You may have another brand but many of the connectors are the same. If I got anything wrong please let me know. I hope this is helpful to you.
Пікірлер: 66
@muebelhack5 жыл бұрын
Still love my Cassettes Tapes which I use to preserve my LP collection. Play the Record once and record it to tape and then listen to the tape; especially in my car and motorcycle which still have tape players.
@jggallow015 жыл бұрын
It's my understanding that the HDMI - Out port on the Yamaha RX-V3800 is NOT ARC compatible. The technology was not around when this receiver was produced, nor have any firmware upgrades converted the connection to ARC compatibility. Since the RX-V2700 is older than the RX-V3800, this would confirm the 2700 HDMI-Out port is also NOT ARC compatible, as the narrator suggests..
@brianr9876 жыл бұрын
Pre out is for additional amps as well. You can take the load off of your receiver and just use it as a controller. It’s easy to build a powerful system by using multiple amps this way. With a 7.1 system you can have an inexpensive amps for your back speakers and another one for your front speakers. Maybe use the receiver for the center channel. This way you don’t overload your expensive receiver.
@Chauhan_sir2 жыл бұрын
V
@phaenius6 жыл бұрын
Nice video, but with a small correction. Those little black, round sockets, with 4 pins in them are S-Video, not S-VHS, which is something else. It's true that you find those plugs mostly in S-VHS machines, but the name is S-Video.
@anovosedlik5 жыл бұрын
Thank you so much for all the help! Awesome vid!
@brockdavidson21307 жыл бұрын
Great video. I enjoyed watching this.
@travisgulley26525 жыл бұрын
A record player or a turntable plugs into the phono input on the back of the receiver plugging other devices into the phono input however could potentially blow your speakers though
@RogersPhotographyGuilford5 жыл бұрын
Excellent coverage! Thank you.
@izehumaheyiba21823 жыл бұрын
If u have Camcorder video digital camera 30fps & 720fps.
@jimclayton58057 жыл бұрын
Hi, I just replaced two RX-V377 Yamaha Receiver/Amps and have tested and confirmed the problem in both cases is the HMDI cards. While using one of the bad HDMI cards neither of the four units will power up. Using a good HDMI card and all four units work perfectly. Notice, "power up" is the issue. The power supplies to both "suspect units" tested perfectly. From Yamaha, a new HMDI card is $169 and I ONLY paid $80 for the two complete units on ebay. Here is my thinking: 1. The "protection" circuits on the HMDI cards are not allowing the power supply to engage. 2. The vendors who sold me the replacement (Used) units likely had the same problem (Would not power up due to "a turned off HMDI unit" by the protection circuit). 3. Using a magnifing glass and good light, all four HDMI cards look exactly the same. QUESTIONS: a. How can I find a vendor/repair-place to repair the two inoperative HDMI cards? b. How can I sell the two good amps with inoperative HDMI cards for $40 each plus $12 freight? c. What other suggestions? I can use the two inoperative units if the HDMI boards are repaired. I appreciate. Jim.clayton at Claytonbank d--com. Thanks!
@cedrict9390 Жыл бұрын
superb instruction vid. thank you
@florenciomendez55296 жыл бұрын
Very helpful, thank you.
@travisgulley26525 жыл бұрын
But the subwoofer pre out has a low pass filter built into it which makes it to where any amplifier hooked up to it will only receive low frequencies so therefore you can only hook subwoofers up to the subwoofer pre out speakers that can't handle the low frequencies will blow if they are hooked up to the subwoofer pre out speaker pre outs don't have a low pass filter in them though only the subwoofer pre out has a low pass filter
@davidseng9396 Жыл бұрын
How is the USB front port work? Thanks
@LEDFOOT49 Жыл бұрын
How do you connect an equalizer?
@alexandertorres58092 жыл бұрын
How You conect a equalizer to this unit RX-V2700? Please let me know tx.
@babybird8718 жыл бұрын
I have an older Yamaha receiver similar to the one above with two HDMI inputs and one HDMI output. Everything is marked DVD...DTV...etc. The HDMI inputs only have numbers (1 and 2). How do you distinguish and select from the remote?
@mikegil1076 жыл бұрын
taht was very helpful, thank you !!!!!!! one quiestion, if you plug in a 1080p source-device like media player and just start watching a movie on your 5.1 set up, does tha yamaha pass throught the full HD signal or it douwnscale to 720p?
@robrando90234 жыл бұрын
Hello, I have a Yamaha RX-V459 w/ the XM connect & Play capabilities. I purchased the XM antenna through Sirius XM but the factory jack on the antenna does not match the port configuration of the receiver. The port looks exactly like the one you demonstrate in your video. Do you know if there is a converter out available or have any suggestions?
