Zhiyun Weebill Lab TINY Gimbal & How to Balance with A7iii

  Рет қаралды 33,003

Chris Brockhurst

Chris Brockhurst

Күн бұрын

Пікірлер: 129
@chrisbrockhurst
@chrisbrockhurst 6 жыл бұрын
The vortex mode on this thing is insane! Anyone else pick one up?
@MichaelTapel
@MichaelTapel 6 жыл бұрын
Nope :-( but I might get the crane 2 someday, just a little broke atm.
@kaveboi12
@kaveboi12 6 жыл бұрын
Just picked it up last week and couldn’t get it to work on vortex mode. Turns out I’ve been balancing my gimbal wrong for nearly 2yrs hahaha... Note to everyone: update the firmware and do not neglect a single axis or motor(it’ll be a defining factor to utilize your gimbal’s movements)!
@chrisbrockhurst
@chrisbrockhurst 6 жыл бұрын
Kevin Nguyen very true!!
@thespradman
@thespradman 6 жыл бұрын
I saw a guy on a different channel take a cheese plate and mount it under the base plate of the gimbal with an extended screw. He then screwed counter weights to the underside of the cheese plate. I don’t think he had a quick release on top of the base plate though. Thanks for the vids man, hope that helps!
@justinnewman137
@justinnewman137 5 жыл бұрын
Not sure if this will help anyone but I have a decent work around for a manfrotto mount. After jacking around for hours trying to get mine balanced with and a7iii and ziess batis 24, I realized it helps a ton if you go ahead and take the whole slider Mount off (space and top slider). You just need to remove the tiny Allen and it slides off. Then you can mount the manfrotto straight to the base plate giving you a lower sense of gravity and allowing your eyepiece to clear. It still didn't balance perfectly but it's closer and gimble works more freely. Hope this helps.
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
Interesting.. will have to check this out. Thanks for posting!!
@Sr7Sr7Sr7
@Sr7Sr7Sr7 5 жыл бұрын
They have a quick release for the stand part so you don’t have to constantly screw it snd unscrew it to move it. The quick release attachment goes on both screwholes on the gimbal and takes just 2 seconds to switch the stands position.
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
yep, I made a video about it a couple weeks back. One of the best pieces of kit I have every seen!!
@mohamshaban
@mohamshaban 5 жыл бұрын
I like the way you smell your Weebill Lab😂 I always do it with my new gears
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
New gear smells fantastic, especially gimbals haha
@mohamshaban
@mohamshaban 5 жыл бұрын
@@chrisbrockhurst I agree 😂
@chosenideahandle
@chosenideahandle 5 жыл бұрын
It's the petrochemicals. They're intoxicating.
@mtwproduction
@mtwproduction 5 жыл бұрын
I managed to balance mine with the same quick release like yours. I was useing EOS R with EF to RF adaptor. The only to balance it with it is have a shorter and lighter lens (L series lenses will not work. to front heavy). 24mm and 50mm USM works like a charm
@johnnormanrivera1671
@johnnormanrivera1671 5 жыл бұрын
have u try the canon eosR with 16-35L f4?
@ZachDriftwood
@ZachDriftwood 6 жыл бұрын
I'm a big fan of the design and honestly the inclusion of the tabletop tripod legs is nice. I never got anything for my crane v2 to self stand and had to balance it yesterday on a bar and it wasn't fun.
@chrisbrockhurst
@chrisbrockhurst 6 жыл бұрын
Zach Driftwood the ability to lock the axis of these is hands down the best feature. So much easier for balancing, carrying when not turned on, storing and general piece of mind, with the legs too (and they are genuinely very solid) I’m starting to like it more and more. Just literally got back from shooting a bunch of stuff witth it!
