27934 жыл бұрын
@@troybore9981 and transfer port duration??
@troybore99814 жыл бұрын
@@petercarlboer2793 All port duration are the same as the blaster except the exhaust port.
@deborahchesser73753 жыл бұрын
Only the power valve moves so that’s the only port with duration. Do you mean port size and dimensions?
@serchm77273 жыл бұрын
hypothetically i could put a dt 200 top end on a ysf200?
@Kyle_gallegher3 жыл бұрын
Wouldnt u need a water pump still and radiator? Would try to get that whole motor tbh lol 32 hp stock maybe 40 with Reed cage and pipes and bigger carb
@trumps-a-hoe3 жыл бұрын
You can if you swap the clutch cover (from the yfs to the dt) and grab a radiator I believe.
@conniestevenson2263 жыл бұрын
@@Kyle_gallegher inline electric waterpump would work fine
@danialirfan88473 жыл бұрын
That yfs200 almost same look like a DT175 engine
@michaeledwards37363 жыл бұрын
Apples and oranges seeing as ones liquid cooled and the other air cooled
@gregeverett22902 жыл бұрын
it’s actually closer to the yamaha IT 200
@jessebrown9046 Жыл бұрын
The It200 sprocket is on the right side and different stroke I think, I buy Blaster pistons, gaskets, clutch basket and bearings for my Dt200l
@trumps-a-hoe3 жыл бұрын
About a 15hp diff lol
@joseluistijaro5244 жыл бұрын
You wrong on the horse power comparison
@mrpowdercoater4 жыл бұрын
He's not wrong, there are a lot of sites that state 32/33 hp.
@Trailcel4 жыл бұрын
@@mrpowdercoater for the dt200r (second gen) and this is the first one, i think.
@KatanaRIDERS.2 жыл бұрын
My father's blaster has 80hp
@jessebrown90462 жыл бұрын
bullshit, unless it has a banshee motor in the frame, or 2 240 stroker Blaster engines side by side