@scoantv5305 Жыл бұрын
Hi There, I would need your help to set up my Onkyo TX NR 6100 brand new l got it as a gift 4 years ago and never got to use it. I would need your help to set it up with my Bose Acoustimass 3 Series IV Speakers that have both the input that comes from the amp and the output that goes to the cube speakers at the back of the sub. I have two sets of the Bose Acoustimass 3 Series IV Speakers and would like to use the front and rear speaker output of the TX NR 6100 like an integrated amp for playing music as well as watching my cinema. Thank you for your help. Michael
@obichitimothy20766 жыл бұрын
we have seen the speaker output what of the A .V and control buttons
@SaqibKhan-du2bz5 жыл бұрын
Let me tell you bassicaly monitar out option . Define how can i attached led to my marantz sr 4200 for sterio settings
@Nu8S4uc310 жыл бұрын
Just curious about connecting the out wires to your speakers. What happens if you have speakers who's RMS rating is different such as a mid range driver who's RMS rating is 50 watts and a tweeter who's RMS rating is 25 watts. How does that affect the wiring of the receiver or does it? I'm nervous about blowing a speaker when turning the volume up significantly. Any help you can give would be much appreciated! Thanks
@wendylacrosse21379 жыл бұрын
The Receiver automatically adjusts to whatever RMS rating your speakers are, a Great Yamaha feature,don't know about other receivers because I only have Yamaha brands
@ob_juankenobi22899 жыл бұрын
I cant get my hdmi plugged into the inputs to play on the TV plugged into the HDMI out... any thing i can check?
@liwaywayage857510 жыл бұрын
thanks!
@Dankzzz5 жыл бұрын
Do you know if connecting Coax and hdmi to a disc player BD will degrade the max audio signal in hdmi?
@The__Outlaw5 жыл бұрын
My computer Doesn't have Bluetooth ... And I have my PC plugged into HDMI Port one..... And I want to make this Bluetooth , for my Bluetooth headphones. I just purchased a Bluetooth Receiver, And I don't know what port to use .....What input would I plug into?
@wlms048 жыл бұрын
If you plug the HDMI into the reciver, how do you get it to the tv for video? Do you use the HDMI out?
@chrisellertson33528 жыл бұрын
so has anyone dealt with this model and the volume dial orange light has begun blinking and no function no sound but powered up. Any thoughts? Fuse internally perhaps.
@EnchantedNighbird7 жыл бұрын
plz help. hav the Yamaha 679 & we hooked all this up on xmas. took wk 2 figure out ARC , was working for a wk or 2. the streaming audio from Samsung tv smarthub. it works out of tv speakers. so is receiver. I have Arc/hdmi all on. am updating firmware again. had 2 from start 4 it to see 5 ghz WiFi. i even tried manually inputting.... nothing found.. Most important now is Audio from tv... all strange. so connected to 2.4. ! Am sooo frustrated! Don't know enough about all this.. the streaming from BD is fine. but doesn't have the apps i WANT to use. plz help. how to reset? or? ive watched your video & everything I can find pertaining to thid model! unable to get Bluetooth to connect again as well.
@chaimm54572 жыл бұрын
Can I add a microphone to the receiver ?
@PackedFunk6 жыл бұрын
Great video. Do you prefer Yamaha receivers?
@davidewhite694 жыл бұрын
just a small correction, it's S-Video, not S-VHS
@bradwillis22742 жыл бұрын
I have come across a RX-V1900. Would appreciate any advice out there. At the moment I run my audio output from my pc to an aux on a old stereo. I was wanting to run my pc audio direct thru the Yamaha to my existing stand alone 8omh speakers is this possible or do I have to put back stereo and send that audio to the Yamaha?. Thanks in advance for help
@geraldslonaker32892 жыл бұрын
Brad...there should be no reason why you can't connect your PC audio to the Yamaha RX-V1900. What kind of output are you using from the PC?
@enricobabael96425 жыл бұрын
Hi sir can I have a suggestion can I connect my mixer yamaha mg10xu to my Yamaha amplepier pls can you help me
@obichitimothy20766 жыл бұрын
can you separate it
@Foxstang4life9 жыл бұрын
How's it goin , I just picked up a yamaha rx-v3900 and i was wondering if I can use it as a 2 channel stereo and if running 2 speakers where do you hook up the mains ?This is my 1st surround receiver , im more into the solid state 70's gear but I couldn't pass this up for the price . Thanks for any input
@nickfatsis96074 жыл бұрын
I'm not sure if you solved your problem or not, you did post the question 5 years ago, but yes, you can use it as a 2 channel amp, the mains gets plugged into the only socket that's there.
@brianr9877 жыл бұрын
The wire gauge for digital RCA jacks makes no difference. Just like gold plated Ethernet cables are a fraud.
@alexandertorres58092 жыл бұрын
I conet HDMI OUT TO MY TV DIDN'T WORK!!!
@Wangan_W7 жыл бұрын
What did you use to find out if there's power going through the wire?
@guyfamily116 жыл бұрын
Voltage detector
@orlandocostadasilvasilva12042 жыл бұрын
qual é o peso do receiver
@judgedredd88762 жыл бұрын
16-17Kgr.
@novianfristanto52495 жыл бұрын
Thanks for your video share...I would like to ask you about subwoofer..in a time of your Video (7:00).. Subwoofer must an active subwoofer..is it right? Coz I have subwoofer, but when I plug in...I can't hear sound out from it.. Thanks from Indonesia ☺️
@bellanewler66112 жыл бұрын
For 2 channels music, I don't think the sub will work; no audio signal For 7.1, the active sub should get sound.
