Yard Sale $400 Toro Zero Turn Mower. Sitting For 10 years.

[@mintss1116]

Mustie I’ve been watching you for years I can’t explain the amount of stuff I have learned from you about motors and just everything thank you

[@Chr.U.Cas1622]

Dear Mints S. You mean engines? 😂😁 Best regards, luck and health.

[@HunterTalksWeather]

Same here man, my neighbor has been into the small engine bizz for about 40 years and is finally getting tired of it, and i am lucky enough to be able to take what hes gathered over the years and be able to pass it down to others. this hobby is so fun because when you work on something for 2 hours and you finally hear it run after not knowing how long it had been. its really satisfying, Have a good day man!

[@zonenuke]

I second everything you just said!

[@mintss1116]

Correction engines haha

[@zonenuke]

Nope he was right in saying motor's that's what we say in England

[@stevew270]

Ole Mustie never mows his yard with the same mower twice!

[@hunter7476]

paul beenis me too but my main mower is a John Deere gt245 I sometimes use my cube 1812 or the red 582 or my simplicity 4211 or my snapper vibragevridibg mower or my John Deere 68 rear engine riding mower good stuff

[@tomtheplummer7322]

I use my neighbor’s mower...and his Sons. Gave them a mountain bike and R/C gear. Tried to pay 💰 them. The father won’t let them accept it.

[@leeharris3061]

STEVE W..me either...i haven't used my own mower in years cuz i fix other peoples mowers and snowblowers...gotta test them out before sending them back to the owner

[@mdorf61]

LOLOL ! Amen

[@jay.wright4920]

😂😂

[@SulimannSaga]

@Mustie1, thanks for all the videos! I'm 45 years old and I have never been in to motors.. But for half a year ago I decided that I want to be able to repair machines my self. I have looked at all your videos of small machine repair now. And now I have repaired 2 lawn movers, One mini quad and bougt my self a non working MC from 1947 and taken down the whole engine in parts and together again. So thanks very much! Best regards from Sweden

[@mustie1]

That is awesome!

[@NicholasWarnerDC]

I too have learned much. Due to being better educated, my cussing during projects have gone way down.

[@beakittelscherz5419]

Same here! I startet to repair my piaggio scooter myself and be confident to give my mower a basic service. I enjoy how you explain how to diagnose and check most possible issues strategicly. Thanks and Greetings from Germany to Mustie! beathecarpentiere ;-)

[@geraldtakala1721]

Run??

[@PaganWizard]

I swear, you always manage to get the world's best deal, on the items you share with us. I sure do wish I had even half of your luck in finding stuff like this.

[@wallyklw5]

Love you attitude. I’m swearing less now and throwing less tools now during my repairs. You’re the best fix it guy on KZbin

[@ImTheJoker4u]

South Main Auto helps too.. Son of a biscuit lol

[@mikespain8655]

I used to get upset working on projects. Instead of giving yourself a clear head, it seems to make matters worse. Have some fun with a challenge, learn, and be patient. It usually all falls into place with time. This is what I have experienced.

[@YukonHawk1]

@@mikespain8655 well said👍👍

[@jimmynail3291]

@@ImTheJoker4u What's up !?.

[@Whbrown417]

Zero turns are so expensive nowadays, so getting that toro for 400 is a steal in my opinion

[@robertheinkel6225]

I bought my Toro ZTR about five years ago, thru Home Depot. It was only $200 more than the Toro tractor with the same size deck.

[@Boemel]

living in belgium everything that comes on this channel is a "steal" anything used or second hand still goes at a premium price

[@donabele1243]

That mower sells new for about $2700!!!

[@lordred7462]

@@donabele1243 company that I work for sells them for 10 000€ new!

[@jC-kc4si]

10,000€ for a zero turn? You can get a new sub compact car for close to that price.

[@michaelamato1431]

I am really getting to like these mid week Mustie's.. Especially on a rainy morning...Thanks for the bonus vid..Keep them coming..

