Yongnuo RF-603 II Wireless Flash Trigger Transceivers (Product Review)

[@angievr164]

The only tutorial that actually worked. Thank you so much!

[@davidroberts6721]

Thank you for a super clear explanation of the Yongnuo RF603 ll. So much better than the manual.

[@johnl4469]

Thanks for your easy to follow instructions, made all my frustrations with the printed instructions disappear.

[@genyadubelt4254]

I was looking for this video for years! Thank you!!!!

[@photovisionproject]

same as Jnah ... you made my life so much easier ... THANKS A LOT!!!

[@VadimNYC]

Thank you! But you forgot to mention the Nikon version at least, flash will not do i-TTL, so just manual flash setting will be required from user.

[@mymagicmurals]

At 1:19, what is the point of the 4-bit channel switch for 14 channels? When do you use it? I see you didn't change them here on your video. Thank you for your answer

[@deqkuanggl]

On 4:28 i didn't get it.. Can i use rf603ii with 1 camera and 2x speedlite yn560iii? Fyi i dont want to buy another flash trigger..

[@I666U]

I have the Canon 5D Mark IV and got the Yongnuo YN600EX-RT II flash , and I recently purchased Yongnuo RF603CII wireless flash trigger set. I have done any type combinations, settings, read the whole manual for the flash and the wireless flash trigger set; hours of researching. and not luck trying to trigger by remote control the camera and the flash at the same time. - the camera works but the flash won't fire. I believe the YN600EX-RT has an internal receiver, and the YN600EX-RTII supposedly sync with the RF603 II, still I can not get the flash and the camera to sync. I have tried and mount the wireless trigger on the Canon and connected it to the camera via shutter release cable and then mount the flash on the other wireless trigger and they work just fine when I press the camera's shutter button - If any one out there has the same problem and know how to solve it PLEASE do contact. Thanks ! 🤓

[@TGTruman]

Can you put one unit on your camera and then the flash on top and fire the camera & flash remotely?

[@tw9535]

Fantastic video. Very thorough and carefully explained. Thank you!

[@AlgisInfante]

sold my 2 pocket wizard plus III on ebay and bought = 2 - YN 560 IV, 2- YN RF603c II, 1 RF 560 TX, 8 AA ENELOOP BATTERY, 4 AAA ENELOOP BATTERY, AND 1 GAFFER BLACK TAPE. for the same dam money. I WIN ( mortal kombat voice ) = MY CAMERA FUJIFILM XT1

[@SopranoSister]

How do you make sure they are both on the same channel? I'm finding these very confusing, and there was no assistance by the shop I bought it on online. Do these work with the Yongnuo YN467 for NIkon? I have 2 RF-603II N transceivers.

[@derickarmada3857]

Is the transceiver compatible to other flash brands such as nikon, canon, neewer, etc?

[@miltonwelch8619]

If these are non-TTL, why does it matter which brand of camera you use it on. Also, why is it necessary to add dedicated contacts on the hot shoes?

[@trevorfranklin4102]

How do i know which one to order for my T6s so i get the right cable?

[@davidribeiro6905]

Question: What if you want it to trigger a remote camera (let's call it camera B), like you exemplify here, but without pressing the button on the device, and having it trigger when you press the shutter on camera A. Is that possible? Situation: Camera B is behind a goal on a soccer match, the Yongnuo RF-603 II is on top of the camera, set as TRX as you said, and connected via wire. Camera A is with the photographer, remotely, and the Yongnuo RF-603 II is connected also as TRX on the camera. When the photographer presses the cameras shutter, will camera B trigger as well, or only if the device's shutter is pressed? Basically I would like to avoid having to press 2 buttons to trigger the 2 cameras, and only rely on pressing camera A's shutter to trigger both. Hope that made sense. Thank you for your video!

[@Dawatalhaq]

No you can't with this yongnuo you have to trigger by hand if you want to use the camera shutter to release the remote camera get pocket wizard

[@Zoran1899]

According to this video, you can do that: kzbin.info/www/bejne/eqGuqJuqd92Dec0si=EQvf5lZWGTVHVWRN I know it was four years ago, but did you find any other devices?

[@laagventurepbpv6329]

Very nice! And a very informative video! Thank you so much!