@PruneM_
@PruneM_ 2 жыл бұрын
Hello, and thank you for this video. I need help please: when I calibrate my stabilizer on the tilt axis, the plate slides when I point the lens up or down, while the screw of the plate is tight... Could you please tell me why the plate does not stay fixed when the screw is tightened? I'm desperate because I can't use my stabilizer... Thanks in advance for your help
@geebes2112
@geebes2112 6 жыл бұрын
Thanks for showing us, seems like it would be a great option.
@chrisbrockhurst
@chrisbrockhurst 6 жыл бұрын
It’s so tiny, and so well built. The lock systems are genius!!
@qithree
@qithree 5 жыл бұрын
Hi Chris. Thanks for your video. Can I know how to use vortex mode for A7 iii + Tamron 28-75mm? I tried it didn't work by horizontal way but the vertical way is ok. Is it too heavy for weebill?
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
it will balance and work perfectly fine :)
@MD-uk3zr
@MD-uk3zr 5 жыл бұрын
Chris, thanks for the videos, are you having any issues with the motors after updating from 1.88?, I'm now on 1.89 with my A7iii and 16-35- motors working all the time now. I heard that 1.88 was the issue and I couldn't update soon enough but seems like damage was done?
@markshirley01
@markshirley01 5 жыл бұрын
I'm looking at either this or the SC for a RP and 35mm RF. I need a lightweight FF gimbal setup because I travel with my work, but need a fast apature as a lot of the time I need to blank out background for various reasons.
@ericguqin
@ericguqin 5 жыл бұрын
when I use the same A7iii and 16-35/f4, why the eye cup keep scrubbing the back arm? If I move the camera a bit forward, it won't balance.
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
Is this specifically for inception mode?
@ericguqin
@ericguqin 5 жыл бұрын
@@chrisbrockhurst no really, just regular mode. In order to avoid it I have to push the camera a bit forward and turn on the gimbal to let it counterbalance the weight. I guess it will gut the battery life a lot?
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
Doesn’t sound like you are balancing it right, I didn’t have those issues with that exact set up..
@glitchlife4639
@glitchlife4639 5 жыл бұрын
Have you tried out the time lapse feature with the a73 and the cell phone app that's used with this gimbal?
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
I havnt tried it out yet.. going to soon though
@nicholassmith7723
@nicholassmith7723 5 жыл бұрын
Skip to 11:30 for the A7III balancing part
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
What he said ^
@nicholassmith7723
@nicholassmith7723 5 жыл бұрын
@@chrisbrockhurst Hey Chris I've got the A73 and Tamron 28-75 balanced, the motors are set to high, but no matter what mode I put the gimbal in my horizontal axis just spins around. I tried to update the firmware in app but the app won't connect to my pixel 3 either. Any ideas?
@michaelscaplis
@michaelscaplis 6 жыл бұрын
Just a suggestion, next time use a white T-shirt or a white table as it will give better contrast with the product. Awaiting your next video to decide between this one and the Crane 2.
@chrisbrockhurst
@chrisbrockhurst 6 жыл бұрын
I don’t own any white tee shirts 😂 but you are very right! I don’t like this angle at all, but needed that table!!
@michaelscaplis
@michaelscaplis 6 жыл бұрын
Chris Brockhurst White T-shirt crowdfundingplatform? ;-)
@chrisbrockhurst
@chrisbrockhurst 6 жыл бұрын
😂 yes!
@ZachDriftwood
@ZachDriftwood 6 жыл бұрын
or maybe a light to pop off the background ;)
@DaniloDelTufo
@DaniloDelTufo 5 жыл бұрын
Interesting video! Is it compatible with the new Panasonic S1?
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
thats a great question.. depends on the actual release version weight of the S1!!
@DaniloDelTufo
@DaniloDelTufo 5 жыл бұрын
@@chrisbrockhurst Panasonic S1 is 899g, the lens is 680g (S Pro 24-105mm f/4 Macro OIS). What do you think?
@shtrudel-pu1cm
@shtrudel-pu1cm 5 жыл бұрын
please HELP ! i have a big problem (sony bug?) ! when i conact the a7iii to the weebill lab,the camera start to recording on 1 card instead 2 cards! How to fix it ? tnx for the video.