[@2theslasher]

Mid week Mustie fantastic

[@MrLangDog]

Hell yeah!! A bright spot in the mid week lineup!!

[@chadsimmons6347]

Wow he got a mower to run that had been barely used..BIG-DEAL!

[@scottchapman9931]

@@chadsimmons6347 I never believed these stupid videos I should stop wasting my time with them

[@humbertpadua3365]

Kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk99q6

[@chrisnorton2837]

Real nice mower! Brian is lucky to have a good friend like you!!

[@HeavyHaulKen]

That mower looks like it was only used once....great find!

[@julieb9215]

A few years back I got a free used mower that needed the carb cleaned. It was one of those that requires a thin wrench. I’ve always kept odd little tools that come with things like furniture you put together so had a thin wrench but it wasn’t correct size so I filed it to the correct size! Later on I saw a pack of a few thin wrenches at Dollar Tree & I grabbed them just for such issues. After I watched the scooter video, I texted the link to a friend in her 70’s. Just wanted to show her how neat it was but really didn’t expect her to watch. Way later she finally replied & said she had watched half of it so far & it was interesting! When she was married & raising her kids her husband would sometimes request that she help him with something he was working on on a car & lets just say it was not a good experience for her. So she never imagined she could enjoy watching a mechanic work & maybe even actually learn a bit in the process! 😊

[@JT-tz5hp]

I woke up this morning thinking to myself. I wish it was sunday right now so I could enjoy my coffee with a Mustie1 video. I opened up youtube and bam! There was a new Mustie video had just been uploaded 9mins before! Love feeling like I willed a video into existence haha.

[@mustie1]

Good morning!

[@hankthebugman]

In my city of MIssissauga, Ontario, Canada...we used to be able to bag grass clippings and the city would pick them up weekly, make compost and then sell the compost. Great service. Now, that service has been discontinued. We are all encouraged to simply cut the grass and leave the clippings to degrade back into the soil. Given most mowers use mulching blades, this actually works well. Once we got over the city taking away a service we had grown used to receiving, it is actually an intelligent policy to have implemented.

[@MJorgy5]

This thing was an absolute steal, even if it needs a tire.

[@zyspan]

Beautiful Bison - it's always worth waiting to the end of your videos!

[@Thoridin58]

Yeah. Mustie1 is now making nature films "See the dominant male run off the younger one"

[@Deer-Run-Farms]

Nice to get an easy one every once in awhile! They are great little machines for a home owner! I'm sure Brian will definitely appreciate having it! Sure beats pushing 2 acres!

[@mfinite689]

Mowing a few acres with a push mower? Mustie, you're a true friend indeed! I'm surprised they haven't had a heart attack yet.

[@tomtheplummer7322]

My Pops used to have his house and the next door lot. At least two acres and hilly in spots. We had two push mowers. Seems like after we finished mowing it was time to start again. 🥵

[@navvet4518]

The slo mo dismount, I truly expected a face plant or something painful. It’s nice to have something easy to fix once in a while. Good vid.

[@Jammed_Toast]

This channel is showing up at your buddies garage, cracking a beer, watching him or her work on their broken thing and being thrilled it's not your thing that needs to take you to work in the morning.

[@pneumatic00]

The fuel cutoff is directly connected to the beverage holder.

[@Deer-Run-Farms]

Lmao best comment nomination! Gonna have to tell my wife this when she asks why I stopped mowing!

[@davidwillard7334]

NO !! IT'S !! NOT !!! A !! BEVERAGE !! HOLDER !! THATS !! THE !! TOOLBOX !!!!

[@mosconi0359]

Another great Mustie score! $3,000+ mower (hardly used) for $400. You are definitely 'da man!

[@Foxonian]

My brother has the same Toro zero turn lawnmower. For years, he's been trying to talk me into getting one. But, I can't give up my old Cub Cadet tractor since its so reliable.