[@filmeryu4422]

I have the RF-603N II and am using the Flashpoint TT685N R2 flash. Do you know why I can't get the flash to fire? I tried different channels, set the camera trigger to TRX, flash to TX, reversed it. Still doesn't work. Any tips?

[@dodekstudio7398]

Hi. I have a YN560 II and I would like to control its power using YN560-TX and two RF-603 NII. Is it possible?

[@njtv835]

Can i use rf 603 ii c1 to t5i and my speedlight yn560 iii? Is it compatible?

[@seniornetpapakura168]

Which RF Trigger should be used for a Pentax K 50? RF-603 11 N or RF-603 C?

[@jujai.akainu]

Did it work on 1200d to make wireless remote shutter to self potrait, and auto fokus?

[@alifzack]

Can use 2 yn560iv with 1 yn603 mark ii?

[@AlanWatson]

Just wondering if you can help - I bought 4 of the RF603 2's and can't get them to work with my Canon 5D Mk2 - I can't get them working at all and have done all the "normal" checks - any help would be appreciated.

[@kallanet]

hello i have only one remote bought for my nikon d7200 camera with a nikon sb910 speedlight , it doesnt commuincate as shown on the video. do i need another remote for it to work? thanks eli

[@krzeselko]

Can you use yn600ex-rt flash to control another flash mounted on RF603 C3? My concern is bulking up the camera and connectivity issues with flash mounted on transmitter.

[@mrz1342]

Is it possible to use 4 unites sync together? (One on camera and 3 off camera)?

[@nqobizizwesibanda8200]

Thanks for the informative video. I bought these and they are not responding and further more I don’t think I specified tht I needed them for my Nikon. 🙆🏾‍♂️

[@7thsignphotography]

Does anyone know if you are using the Yongnuo 622TX as a remote trigger on the camera work with a Yongnuo RF 603 trigger ( in hand ) to trigger the remote capabilities or do i need another 622? I just wasn't sure if they used the same rf signal

[@pugalagiri]

i have YN 600 EX RT and RF-603C, for some reason wireless trigger is not working :-( is there any specific setting i need to do in flash and camera ?

[@akhandmahmoodashek3506]

What is setup in the Camera? My camera is not communicating with the trigger ! Thanks in advance...

[@cameraman655]

will any of Yongnuo's triggers work it Fuji's X-Cameras?

[@ΓΙΩΡΓΟΣΓΑΒΡΙΛΑΚΗΣ]

Which type do I need to use it with my fuji X100S?

[@abdullahbinabbas8965]

i wanted to ask, i have a pair rf 603 ii and yn560 iii, can a single pair of these be used to trigger more than one off camera flash? or can it only fire a single flash?

[@magicnala5538]

You are number oneeeeee Thanks

[@ansarbc8437]

This is high speed sing triger or not..?

[@redmalco]

can I use this receiver on my studio lights?

[@xiajing3012]

hi... is it working also in NIkon d7100? i've been wanting to buy this kind of trigger for nikon but im not sure if it will work on my camera

[@MrYankee853]

yes..I've had these for my D7100 for 2 years

[@abaggie7771]

Yongnuo RF-603c Canon work for nikon as its doesn't staste on box

[@jedteng2650]

whats the difference on the letters on the end? like rf-603c

[@_Aditya_Rai]

Jed Teng you usually get two variants of this product - one ending with "c" like 603c, which stands for Canon model and other one is the one ending with n, like 603n which obviously is for Nikon model.

[@marvinsomoza3978]

Are these units compatible (triggering) my Canon Speedlite 430 EX II?

[@azakerahman1471]

Yes i often you that setup

[@iacob4444]

Somebody knows in first generation is compatible with second!(Youngnou RF-603c with RF-603||)Thank you

[@Lizerator]

Great explanation, thanks

[@Wildavismedia]

Nice job dude!!

[@steveparent3627]

TRIGGER ONLY FIRES FLASH AT 1/2 SEC AND NOTHING LONGER...WHY?

[@alamphotography_]

nice

[@marksphotography]

meyin 604 are still better triggers for the application

[@willrevellet8651]

Like .

[@jogaytillman3070]

The cord is what brought me to this video and it wasn’t helpful

[@tedp9945]

got these for my nikon d5300 works like shit.

[@So0k1]

whats is the lowest sync speed u can achiev?for example can u do like 1/100,1/125?i already know the highest is 1/250 in some cases 1/320.