Zelio PLC analog input scaling, configuration , SR3B102BD,

#automation #plc #plcprogramming #motorcontrol #pump #schneider #zelio
Zelio PLC analog input configuration

[@HaveaLookAround]

Nice, it was very helpful.

[@shiranperera7997]

This is very helpful.need more videos about zelio PLC.

[@sennapparajan.p]

sure

[@joemalotcnj1987]

Thanks for sharing! Could you do an example where one pump turns on as pressure drops below a set point and the same pump turns back off at a higher pressure... pressure "makes" set point?

[@sennapparajan.p]

it simple.... i have done some video for this..

[@Darryl-sl4bw]

With this example, and thinking of a dual pump scenario, does the plc have the ability to switch on at a set value and continue running till its signal reduces to the hysteresis that is set?

[@sennapparajan.p]

this is a sample logic for scaling the analog input signal from external sensors...

[@manojabraham8290]

Explained well

[@darciosabbadini8869]

tanx a lot

[@n.vajiravelvel9402]

Hello brother, how to change language from FBD to LD

[@sennapparajan.p]

hi..u cant change the program from FBD to ladder.

[@yorgospaidis9171]

Your programming is primitive !!

[@sennapparajan.p]

really ?

[@yorgospaidis5165]

@@sennapparajan.p You have to use a "dif" for ON to OFF transition, in order to avoid output flickering.