[@kevin9c1]

I'm a simple man. I am a sucker for a steering wheel.

[@rawr51919]

Just run it into the ground so many times it can't anymore

[@Deer-Run-Farms]

Who says you gotta give it up? He who dies with the most toys wins my friend! LOL

[@blackholeman]

Don't give up reliability.

[@martinmarrero3996]

Enjoy watching these old videos, thanks mustie 😊😊

[@MWestern-m4g]

I used a side patch for tires. Worked till they were dead. Trick is to clean and grind the top layer off the inside then glue then dry then apply the patch with a roller wheel

[@fishlovme]

Good deal for 400 bucks. Great condition, very little found wrong with it. Nice find!

[@TimothyHigdonHiggs]

I have the same Toro. I clean the plugs every oil and clean the gas.

[@roger4375]

There was not much wrenching going on. Every now and then an easy fix comes along and it is an “IN & OUT fix. Thanks for sharing alway good to watch..

[@eronwebster1350]

Deflate the tire after you glue it, otherwise it blows the glue out. I've had good luck with shoe goo as well. Hope this helps. Love the videos!

[@mikemcguire8351]

Yes on air, but I would try a patch. Idk. It's just my opinion.

[@rlsingle00]

Garden looks good. You were very lucky in that fix up. The buffalo are also fun to watch. Thanks for sharing with us. Take care.

[@akersjon278]

LOL! That tire monologue was classic Mustie! All alternatives EXCEPT just simply buying a new one was considered....

[@JamesTaylor-cy1ku]

You are an inspiration not only in your skills but you make me laugh. Thanks. wah wah wah.

[@leedress2187]

thanks for turning me on to Vice Grip Garage. that dude is hilarious!

[@tomtheplummer7322]

I concur. The four post Lift episode. I binged all VGG vids after.

[@borisbash]

Just finished watching all of his videos. Another good one is Andrew Camarata. He does excavating. Doesn't sound great but you cant stop watching. He has also built a house and workshop out of shipping containers. Great channel.

[@131dyana]

I learn something new from you each time I watch. Thank you.

[@vwnut1967]

Great find for sure Sir. Thanks again

[@julieb9215]

vwnut 1967 Brian you could have said hello to us before you started your cutting grass! 🤪 Since you have a mower with a bagger you can start some good compost for your garden!

[@kdogg82]

Thats a damn good buy for 400 bucks. I work at the Toro plant in Shakopee, MN. The quality in this plant is up to the guy making the part. And a 2nd quality check is performed by QA. ALWAYS!!!!

[@spooncarvingwithtom]

2 in one week thanks Mustie, they are my favourite videos on KZbin :)

[@rsprockets7846]

Mustie OD...like the good ol. Days

[@raymondcaylor6292]

Looks like a very well designed machine.

[@mikesbarn1858]

FYI I have a zero turn with an enclosure around the engine. I installed pipe wrap on the exhaust manifolds and muffler. Dropped engine compartment temperature by 20-30 degrees.

[@ImTheJoker4u]

Great tip. 👍👍

[@Deer-Run-Farms]

Good idea! I use the header wrap on my racecar never though to put it on the mower. Will definitely lower the air temp also help with keeping it catch fire around the exhaust and muffler. Ok I'm headed to the garage now! Lol

[@audiotechlabs4650]

Hump day Mustie! Can't beat it! That's the way power wheelchairs work. Even the battery terminals were the same. Love from NW. Thanxz

[@LEGEND-ho6qb]

Love the vids I am 12 and have a go kart and want to fix more!!

