8:58 This bit is what sets you apart from all other reviewers. I cannot even think of a way to find out what the problem could have been, and yet again you found out and came with a solution. You are something else!!!
@TaistoUuslail4 жыл бұрын
All makes sense. I've used F8 and somehow have enjoyed the menu features and signal routing over the 788. It is idiot proof in a way. According to F6 I have been wondering about soundbag compatibility, but Mr. Judd answers that question already. So - thanks for the details! Great work!
@brynocerouss5 жыл бұрын
I enjoy your content more than anyone else (even when I really don't have any idea what you're talking about).
@danielgarcia92864 жыл бұрын
This is the best video for the f6 I've seen so far! Got mine for film production and music production. This video made me realized potential. Thanks!
@chrishogben52825 жыл бұрын
I don't know if you rehearse/script your dialog, but goddamn do you appear to flawlessly spout such indepth, consise and well written/spoken insight and understanding about your subject. It's so good, I always learn something from your videos and secretly wish I could sound so knowledgable.
@curtisjudd5 жыл бұрын
Thanks Gerald - nice coverage! I'm sticking with a dedicated audio interface for myself. But for many, sharing the device for both field recording and computer interface is totally workable. I'd probably go for the F4 instead of the F6, though, since the F4 has balanced outputs at the cost of a larger/heavier unit with a mediocre screen.
@geraldundone5 жыл бұрын
Cheers, Curtis!
@satsahota17655 жыл бұрын
Would you gentleman recommend the f4, f6 or mix pre 3 ii? Use case is interview work with an EOS R and rode wireless go lav setup. Thanks in advance, love each of your work 👍🏽👍🏽
@curtisjudd5 жыл бұрын
@@satsahota1765 Yes, all of them would work well for that use case. Perhaps the F4 would be my preference since it has automix capability plus balanced outputs and better spaced/sized controls.
@keevmah52594 жыл бұрын
@Curtis Judd @Gerald Undone are you able to utilize the usb interface for live audio output? And utilize software(ie Pro-logic) to mix and monitor?
@RichardsWorld4 жыл бұрын
@@satsahota1765 I just got the F6 and used a wireless mic system. I noticed if I use a self powered mic system it has it's own noise which is much greater than the F6. For a very pure sound try to use a mic that doesn't have added gain like a wireless system, or like a Rode Videomic NTG.
@thekarmafarmer6083 ай бұрын
Im kind of blown away by how thorough this video is, and also realised that mh hnit did not come with batteries. Perhaps only certain countries get them. Thanks. Excellent
@zkcl755 жыл бұрын
Did making this video hurt your brain as much as it did for me to watch? I had to view it 4x just to consume everything you said. Thanks for all the detail and hard work you always put in!
@oriomenoni76515 жыл бұрын
When there's something video related that I don't know, or need to understand, Gerald Undone's a straight shooter for me, I've never been let down once. The downside of this is that sometimes he upshifts to Nerd Warp acceleration mode and things then become arduous.
@alexjcorona26055 жыл бұрын
Honestly, the amount of knowledge you have is insane. Thank you for all of these videos
@SoundSpeeding5 жыл бұрын
Welcome Gerald to the Zoom F Series family! When the original Zoom F8 was first released it was a massive GAME CHANGER for the location sound world! Arguably nearly comparable to what happened when Nikon D90 came out and turned the camera world upside down. (but nobody appreciates the magnitude of this, because sound gets ignored....) I reckon everyone who even slightly cares about audio should get at least the Zoom F4 / F6, they're such a massive massive improvement over anything cheaper than those. Or go for the Zoom F8n instead if you're taking it slightly more semi seriously. Spending more (such as for the Sound Devices 833, which I own myself, a fantastic recorder! Arguably the "best" small form factor baggable field recorder on the planet) is only worthwhile if you're working at this full time. Interesting note about the F6 timecode vs BMPCC4K, as the Tentacles send TC/scratch over L/R stereo (L=TC, scratch=R). Seems weird that Zoom didn't embrace doing it the same way as Tentacles, as they're the only other ones which send TC over stereo @ mic level.