@novianfristanto52492 жыл бұрын
@@bellanewler6611 okey..noted thank you for your explain 🙏
@Shafy75 жыл бұрын
This player doesn't support HDMI Arch?. I have tried and it's not working. Anyone has any luck audio via HDMI? please can you assists?
@robertmekemson123 жыл бұрын
Yeah, I am pretty sure this particular model doesn't support arc. However there are settings in your tv sound output that should be verified. You have to enable arc on your tv and turn on arc on the receiver with the hdmi output connected same cable. I would think it should also work in one of the hdmi inputs on the av receiver as long as arc is enabled from the tv but it may not.
@Shafy73 жыл бұрын
@@robertmekemson12 in my sony tv I have a arc output on HDMI 3. But in my receiver there is no arc option. There is only HDMI audio option only.
@robertmekemson123 жыл бұрын
The work around which is not optimal, is an ARC hdmi audio extractor, by Tendak (probably other designs as well.), hdmi arc in to adapter from tv, then optical spdif or digital coax rca line to your av receiver. This will work. You may have to adjust settings in your tv sound (arc enabled) as well as pcm or other. Make sure hdmi cable is 2.0 or arc two way compatible (Mediabridge makes great cables). You could also as a last resort (If your TV has a headphone jack) use 3.5mm mini jack to RCA stereo cable adapter (a 90° 3.5mm miniplug would work best) into the receiver. (Probably will not pass 5.1 surround.) but you will have better audio using your av receiver. I was hoping as stated in discussions below that Yamaha would have a firmware update for this receiver to correct for ARC and some of the XM bugs, but they moved on. The RX-V2700 is a beast of a receiver, really love it but now it is old tech.
@Shafy73 жыл бұрын
@@robertmekemson12 hi Robert. I bought an HDMI arc adapter connect that to the to the TV and the receiver but I am not getting audio. Can we chat via email or Whatsapp.
@robertmekemson123 жыл бұрын
@@Shafy7 Well, not knowing your TV and the setup I can give you a couple of ideas that may work for the ARC adapter. Make sure your tv is recognizing the adapter, it should show in the device section or as an input source. Also, check via your headphones if there is audio getting to the adapter. If none, cycle the power to tv/adapter. I actually reset my tv sound settings (Which is an older Samsung). Not sure what to do if those don't work other than the following options. I am sorry for this and sometimes these electronic gizmos only work in certain configurations and with newer tvs. If you are not using your digital optical out from your tv plug that into your AV receiver. If it is already being utilized your 2nd to last resort, get a powered spdif/toslink splitter, this will allow you to send the digital optical signal to your receiver and your sound bar. (I actually had this configuration for many years before getting the ARC adapter.) Only drawback is that your sound bar may not go into standby unless you manually turn it off if you have one connected. Last resort (If your TV has a headphone jack) use 3.5mm mini jack to RCA stereo cable adapter (a 90° 3.5mm miniplug would work best) into the receiver as I stated above. This is about all I can recommend. I am sorry if you don't get the ARC to work but the last two are not optimal but options. What a pain huh?
@MKELECTRONICSEST20235 жыл бұрын
0:34 ac outlets
@paven988 жыл бұрын
This receiver does not have ARC.
@ChrisHitch7 жыл бұрын
I would expect the TV's ARC to go into HDMI IN1,IN2,IN3 where the TV is driving both audio and Video and no display signal is needed to pass through the receiver. All Audio comes from TV through on receiver's processing/amplification with variable out driving the volume via the tv. The HDMI OUT would display video only as the receiver is carrying the Audio duties and presuming they are output via the speakers connected to the receiver. If you want the TV to play processed audio through the on board tv speakers (Cause you must hate quality audio lol) then I assumed you would send it to the TV sound in via (Digital Out 8 MD/Tape or 9 CD-R) or more likely paring an analog RCA out to a video input where HDMI is video IN and the audio arrives via another connection type (not HDMI) or some other analogue connection. HDMI ARC would allow audio to come from the TV or to The TV via the HDMI Out connection. Where video switching on the Receiver or the TV would not be necesary you would stay on the HDMI ARC Channel. Do I have that right?
@CamGTS7 жыл бұрын
Found this video trying to get more info on using ARC from my Sony 4k TV. As per this comment and reply, it seems odd to run ARC output from TV To HDMI output on this amp (same as mine)?? Anyone successfully got digital audio from ARC TV output to this amp? It would solve my 4k switching issues and save me buying a new amp!
@Shafy75 жыл бұрын
@@CamGTS any luck.i am facing the same issue as well.
@curtisvalle51413 жыл бұрын
I laughed most of the way through but all other commenters were awe struck. ... ? Lots of weak defns, a few mistakes and a "most people don't use these" jacks. Good try :]
@judgedredd88762 жыл бұрын
No mentioning of the 5 optical ports, either. Odd.