[@Deer-Run-Farms]

Good to see young men like yourself are still out there! Most kids your age have no interest in fixing anything. My two boys love working with me in the shop. My son started learning with me around 4 or 5 years old now today he can weld rebuild carburetors rebuild a small engine along with alot of other stuff. Now at the age of 11 we have started building his first car for him when he turns 16! My advice is when your out and you see an old lawn mower or something with an engine out in the trash bring it home and take it apart and experiment see if you can make it come alive. Start with something that dont matter so if you mess up it's no big deal! Follow your dreams young man if you want something chase it! Also your soon going to be in high school in a few years look into tech school! Not sure if its offered in your area but it is a very good way for young men like you to learn how to work on things and learn a very valuable trade! Many different classes that give you the opportunity to learn alot everything from diesel mechanics to welding, auto mechanics, autobody, and the list goes on definitely something to look into! But for now follow your dreams!

[@beakittelscherz5419]

you go man !

[@carstrucksntrattors3070]

Same but I’ve got an old gator that I’m putting a jet ski engine in

[@RANDALLOLOGY]

You are beyond belief with that mower. It didn't have any of the problems that you were accustomed to getting. But you did get one hell of a deal.

[@jefferyholland]

Watching you ride that mower around made me think of Benny Hill.

[@leedress2187]

I thiught the exact same thing..

[@robertgrant4501]

How about the guy in the raincoat riding the tricycle on Laugh In?

[@Percival3Smithers]

I have owned the 52 inch version of this mower for 6 years and it was 11 years old when I got it. It is great and bullet proof, has a 19 hp Kawasaki motor. Thanks for the great videos, I watch every one that I can.

[@j.w.3345]

After Brian cut his lawn, he now has a new name....Dusty1.

[@kevinritchie9227]

I have that same high dollar sod in my yard, too. Eats up 2 or three sets of blades a year.

[@richardcline1337]

I have that same problem. At east two, sometimes three sets of blades every year. If I'm using the mower with the bagger attachment I get a real workout taking those bags off and dumping them because they are so full of sand. Who needs to waste money on a gym when you have a yard like mine?

[@vetterfellow]

Who's Brian?..

[@markhall3434]

I have an SW4200 Toro.. Love the Steering Wheel.. Bent the deck, but fixed it, welded more steel. Big Spindles, Super Air Flow thru deck, Big Starter issues, Rewired most everything.. Rear Bagger, Big rear Tires.. this thing will go nearly anywhere, and does side hills superbly.. Hydrostatic is SOLID

[@markhall3434]

Got sick of all the interlocks.. the parking brake module got replaced as well. Got sick of it.. wired around things as they failed or were suspect.. How many starter relays have I been thru? Starter kept getting stuck between poles, so I leave it just a tad loosely bolted down which seems to work so far. Some clearance is just a tad too tight.. The Deck is very Weak.. the welded deck version would be much better structurally but with an even far WORSE Air Flow Design.

[@sonovoxx]

So, we need a Mrs. Mustie1 gardening channel now... ...I know my good lady wife would tune in!

[@dennisjohnson5754]

Nice machine beautiful.

[@gord7025]

Maybe she can take the FJ Cruiser out for supplies so we can see it again

[@randybrill5071]

You have got to be the luckiest guy I know finding something like this. I got my hands on two MTD one I just have for motor the other for trying to cut my small yard can’t walk or stand for any length of time. But spend more time working on it to even cut my little yard. This thing you just got would be prefect.

[@Shockedbywater]

43:29 Really nice to see that your back is doing good.

[@tomtruesdale6901]

Great job on the resurrection of that Z-turn. Looked like a bad battery and the blade were the biggies. Remember "Don't pet the Fluffy cows"

[@Jedda73]

$400!! Im currently shopping for the exact same mower here in Australia, and a 2nd hand one sells for around $4k to $6k AU and a new one is over $7K!

[@marcryvon]

In Canada too. Sadly.

[@freebird7328]

I would like to musties friend

[@patmx5]

Yeah - you stole that thing! It looks like it's practically brand new.

[@scottdarling8024]

No complaining here. I’ve loved all your vids. Excellent content I’ve learned a lot. Cheers!