@dilippatel4126
@dilippatel4126 5 жыл бұрын
can i use my canon mark 4 with 24-105 in Weebill Lab?
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
Probably too heavy
@JoaquimGonsalves
@JoaquimGonsalves 5 жыл бұрын
Thank yu so much for sharing about the issues with a quick release plate. Will further hold off on saving for this gimbal as I have my Crane 2 which works great with a similar quick release plate that does wonders for cameras on gimbals when you need to keep changing batteries and not worry about re-balancing. Wonder if it will work with and M5 and a quick release since it is smaller than an A7iii, Or we could use the counter weights. Oh well, will wait and watch. Thanks again!
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
I think for m5 it would be ok as that’s a smaller setup!! There are Weebill lab counterweights which Iam looking at too
@BillionairesBoysClub
@BillionairesBoysClub 5 жыл бұрын
@@chrisbrockhurst You do realize, that there is quick release plate on the actual quick release plate? It's something you didn't mention in your video but is handy to avoid the balancing issues. Together with this piece, you have same ability to quickly change between handheld, gimbal work and attaching your camera to a belt or backpack without having to rebalance... www.zhiyun-tech.de/produkte/accessories/755/zhiyun-transmount-quick-relase-base-plate
@markshirley01
@markshirley01 5 жыл бұрын
Can a Weebill power a camera - for instance the Canon RP can be powered externally I think - this would get round the small battery problem.
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
I believe so, I haven’t used to be honest though!!
@LachlanPeknice
@LachlanPeknice 6 жыл бұрын
You missed the pan axis?
@chosenideahandle
@chosenideahandle 5 жыл бұрын
So gravity acts on a lateral axis where you live? Does it come from the left or the right? 😆 I'm not being serious, for anyone wondering.
@chosenideahandle
@chosenideahandle 5 жыл бұрын
@Aditya Permana putra Yeah I know, I was being a goof.
@studioalpha2822
@studioalpha2822 6 жыл бұрын
superb video mate but i got a doubt does the eye piece hits the motor when going underslung mode while mounted with monfrotto plate?... coz i have already thought of buying and use it as like as you... creative minds think a like right...
@chrisbrockhurst
@chrisbrockhurst 6 жыл бұрын
Thanks! Havnt tried it yet, but likely yes 😐
@taib0
@taib0 5 жыл бұрын
After watching loads of reviews on youtube including this one Chris my new Zhiyun weebill arrived today and thank god I purchased it from Jessops because its going back tomorrow I'm soooooo disappointed. I have paired it with a Canon 80D and a 24mm f2.8 pancake lens together they weigh 2.5lbs which is well in the recommended payload of 3kg (6lbs) stated by Zhiyun. When in Vortex mode it can't spin it stops halfway around and can't turn as it looks too heavy, also its arrived requiring a firmware update and when you go on the Zhiyun official firmware download site the Weebill isn't even listed under products :( so not able to update firmware. Then just to really piss me off the menu button is faulty it won't allow me to change motor speed or anything, so all in all not happy it cost me £579 and now I've got to mess around returning it and waiting 28days for my money back arrgghhh.....
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
That doesn’t sound fun, sorry to hear that! That 80D is a big camera compared to what I’m using but it should still balance.. does it balance properly prior to turn it on? Wondering if yours is entirely faulty and that’s why vortex doesn’t work properly. Hopefully they get it sorted for you!!
@taib0
@taib0 5 жыл бұрын
@@chrisbrockhurst Hi Chris, thanks for the reply, its gone back to Jessops this morning for a full refund as at this stage its pointless ordering another until Zhiyun sort out firmware updates etc. As I said when you go on their site for a firmware update the Weebill isn't even listed so I feel it's been marketed to soon its clearly got teathing problems and at £579 its left rather a bad taste in my mouth as I don't have a gimbal now I sold my old one last week :(
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
David Cross Photography I don’t think there are issues, I feel like there may have been quality control problems maybe and you maybe got an unlucky dud.. straight out the box mine works like a dream
@taib0
@taib0 5 жыл бұрын
@@chrisbrockhurst Hi mate, I did ask jessops if they could just exchange the Weebill for a Crane 2 instead of a refund but they said NO.... you have to be refunded and then do a separate purchase for the Crane 2 but its a shame as I do like the Weebill but scared of getting another dud.
