Building A Carbon Wing For My R32 (INFMS Ep.1)

[@driftking5929]

RB Best engine, pull like a jumbo jet, sound like heaven, drink like my father.

[@henriksti2]

Really amazing format on the video, poblably the best one so far in this channel. I've been watching you guys for 2 years or something, back on the parking lot silvia work days. Great work Jesse

[@YYClowcals]

🙏🙏 amazing to hear, thank you!

[@326piotrekify]

Damn... So inspiring. From a fun project called 'Making a Supra diffuser' to this, an actual art. Looking up to you guys!

[@YYClowcals]

🙏🙏 Appreciate the OG support man!

[@minibuds6967]

Ive been watching you guys since your last day at school video and honestly this is tha best channel of youtube!! You guys make funny n great videos but at tha same time give us life advise n to never give up!! Keep up tha good work! You guys have come up so much and desever it!!! :) lowcals for life!!! From AZ usa

[@38bmxboy]

There are no words in the world to describe how much I admire you for your hard work and everything you do. The wing doesn't look like something I would put on my car, but the work that you did is amazing!

[@YYClowcals]

🙏 massively appreciated

[@Sunny2456-]

That wing is so nice that it looks oem af. Jesse we all know why you do it the hardest way first, it's because you're not afraid to take risks and have the capacity to go headstrong into something like this and succeed thru trial and error. Not everyone can do that 😊I had no clue how any of this worked with moulding and plastic and epoxy but now I'm hooked to learn more about the process. Excited to see progress and future videos. The pic on insta of the skirts looks good and pair that all with one of your dope aggressive diffusers and you'll be rocking. Fingers crossed on a successful cut 🤞

[@YYClowcals]

🙏🙏🙏

[@Coupe4l]

LOWCALS for life💛💛💛keep hustlen working for what you truly desire

[@YYClowcals]

Ayeee appreciate the love and support man! Always

[@oteng9882]

altezza

[@mosesnavarrette5388]

Would it okay if you just stop at this step primer it paint it and put it on the car?

[@itsConsistent]

this is dope i really fw this idea cant wait to see the next episode

[@Fatal_Addiction]

Loved the video creep up the good content guys mad respect to all of you

[@YYClowcals]

Appreciate the support! 🙏

[@reallyanti]

These are really interesting videos, love the editing style. I've been doing carbon for years now, just started my business last month. That "Oh god what if I fuck this up?" feeling never goes away haha. Keep pushing.

[@YYClowcals]

🙏 appreciate the support man! Any criticism/input is hugely appreciated 🙌

[@danielstromgren710]

Man what happened guys..? I went from watching every newly released video to now yall haven’t dropped in 4 years..

[@Colyers]

I went to a Lamborginia carbon fiber lab in Seattle a few weeks ago from a work/vendor thing. It was amazing and I think you guys would really get a kick out of it.! Google "Automobili Lamborghini Carbon Fiber Lab and Museum" if you want to learn more. It would be wild if you guys went the next time you visit Seattle. I worn you though it's not cheap.

[@YYClowcals]

Thank you for this! 🙏

[@kalan4787]

...when you are working from raw eps, you seal the foam to create a boundary layer before moving onto any surfacer that contains solvents. My "secret" is to use TiteBond III wood glue as the sealer. It helps me get more, higher quality results out of cheaper materials. Also, cutting a cross sectional sliceform out of foam is a very good technique for a large part like a wing. But for smaller, more "technical" shapes, I prefer to start in foamcore. It's like a buck fiddy a sheet at Wal-Mart. You can obviously kerf it to get bends, arcs, and curves. It's paper backed on both sides so you can write on it very easily. I start all of my sheets by drawing a full 1cm grid across the whole sheet with an ultrafine sharpie. A super sharp Exacto makes it very easy to get very precise handcuts. You can also remove the backing paper from either or both sides of the sheet(with water) and get a perfectly uniform 1/8" sheet of foam to work with. Again for foamcore, I use TiteBond III as a gesso/reinforcement/sealer. Good luck in the future. Very nice wing.

[@plnko]

2 videos in this week.. Got damn its a good week.

[@YYClowcals]

😂👌

[@LuwisRz]

I'll be needing a diffuser soon I'll hit u up when I pull the trigger

[@YYClowcals]

Looking forward to it 🙏

[@s2NecRo]

It looks great. But will it be functional in the Sense of aerodynamics or is it just for looks?

[@YYClowcals]

I studied aerodynamics and designed it in accordance with the theory's - but haven't actually used a wind tunnel to confirm those theories. So I'm not too sure :)

[@earnestbunbury2103]

@@YYClowcals Sounds like a line from 'Flight of the Phoenix' ... lol

[@YYClowcals]

😂 let's be real - less than 5% of the aero on the market has been actually tested

[@OMGAurora]

Y’all have any custom made parts for the Altezza?

[@YYClowcals]

Nothing yet, but we definitely will be in the future !

[@ProjectCDRFIT]

Amazing work bro!

[@YYClowcals]

Thank you 🙌

[@saniariley1526]

Hey guys wat happen to the contents???

[@jamieblaides1787]

Like your introduction keep up the good work

[@JOEGGGJOE]

Good work man, looks good. I know this may be your first time making a part to mold. But fix all your imperfections now. You may not get the mold perfect after. You spent all this time all ready, just do it now. I’d prime, base coat, and 2k clear it to get a perfect seal for protection. And where you getting $8,000 from? Damn man.

[@creekchub2105]

This is so cool

[@YYClowcals]

🙏🙏

[@braniboy2825]

🔥🔥🔥

[@YYClowcals]

🙏

[@uDripiRip]

Does he still have the supra?

[@YYClowcals]

Yes!

[@autoinnovate9800]

Hi Jessie! If you put in a RB25GTE it would be a sleeper!!!!

[@YYClowcals]

Love that idea! 👌

[@zakiramin4510]

Hello how u all doing

[@YYClowcals]

Excellent, how are you doing

[@zakiramin4510]

Good great video keep it up

[@Alwaysdead101]

whyd u gotta take the vowels out

[@Alwaysdead101]

holy shit this video is so dramatic, none the less congrats on the growth

[@YYClowcals]

😂 just to keep the title shorter. The actual brand name will still contain the vowels. Tried to make it extra dramatic 😂

[@handanarts]

Loved the video

[@YYClowcals]

🙌

[@S-Kidz]

I would do a fiberglass mold of it.

[@YYClowcals]

I am 👍

[@S-Kidz]

@@YYClowcals nice.

[@donavinnguyen]

Damn I haven’t watched a video since when you bought the white s15 and the red r33 had white and black rims,I am disappointed in myself 😭

[@YYClowcals]

🙏 appreciate the support man!

[@autoinnovate9800]

RB25DETT

[@YYClowcals]

👌

[@kasperdaignault6349]

That's fuckin sweet!

[@ghostganginc]

First 🤘🏻

[@YYClowcals]

[@earnestbunbury2103]

@@YYClowcals

[@BushWhackerGaming]

Boringgggg, miss the old vids