@devtank4 жыл бұрын
Ive always had dedicated audio recorders, starting with cassette tape recorders, and Ive kept that up until recently. My kits are based around a Zoom F8, and two handheld's. I like dedicated tools for the job, but recently I heard about the Mixerface from CEntrance, which is basically a battery powered USB XLR dual channel premium analogue pre-amp, with built in recorder. In of itself the recordings are fixed at 24/48kHz which I isnt the 24/192 that I prefer to use on the other recorders. However, because its an analogue preamp with a USB out, you can record into a computer at whatever resolution you like. You can also record onto a phone with an app that allows recording from external mics, something like TwistedWave or Ferrite and you basically have epic capability in your pocket. I love it because its a metal box with no screens or displays. Its super simple, and the recordings I've made with it are as good or better than my other recorders. Its small, compact and my binaural field kit with mics setup in ORTF, everything fits in a small case.
@adventure_photo5 жыл бұрын
I gave a thumbs up even though I barely understood anything you said! I like how you really dig in and give very thorough explanations! 👍
@chrisso19734 жыл бұрын
Incredible level of information! So useful and very much appreciated. You’ve answered all my questions and many I never even knew to ask! But how the hell do you retain all this in your head? You’re a genuine phenomenon, Gerald Undone!
@goodeggproductions5 жыл бұрын
I definitely appreciate devices that can do a whole lot of things and replaces dedicated devices that complicate things. Case in point: A friend and I used to do podcasting. We had a TASCAM field recorder, a 4-mic mixer, and a headphone breakout box splitter so that everyone could hear the output. Then RODE goes and creates the RODEcaster Pro. This does everything our three components did and much more, with podcasting studios in mind. And at $600, it wasn't much more expensive than all the components and cabling we had to purchase to get everything working. I own the F6 for a couple of reasons. I record multiple input gaming sessions where everyone is mic'd. For years, I was using a TASCAM DR-70D and a DR-60D together when I had more than 4 voices (most of the time). And even when I was using the same recording settings on both devices (24bit and 48kHz), I would get drift between the two. It was slight. So slight it drove me nuts. I'm talking about .04 seconds per hour recording. No big deal, you think. Except that you could hear one person on one box in the mic of another person on the other box and everyone started sounding like they're in a bathroom. Since these recordings would sometimes go for up to 2 and 1/2 hours, it would get very noticeable. Easy to fix, but the other problem with TASCAM is that they have no safety recording. If the power goes after recording for 2 hours and 15 mintues, you lose THE ENTIRE AUDIO FILES. So the F6 solves these problems and also helps for my short film work where there's no such thing as clipping any more. Or recording too soft and wrecking it with a noise floor. I love the little thing, but your analysis of how to get it to do things flew about 35,000 feet above my head. I'm more of a camera guy. Sound is just a foreign language to me. Great video though. I'll have to watch it a few more times to understand all that stuff you were doing in the menus.
@PaulKentSkates4 жыл бұрын
By biggest issue is that the bottom mount is in a flexible plastic spot on the body. The marketing material claims an aluminum chassis, but not so on the underside. I can't mount even a small mirrorless camera without a bunch of bobbling, flexing and worrying it will damage the recorder at some point. It also doesn't have enough clearance for my manfrotto fluid head. And honestly barely enough for my acratech Arca-Swiss style plate/clamp on my ballhead. I will be making a plate to reinforce the bottom and to boost it so I can attach it to a tripod without having the strap rails from resting on tightening knobs for the base plate. (That also causes it to flex and not sit level). This one issue seems like it wasn't tested before going it was cleared to go to market. Everything else is pretty darn impressive though. Luckily for me, one of my KZbin channels is centered around CNC machining technology. I have the ability to fix it using a CNC machines. But most do not. Maybe I'll send you a copy of the booster plate once I am done making a few.
@joshuadtaft5 жыл бұрын
I'd say a combination of both. If it's not going to move, get something specific, if it's for the field, one or two options could work. I have a Zoom F1 for most of my field recording, but I also got a Zoom H6 for heavier duty stuff, which is currently being used on my computer as an interface. Eventually that will get replaced with a dedicated board for audio. One device to do it all isn't always going to work, but a few will cover most all bases.
@phillipnichols48595 жыл бұрын
I think the perfect example of consolidating devices is the smart phone. I use my Tascam DR10-L like it’s a gift from the Gods. And my camera only uses one lens, the 24-105 f4 from Canon. I guess I’m all about making gear do as much as it can before adding more equipment to keep track of.