@denvera1g1
@denvera1g1 5 жыл бұрын
depending on how much you're moving around and on what axis, counterweights might have no effect on battery life
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
its definitely possible. shouldnt be needed on newer gimbals now though
@Rafreezotech
@Rafreezotech 6 жыл бұрын
Great video as always...Any idea if it can hold A7iii with 85mm 1.8?
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
It balances fine with the a6300 and that lens so I’m sure it would hold it
@chetandamare7682
@chetandamare7682 5 жыл бұрын
How to reset all setting of weebill lab
@KandGProductions
@KandGProductions 6 жыл бұрын
Really looking forward to your next video on the Weebill! I've been thinking of getting it, but everything I've seen from other videos seems to say that the Crane 2 is actually much smoother. I'd love to have the lighter weight of the Weebill, but if its not smooth I'd rather just go with the crane 2. Would love to hear your thoughts on this!
@chrisbrockhurst
@chrisbrockhurst 6 жыл бұрын
from what I have seen so far it’s pretty impressive.. hopefully next week it will be out!
@KandGProductions
@KandGProductions 6 жыл бұрын
Chris Brockhurst Awesome. I’ll be there! 👍
@pavelvitek766
@pavelvitek766 5 жыл бұрын
nice video man, thanks
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
Thankyou!
@20jeccha10
@20jeccha10 5 жыл бұрын
hey! Great review! i have a question about this Gimbal. does this gimbal can support Camera with Vertical grip?
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
Hey! I’m going to make a video about using a grip.. short answer right now, I can t see a way (it’s too too heavy)
@20jeccha10
@20jeccha10 5 жыл бұрын
@@chrisbrockhurst ow.. ill wait men. pls try with cage please!
@CamiloCastanedaa
@CamiloCastanedaa 5 жыл бұрын
I got mine to balance with the manfrotto quick release by putting the bottom plate a bit further forward. i.e. don't put the bottom plate at the furthest. Maybe that would work :D
@PatrickAduna
@PatrickAduna 6 жыл бұрын
I wonder if a sony a7iii + Sigma 24mm 1.4 E mount will fit on here.... i have my doubts about replacing my gimbal with this.
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
The weight isn’t the issue, it’s how front heavy/too heavy the setup is that’s the problem. I’m looking at that lens so if I end up getting it you will know!
@A12Diary
@A12Diary 6 жыл бұрын
I appreciate your efforts but man, 19 minutes with no experiment 🤔
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
It’s coming!
@BigSi-cd7ys
@BigSi-cd7ys 5 жыл бұрын
Anyone recommend where I can get extra batteries for the weebil lab would like a spare set. There seem to be alot of generic 18650 type batteries around are these safe to use on the weebil?
@jdolo829
@jdolo829 5 жыл бұрын
Can you try the a6300 with other lenses? Or adapted with canon lenses?
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
Yeh it will definitely work with the A6300
@crackerae
@crackerae 5 жыл бұрын
Why when i connect it with my sony a7 III it disable steadyshot and 2nd sd card recording?
@astello8893
@astello8893 5 жыл бұрын
Anyone have trouble sliding the quick release plate on? Mine gets stuck in the middle before reaching where you hold down the button
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
hmmm doesn't sound right. it can be fiddly but is ok once you are used to it
@getjcn
@getjcn 5 жыл бұрын
Great screwdriver 😋 told you it comes in so handy to always have on you!
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
😁
@revmatchtv
@revmatchtv 5 жыл бұрын
Helpful video!