[@bc65925]

I bought and older model of the "Time Cutter" just to get me through one season so I wouldn't have to buy a new mower in the spring. I've had to weld it up all over for being worn out but it's still cutting so I use it for the rough part of the yard so as not to tear up my new one. I had to change out a blown head gasket. The drives are sealed units, I asked a dealer about the life time and he told me he had never had one returned with an issue in the drive units other than a belt issue. The first few times I mowed with a Z turn my hands were worn out from holding on but after I got used to it that went away.

[@timjohnson67]

Thanks for another mid-week treat especially here on a rainy UK afternoon. You got a real bargain there but I detect a slight disappointment that it didn't give you much of a challenge. Thanks again and stay safe.

[@imouse3246]

"Why didn't you tell me?" Because you never listen!!

[@ebutuoyebutouy]

Lol! Yup, I was also yelling.

[@28YorkshireRose12]

Actually, it's quite nice to see a machine that's easy to fix. It proves that it's not always crap, or scrap, that comes available. I'll admit though, the bad ones can be more satisfying, and more fun to tinker with.

[@philmerrifield1163]

16:00 you gotta get it wet first 😜 I ain't gonna lie my mind went straight to the gutter keep up with the brilliant work always a pleasure watching you work stay safe and well dude

[@garyborgquist2913]

I look forward to every video. You do a fantastic job. On those old tires, dry rotted, rim leaks, small seeping leaks, may I suggest you lay in a supply of TireJect. Unlike the many "popular brands" this stuff just works without fouling up the insides of the tires or the wheels. As a last resort, used TireJect on my dry rotted, rim leaking, and eventually un mounted tires on my 1996 Craftsman tractor with all flats, that sat 4 years in a dirt floored shed. The machine isn't worth the even the cost of tubes. I'll be darned if they sealed up and have remained fully inflated over a year...still in the shed.

[@Ceagon]

"Not that I don't suspect that it shouldn't" was the most complex way I've heard someone say "it should"

[@beakittelscherz5419]

fuckin lost in translatiion... lol

[@jerrybrown7411]

I really appreciate these videos. This one specifically saved my brother and I multiple hours of trying to diagnose my sisters lawnmower. She told us what it was doing and we immediately went to see if it had a float bowl solenoid valve and sure enough it did. We clamped off the gas line, pulled the solenoid, turned the key and it did nothing. We told her to buy a new one because we did not have the tools to "fix it". She ordered it, her husband put it on and it fired up immediately. She thinks we are the smartest guys ever. It's mainly because we watch all your videos but what she doesn't know won't hurt her. Thanks again.

[@stub4trks]

you have got to stop putting gas in tayrl's coffee , I think it's effecting his teeth.

[@hunter7476]

Yea he’s got taryl teeth for sale they are made to look like his I feel like I need them I love me some good taryl apparel also I’m not sure that it’s good to drink gas taryl. !!

[@danielprivate7442]

Dinosaur juice is good for your teeth. (never drink gasoline)

[@The_Warrior526]

He took dinosaur juice out of the carbutrator into his Taryl mug and set it down on the muffkin. This was all from a Kroller engine.

[@bluepvp900]

affecting, it's affecting his teeth, or if you prefer, it has an effect on his teeth

[@bluepvp900]

I'm sure someone will take issue with my correction, so let me just say there's nothing wrong with a good education. Besides, I'm a veteran, so your taxpayer dollars helped provide me with said education and the least I can do is share it with you for no charge.

[@salvadoravila9095]

I turned 48 yesterday and got home from work to find a new mustie 1 video. Is that a blessing or what??

[@craighopple8527]

May have had better success with the glue up of your tire without inner pressure pushing out on glue👌

[@wallacesmith865]

Thought same

[@patmx5]

Your friend will love the bagger when it comes to doing leaves - it looks like you've literally vacuumed the leaves up it leaves the grass so clean. I bought the 55" version with the Kawasaki engine about four or five years ago; have around 60 hours on it now (there might be a cutout for an hour meter in the crosspiece behind the seat - it's an option on the later ones at least). I found the trick to driving it is to hold one tiller bar steady and move the other back and forth to control the direction - it reduces the PIO (pilot induced oscillations) that otherwise make you look like a drunken sailor trying to cut the grass.