@bennybbergeron4 жыл бұрын
I use the glidecam ultrashot for 90% of my camera rig needs. It's an obscure product that never really caught on, but I love that it works as a shoulder rig, stabilizer, monopod, hi-hat and even for jib type shots. For certain situations I use a tripod and slider, but if I'm only bringing one support system to a shoot it's the ultrashot.
@mybabysattire58574 жыл бұрын
My cousin just told me about the F6 and sent me this link. I really like what I saw! I'll take the chance with a one-stop-shop device like this. Thanks for the video!
@gillesmatheronpro4 жыл бұрын
With all those details about timecode and menu tweaks... it is, once again, a great video ! Thank you.
@PaulStephenson0035 жыл бұрын
Gerald - the company that changed the game for me in the audio recording and studio gear space is Metric Halo. Not specifically a replacement for the device you reviewed here - it's rack mountable and different use cases. If you need a swiss army audio interface in the studio and want to know that next year they won't replace your gear with new gear and leave you behind + offer an unbelievable performance:cost ratio, check them out. Ex. 15 years after purchasing a 2882 model they released a FPGA digital hardware upgrade to the device. 15 years still supporting the same hardware with DSP processing upgrades.Internal mastering level plugins using the FPGA with complete audio routing and digital effects drag/drop canvas, internal 80bit mixer, and the list goes on. Hands down the single best purchase in the studio ever. I don't work for them :)
@halfphild5 жыл бұрын
This is dream team gear for me. Period. The 32bit float magic. (I know other tools can do this as well) Zoom has yet to really let me down. Great stuff as always, Gerald. Cheers.
@remektekmedia66415 жыл бұрын
Hey Gerald, here is a tip: In the Routing screen, if you hold down the PFL button WHILE pressing the Left/Right buttons, they will move the selection UP/DOWN. This makes faster navigation.
@geraldundone5 жыл бұрын
Oooh, nice! Thanks for this one.
@quebical5 жыл бұрын
Sorry if someone else has proposed this solution for your audio drift issue: PluralEyes by Red Giant is AMAZING at syncing footage w/audio and auto fixes any audio drift. Huge time saver to boot all the way around. Well worth it. - Since you edit with Resolve you'd just import the .xml file PluralEyes gives you.
@FunkyDaddyO5 жыл бұрын
"I'm Gerald Undone, and I'm sending a gift to this guy. Seriously surprised nobody has had me say this before."
@MylesNW5 жыл бұрын
Perhaps suggest getting a 2-channel passive direct box to go from unbalanced out on the Zoom to balanced in on your studio monitors. If the noise you mentioned is induced environmentally to the unbalanced cable run, then this should help a bit; just keep the unbalanced Y cable the shorter of the two. Thanks for making such awesome content!
@shagral_5 жыл бұрын
I understood about the same percentage of this video as your audio drift
@geraldundone5 жыл бұрын
🤣🤣🤣👍
@iComplainer5 жыл бұрын
And, like me, watched it in its entirety.
@Theworldisforent4 жыл бұрын
His voice just lulled me away to oblivion
@NikosNisyros4 жыл бұрын
+1 🤣
@JeahnLaffitteAdventures5 жыл бұрын
Bruh. You’ve been pumping out the content lately! Thanks for all your hard work! You mad lad. Excited for this new little gadget!
@pebmets5 жыл бұрын
Thank you for the video. This review like all of your others was informative as well as useful. I can live with something that does a very good job with many things instead of carrying many things that do a great job. Another great video. 100K by the end of Nov.
@asmrdestiny4 жыл бұрын
So looks like the Zoom F6 has a bad USB related bug that I recently discovered - in USB Stereo Mix Mode, the audio signal from the recorder will drop in pitch and even delay by a half to 1 second when listening to it on the PC. I've been using it to stream on Twitch over the past few weeks and it does this at least once on every stream which requires me to exit USB mode and re-enable it on the recorder. I've tried different USB 3.0 ports with no change as well as updated the FW to 1.3. Next I need to rule out using Streamlabs OBS, my USB-C cable, and try different XLR mics from the equation. If those aren't it then I'll be contacting Zoom about it.
@gkochanowsky5 жыл бұрын
I really like the image you are getting out of the pocket4K.
@JoeMustang995 жыл бұрын
Working with Kasey for a short time must have inspired you to continue with your high technical excellence with a tremendous amount of information in a short period of viewing time! Great video on the F6 and I'm not even in the market to buy one, since I have an MixPre3. I just wanted to see how you liked it. You and Kasey are on opposite ends of the KZbin spectrum, and I am glad you are both doing what you do, and I love they ways each of you run your channels.