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
cheers!
@colin_rootz
@colin_rootz 5 жыл бұрын
Smallrig has a replacement baseplate (either Arca-ype or Manfrotto) that allows you to attach small counterweights - which they also sell: www.smallrig.com/smallrig-counterweight-mounting-plate-manfrotto-type-for-zhiyun-weebill-lab-and-zhiyun-crane2-2277.html
@DeadPool-dp8zk
@DeadPool-dp8zk 6 жыл бұрын
That case looks like gun case , a hitman would carry🤣🤣
@chrisbrockhurst
@chrisbrockhurst 6 жыл бұрын
Gotta keep the gun steady somehow 😂
@joshuabonifacio943
@joshuabonifacio943 5 жыл бұрын
Looking forward for the test footage video (test with sony a7iii + zeiss 16-35 f4) 🙏🏼👌🏼
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
Joshua.. it’s coming today 😎
@d3ividl0pez
@d3ividl0pez 5 жыл бұрын
This is the first gimbal I've bought, I don't know why the motors vibrates and the gimbal become crazy in specific movements (I've seen a lot of videos of how to balance it, so that shouldn't be de the problem). I see there are some customizable settings in the gimbal like motor, pitch, roll, wheel... can anyone explain some of these points? :c
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
I’m posting a video today that shows my use and some test video.. see if yours is similar
@MarkHuynh7
@MarkHuynh7 6 жыл бұрын
Can you do it with the tamron? 28-75?
@chrisbrockhurst
@chrisbrockhurst 6 жыл бұрын
its coming next week :)
@TeamHokage
@TeamHokage 5 жыл бұрын
Is this compatible with 700d?
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
It should be based on weight alone!
@eatenetplay3931
@eatenetplay3931 5 жыл бұрын
You did not balance the pan axis. You need to hold the gimbal so that the handle is parallel to the ground and adjust the slider on the pan axis motor.
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
You are 100% right, I didn’t include it, whoops! Thanks for pointing it out
@azrifirdaus8250
@azrifirdaus8250 5 жыл бұрын
is the record button works on sony? how to connect it?
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
haven't tried it so don't know, sorry!
@MichaelTapel
@MichaelTapel 6 жыл бұрын
Nice one, please show us some samples too, and we expect your vlogs getting much more b-rolls now!!! :-)
@chrisbrockhurst
@chrisbrockhurst 6 жыл бұрын
Yep, filming a video this week ✌🏻
@paulm8157
@paulm8157 6 жыл бұрын
👍Nicely “balanced” vid. Thoughtful of you to point out Manfroto style base plate issue. Do you turn of cam IBIS when using a gimbal? About that “new product smell” I wouldn’t take in too much of it - no kidding - the smell is out gassing plastic compounds (like a new car). Not best, health-wise.
@chrisbrockhurst
@chrisbrockhurst 6 жыл бұрын
Haha nice pun! I don't turn it off, haven't ever had a problem with leaving it on to be honest with you. Ahhh well you taught me something about the smell, all the fun stuff is bad for you eh haha
@kimwong2053
@kimwong2053 6 жыл бұрын
On my Weebill bill I also can not balance the “lens up” tilt if using the manfrotto RC2 quick release. I use it anyways as not having a quick release really defeats my workflow. I am hoping there is a solution to this. I thought about maybe getting a manfrotto 501PL and omitting the Arca Swiss mid plate that comes with the Weebill to lessen the top heavy weight. I have yet to try but if someone figures out a solution I love to hear.
@jnxilianzhan1192
@jnxilianzhan1192 5 жыл бұрын
For Weebill,I have some not very good ideas,the first is about the APP.the Android version is too terrible,second is the button design is very easy to make a wrong operation,Third is about the function menu,you have to save something and then go to next step,but that isn't you want.....I want to return my weebill....
@GujInfomedia
@GujInfomedia 5 жыл бұрын
Improve your lights in room....its look like very dark
@UncleAlpha1
@UncleAlpha1 6 жыл бұрын
Chris, the smart phone holder is great for a 2nd second screen to you see yourself while vlogging.