[@themotoguy5199]

Came up looking like new! Would sell for a lot Around my area. Great work, love the small engine fixes.

[@ronaldbechler1162]

your struck a home run on this mower. Its all but new. Good Buy!

[@tommmarree3689]

Mustie, you STOLE that Toro!!!!! There wasn't even dirt on the rear tires, probably delivered to the house and the guy died right after that. Nice money to be made at resale, man on man......lol

[@rstephe]

97 degrees, I was sweating thing of it. Surprised the fan and A/C noise not more. Thanks for sharing.

[@chriskampman2189]

That machine looks so fresh that I’m wondering whether that upside-down blade slipped through QC at the factory. 😜

[@pinwizz69]

Another awesome Mustie1 episode I missed. Back when he still had muttonchop sideburns working from his garage. I love when one pops up when I'm jonesing for one. Hopefully we get one tbis Sunday.

[@nodsib]

Hahaha, found it instantly. Upside down blade, lol. Do landscaping and I can't even count the number of times i've caught other crew installing them upside down. Very common mistake for those that do the mowing, but don't have a lot of experience with maintaining equipment

[@tomtheplummer7322]

Yupper. Put an edge on the blades while jacked up. Get a new tire. Mow.....

[@Earthneedsado-over177]

Had my zero turn for five years and one spring put the blades on upside down. Doh!

[@kirkb4989]

Mr Mustie1 - I never understood how useful a jumper pack was until I watched you using them for just about everything. I ended up acquiring one recently and it is really a game changer. Thank you.

[@sneal77777]

I got one of the side of the road started right up I was like why did they throw away until I went to mow brand new blades upside down traded it for a big electric heater and installed in shop

[@tomtheplummer7322]

Fortunate find.

[@tomjohntig]

Two Sundays in our week with Mustie, just loving it keep them coming Mustie 👍👍👍👍👍👍

[@ehsnils]

Louis Rossmann had the same camera issue - the need to use an app to get the camera running. The only reason for that is that they want to track you, so don't use it for privacy reasons. So far GoPro don't do that, even though GoPro have some quirks too.

[@Rienck]

What an awesome surprise!! Thanks man!!

[@Chr.U.Cas1622]

Dear Mustie1. 👍👌👏 Well done again. Seems to be a really good machine. Over here in Germany Toro is very expensive. You could have made a lot of profit but friendship counts definitely more than money (at least mostly). I'm wondering if this device wasn't used because it mowed bad (because of the one upside down blade). 2) Yeah nut, cut the sand! 3) Nice Buffalo footage. Every time I see a Buffalo it reminds me instantly of the fantastic Kevin Costner movie. Thanks a lot for making teaching recording editing uploading and sharing. Best regards luck and health.

[@philipchandler330]

Your work has inspired me to get my big snapper riding lawn mower running, turns over won't start carburetor check first

[@robertstuart4]

Ya might try letting air out of the tire before gluing. the hole might seal, not much of a chance while air is escaping through the hole

[@sirsteele]

Loved the mowing video at the end... was expecting the Keystone Kops to show up and chase you around the yard! Thanks for the mid-week video, and showing off the wife's victory garden!

[@5150mxVW]

43:34 : was that your David Lee Roth dismount ? :)

[@SladesVWBeetle]

HaHa!! That was good Jason!! 😂 If I try to jump like that I would end up getting hurt.

[@davekauffman8727]

The younger guys have no idea what you are talking about, or who DLR is, nevermind Van Halen's song "Jump". Good one :-)

[@thehochmaster2]

@@davekauffman8727 24 year old here, VH is the best and Hagar just could not fill the void that DLR left behind

[@charlienorton2337]

RIP Eddie

[@robbusheay4258]

I love my Toro time cutter.........makes mowing fun and a hell of a lot better than a tractor.......you'll love it !! Oh, and push the throttle all the way forward to start.......then pull back.....well, on mine anyway!!

