YOU SHOULD TRY THIS! - W124 CUSTOM PCV HOSE SETUP PT. 1

Hello All, in this one I will show you how to swap out the rotten old pcv system hoses for silicone replacements that will never go bad. Not only will this mod make the car a lot easier and less of a headache to service, it costs only a fraction of what it costs to replace the factory pieces.
Hope this is helpful, if you have any questions as always feel free to comment below!
#w124 #pcv #engine
If you want to support the channel in anyway, PO box and PayPal below:
ANDERZÉN
PO Box 215
Kirkland, WA 98083
paypal.me/brooksxdesign?local...
Thx for Watching! Enjoy :)
---- Other Places to find me and the cars ----
Follow me on Instagram: @anderzen.amg
Find me on MBWorld: kaixdiego
Find me on 500Eboard: anderzen
Find me on Soundcloud: kai diego
Contact me via email: [e-mail]
#124.034 #400E #Lifehack #design #W124 #M119 #400E #500E #Legendary #AMG #ML55 #C55 #E420 #Vlog #Coolerworx #Yellowspeedracing #DNDPerformanceInterior #RaceIQPerformance #FCPEuro #VRPSpeed #Engine #Tuning #M113 #M112 #M119 #w163 #w203 #Classic #V8 #SaveTheManuals

[@ANDERZENAMG]

Important Update! Thank you to Bicylindrico and LE555 for the info on the Metering orifice in the PCV system, See the video linked for solution: kzbin.info/www/bejne/oKDRqKV7etaheKc&ab_channel=ANDERZ%C3%89N

[@bicylindrico]

Really enjoy your videos and happy to help whenever I can. Merry Christmas!

[@ANDERZENAMG]

@@bicylindrico thank you so much! This channel lives on thanks to those like yourself willing to share important info and feedback. Happy to create and share! Merry Christmas to you as well 🎄

[@booboo3633]

E class is the best. Cool video.

[@Hoogilife]

Good Job bro🙏🏻

[@criticaljim1]

Nice, thanks for sharing

[@ANDERZENAMG]

Happy to share! Thx!

[@jayd5962]

Nice work, as usual. I recall seeing this (subie) kit in different colors black red blue on amaz. I do wonder though if the more flexible silicon tubing kits would work? (maybe not so well with the tight angles?)

[@ANDERZENAMG]

Yea, you can find them in all kinds of colors. I do have some flexible silicone tubing that may have worked. Might be a bit tricky with the angles but probably doable too with the right connectors

[@bicylindrico]

That Y section that you removed has a metered size hole in it to restrict flow. Check out the old part

[@ANDERZENAMG]

To reduce flow for what? Thx

[@Leonardo555ZZZ]

@@ANDERZENAMG To maintain positive crankcase pressure at all times and so to prevent backflow at high engine speeds.

[@ANDERZENAMG]

@@Leonardo555ZZZ thank you, I will put in a fitting to the same dimension on that initial T side. Much appreciated, I’ll be sure to update video info after.

[@ANDERZENAMG]

Update video just added, thx again!