Yamaha MT-10 2022 - Frontal Wing Accessory!

Our latest addition for the second generation MT-10 is a new frontal wing! This one is 3D printed and similar in styling to the wing on the first generation.
Now available here: pyramid-plasti...

[@leetman5448]

Loving your works! But from personal thought, it does seems a little too small from the video. Probably a litter bigger and thicker, which follows/integrates the design line of the flyscreen and dual headlight would add more aggressiveness?

[@pyramidmoto86]

Yes it may well do - we had to stick with this size as the 3D print was starting to get expensive! If we'd have gone bigger then the RRP would have been too expensive for people so we decided to stick with this model.

[@leetman5448]

​@@pyramidmoto86 Ahhh I see! thank you for sharing this!😁Perhaps a possibility of version 2 in the future?🤭

[@yammt3148]

Can you guys actually make a full shroud for the headlights??? So many people want the previous gen's Decepticon eyes back. Please manufacture some, I'll throw money at you.

[@windyrun7979]

The bike definitely needs some kind of bulk below the headlights to offset the upper part. Or just replace the whole headlight assembly.

[@queenslander954]

Yea mate looks great , but looking at that huge curved expensive radiator while you’re filming* the wing makes people think , hey get some radiator-protection first before mucking around with wings .

[@pyramidmoto86]

Yes the rad guard is a tricky one - need specialist tools to achieve a curved rad guard like that which we don't have access to at the moment. Something we'd like to be able to do though for sure!

[@thecornishbiker9323]

Can you do a gen one face transplant for these .yamaha really didnt improve the looks.

[@motorjack141]

Do you have plans to make a front cowl for the headlight and a bigger “chin”?

[@pyramidmoto86]

No plans at the moment I'm afraid Jack.

[@motorjack141]

@@pyramidmoto86 thanks i hope someone can render a front cowl or something on these bikes.

[@chrissmedley3418]

what does it do

[@pyramidmoto86]

Looks nice :D

[@chrissmedley3418]

@@pyramidmoto86 ok seems pointless to me

[@pyramidmoto86]

@@chrissmedley3418 we kept getting loads of requests for it and it seems people were right, it sold straight out as soon as we launched it! People just don't like the lack of wing vs the gen 1 it seems, same job with the infill panels.

[@stevecade857]

Gives 2 kg of downforce at 150 mph to help keep the front wheel down leaving the bike meet.

[@pyramidmoto86]

🤣🤣

[@windyrun7979]

I noticed you removed the MT-10SP lettering from the air intake scoop. Was it a sticker that you were able to get off with a heat gun or was it painted on?

[@pyramidmoto86]

Yes that's right, applied a bit of heat and it came off no problem! Looks way better like that we think :D

[@888jackflash]

Uhhh.. okaaaaay... how about making some blades or vectors to reduce the wind roar?

[@pyramidmoto86]

Yes for sure... where do you see these being fitted?

[@888jackflash]

@@pyramidmoto86 My FJR 1300 had BAD wind roar. I experimented with windshields, and then as an experiment, tried sticking on a few very small triangular "vector" pieces, the kind that people put on the back edges of their car roofs. I placed two on each side, on the painted fairing, just under the outside edges of the windshield (screen), pointing forward. It helped a LOT. The wind vortex is actually loud because there is a large VACUUM coming UPWARDS at speed, and it causes a roar at the helmet edges.

[@pyramidmoto86]

Very interesting... could you send us some images and examples of where you see these parts fitting?@@888jackflash

[@elvisthewart670]

I have the 22 plate mt 10 cyan storm i think ur works great but im struggling with this last piece u have produced i dont think it adds to the bike just my personal opinion im not putting you down in any way.

[@pyramidmoto86]

Fair play Elvis, each to their own!

[@user-ux5jx3lk1f]

Any plans for it to be colour coded Cyan

[@pyramidmoto86]

Unfortunately not, because it's a 3D print it's difficult to paint! We think it's probably possible in small numbers but our painter has refused to do them in batches due to the much greater prep work required.

[@user-ux5jx3lk1f]

That’s a shame I would have had one

[@Bugside]

yeah, she needed this, would you consider one for the mt09? the puig one looks too much like a mustache unfortunately

[@pyramidmoto86]

It's one we will look at again for sure :D

[@Paulthenutter34]

Bought one, fills the gaping void beneath the headlight! Thanks Team! That said, the wing on the bike in kzbin.info/www/bejne/hYbRhX9jdr-Fh8k has a more appropriate size...

[@pyramidmoto86]

Yes we had to keep the size down due to it being a 3D print... they start to get pretty steep as the prints get bigger!

[@umaraziz7823]

How bout wings on the infill panel? I would get it! 😄

[@pyramidmoto86]

Now you're talking Umar, I'll tell the designer to get the wings back out 🤣

[@CRB81]

Haha 😂 Wings on an MT10, It’s not fast enough for them, hence why they never came from the factory with them on.

[@pyramidmoto86]

@@CRB81 rotate at about 170mph and wave good bye ;)

[@albertothaddeus3591]

promo sm

[@helgejohan3604]

Hate wings😩

[@pyramidmoto86]

👹