@chrisbrockhurst
@chrisbrockhurst 6 жыл бұрын
Agreed, I'm not adverse to trying it out, just seems a bit much of a novelty. Maybe once I have used it I will change my mind
@jdolo829
@jdolo829 5 жыл бұрын
Hard for any Sony shooters to want it when you can’t transmit video to it yet 😩😩 or atleast I haven’t been able to from my A6300 to my iPhone the ZY app
@shwork6699
@shwork6699 5 жыл бұрын
WHERE THE FUCK are those ''Tiny little adjustments'' 15:19? I just can't find what are you moving.. please help
@vancourverite7779
@vancourverite7779 5 жыл бұрын
wheres the axis????
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
?
@vdstoddy
@vdstoddy 5 жыл бұрын
tks dude! subscrived
@andyfrancolive
@andyfrancolive 5 жыл бұрын
¿¿¿And???
@seken2nun
@seken2nun 6 жыл бұрын
👍🏾
@FarooqAhmad
@FarooqAhmad 6 жыл бұрын
❤️️🙌
@Brad_Smith_Media
@Brad_Smith_Media 6 жыл бұрын
That's what she said lol
@chrisbrockhurst
@chrisbrockhurst 6 жыл бұрын
yes!!! couldn't resist haha
@OzSlowly
@OzSlowly 5 жыл бұрын
Black on your black T shirt and crappy lighting - impossible to see...!
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
Ozslowly.com turn up your brightness. My shirt is red.
@OzSlowly
@OzSlowly 5 жыл бұрын
Chris Brockhurst, which proves my point........! Screen is already as bright as it gets.
@trakyaunited
@trakyaunited 5 жыл бұрын
Your video too much contrast too dark i cant see clearly!
@chrisbrockhurst
@chrisbrockhurst 5 жыл бұрын
Trakya Cumhuriyeti must be your screen, try adjusting your brightness
@trakyaunited
@trakyaunited 5 жыл бұрын
@@chrisbrockhurst Im using iMac 5K retina display okay? Your shirt is dark gimbal is dark too much darking area understand?
@Lexanfilms
@Lexanfilms 6 жыл бұрын
All these features are cool, but it can't stabilize footage for shit.
@chrisbrockhurst
@chrisbrockhurst 6 жыл бұрын
You can't of balanced it. Mine works great
Zhiyun Weebill Lab Gimbal - How To Balance Your Camera | Momentum Productions
12:20
Zhiyun Weebill Lab Setup and Review - Everything you need to know!
11:27
Sigma baby, you've conquered soap! 😲😮‍💨 LeoNata family #shorts
00:37
Weebill Lab - More Thoughts After 3 Weeks
9:37
Se Park
Рет қаралды 20 М.
Zhiyun Weebill Lab Gimbal // First Look and Review
12:46
Dunna Did It
Рет қаралды 54 М.
Zhiyun WEEBILL LAB Review and Sample Footage
8:28
Jeven Dovey
Рет қаралды 105 М.
Top 5 Zhiyun Weebill Lab Accessories
10:18
Jake Sloan
Рет қаралды 47 М.
Zhiyun Weebill Lab Review - Return or Keep It?
7:09
Se Park
Рет қаралды 27 М.
How to Balance Zhiyun Weebill Lab in 3 MINUTES
4:40
Oma Ghomrawi
Рет қаралды 68 М.
Zhiyun Weebill Lab [Review + Test Footage]
9:43
Brandon Li
Рет қаралды 190 М.
The Best settings - Zhiyun Weebill Lab
5:06
Lee Zavitz
Рет қаралды 34 М.
Setup Your Zhiyun Weebill LAB
6:23
ZHIYUN-TECH
Рет қаралды 54 М.
Sigma baby, you've conquered soap! 😲😮‍💨 LeoNata family #shorts
00:37