[@carldarlington7395]

Deflating the tire before gluing might have worked. The air just blew out the glue.

[@davekauffman8727]

You don't need any gimmick like goofy teeth to appeal to us, you're just a very good mechanic. that's why we love and respect you. Don't let the idiots get under your skin, I know that you know what you're doing, they are the ones who need to learn a few things! God bless you and the wife and dogs :-)

[@Jayf1981]

Yo know Brians going to drive it in the woods😂🤣

[@Deer-Run-Farms]

Lmao gonna have big 4 wheeler tires on it and a winch before mustie leaves! Next video "trail riding a zero turn" !

[@josephsteffen2378]

You scored! That sucker is mint! Bug-nut got grins and smiles for years. Chicken dinner! Hey Zero turns put a lot of stress on the outside walls of tires, inherently. Gota replace the tire.... oh well. It purred when first fired up. 400$: Major score. What else can you say. Dig the whole setup.

[@wadechristianson9511]

Deflate the tire before you glue it so their isnt any pressure on that sealant trying to adhere

[@Earthneedsado-over177]

I thought the same thing. Probably would have worked. If only he could hear us!

[@TheProblematic93]

Came to the comments to say the same.

[@pkd4697]

Nice dismount Ole Twinkle-Toes! Great mid week surprise, another fun little project completed! My little shop here in Georgia is at 102 degrees when I open the door. 90 would be like air conditioning.

[@starts6493]

bruh I've been dying to get one of those. And I can't find anything broken or not below $900, I wish I had that kinda luck.

[@10832894]

Thanks for your wonderful videos , it’s saved me hours of work just knowing how to approach many repair issues . Couldn’t

[@volvoben2]

"Cut that sand!" Yup, looks familiar

[@mikemcguire8351]

Is that North eastern for cut the cheese?😂

[@paulsullivan9117]

Nice..... you scored an easy fix for a change and it looks to be a pretty cool unit, as well!!

[@gregdawson1909]

probably came off the assembly line like that, and the dealer never even looked under the deck

[@sbuzz5889]

my thought too ! or dealer set up before delivery ? $ 6000.00 mower/ no way the old man did it. avoid that dealer

[@axxxxman]

So nice to see the old shop and yard, the new shop is nice but I miss the old one.

[@danbartolini27]

I can mow with a tractor all day long I get on a zero turn and I start hitting things

[@brianellman]

Yes. those zero turns are a blast. used a John Deere and a Walker. Walker doesn’t like wet grass at all. and small stick I found out. your a kick in the pants. Keep it up. :-)

[@christianbuczko1481]

I think you should watch goonzquad, they could use half the stuff you rebuild, and need a repair man.

[@jsmit8686]

So who should watch who?

[@christianbuczko1481]

@@jsmit8686 i was hoping for a collab vid.

[@steverennekamp2125]

Daaaaaang son!

[@mikemcguire8351]

Nice. Enjoyed. Have a great day.

[@1armedguy4]

My lord this machine is hardly used, or it looks that way, definitely hasn't been abused.

[@kingspanky2794]

I was thinking the same thing. And for 400$ I think? seems like a good deal for some work and elbow grease. People where I live would ask 1000$.

[@Eremon1]

Well what a nice surprise for my Wednesday, a Tuesday Mustie1 video. Highly appreciate your efforts and the resulting videos. Cheers.

[@danishnative9555]

"I called Tech Support but got no answer" LOL. Don't call us, we'll call you. And highly likely from a 3rd world outfit of experts.

[@SavageNitemare]

I feel ya on the heat. I live in south alabama right on the gulf. 100% humidity and trip digit heat from June to September. Was 105 today. Working on mowers outside all day is not for the faint of heart...