@doityourself9499 ай бұрын
The time code and pocket 4k bit is amazing. Thank you. Always fun to go back and watch your long hair videos.
@gkanai14005 жыл бұрын
If you want better quality output, you can go from the unbalanced 3.5mm to a stereo DI box (Whirlwind PCDI, Radial Engineering Trim Two or ProAV2 or Stereo JDI). Naturally you'd want the cable from the F6 to the DI to be short and then use XLR to your monitors.
@stereointellect3 жыл бұрын
Thanks Gerald, F6 it is for me… I need another audio recorder after my pro tools setup for KZbin … I wish I could use just one interface but having a second to just record my continuous vocal while starting and stopping pro tools is a must:)
@dalerobinson84565 жыл бұрын
Camera Conspiracies brought me over, thanks for helping our little buddy Kasey. New subscriber.
@ChannelWright4 жыл бұрын
I’m all for consolidating and simplifying these days - so tired of hauling multiple cases! The zoom F6 is a big part of this - and I no longer need to wear a vest to support my sound bag because the F6 is so light! Simplicity! Yay!
@matthartman70622 жыл бұрын
The audio drift might have something to do with the CMOS in your computer. Try to reset or change the CMOS battery. Or, try to record on a different computer to see if the issue persists. I know this video is several years old, but just in case anyone is having similar issues.
@ThriftyAV5 жыл бұрын
You mentioned that this accepts line level inputs, but unlike your explanation of the outputs, you did not specify if the inputs will accept +4dB or just -10dB line level. I have avoided the otherwise handy and affordable Zoom H4n due clipping problems when being fed a pro line level, as I sometimes want to record audio from pro mixers. Thank you for your detailed review. This is the most info I could possibly get on this product in under 11.5 minutes.
@reginaldworthington75585 жыл бұрын
It can’t by its nature be everything to all people or, by extension, all recording situations. So it’s primary function is as a field recorder and the form factor is so it tucks in nicely under various cameras without being too unwieldy on the tripod. The unbalanced output is a bit of a phoopah in my opinion though. They could have added that fairly easily and would have made direct preamp use so much better. Well, they have to leave something to upgrade on the next iteration right? That and the timecode assignment I guess.
@JasonMcNamara5 жыл бұрын
I own a LOT of Zoom gear myself (1xF4, 3x F1, 1x H6 & 1x H4n) so I’m pretty comfortable with their layouts. I’m looking forward to picking up an F6. I did a video on the F1 units in Tokyo myself back in January. What I found hard about your video was that you went sooooo fast that even me as a user of Zoom gear got lost. I get you wanted to keep the overall time down, but if you had of slowed down your delivery by even 10% it would have been easier to keep up. That said, you seriously know what’s up with the equipment so I’m not knocking you. Just please slow down a touch to make it easier to process your fantastic insights. Peace ✌️
@Lanka_Wildlife2 жыл бұрын
Why not slow down playback on YT
@JayLippman5 жыл бұрын
I've been looking at the F6 since I saw a review on it a few months ago and now I really want to add this. I'm in a small space, so the all in one solution is something I'm a huge fan of. I currently use the Zoom H4N pro to record audio for my tutorials. It allows me to record to my camera and my computer at the same time, but I lose the ability to also run headphones out of it. The F6 would definitely be a step up for me.
@donf29445 жыл бұрын
Maybe someone already said this but, unbalanced outputs are fine for noise performance. Balanced cables sometimes allow a signal to 6db hotter, but other than that shouldn’t really make any difference in this case. The telling thing here is when you said adapting to balanced cables helped noise performance. That implies you are plugging into a balanced input that needs to be adapted specifically. Some balanced connections want pin 3 floated, others want it grounded. As for the drift you are still seeing on the time code locked audio, I suspect that is due to your adapter solution. Shorting two channels together like that affects the output amplifier and it’s anyone’s guess what that yields in this circuit, but I think one symptom has been found. The real solution here is a crossover, or polarity flip cable. Just a short cable with the pins cross connected. Check out Redco Audio for audio cables. They will make you anything you need to custom spec, at higher quality, and it will usually be cheaper. Try using the custom cable page for the bmpcc4k xlr adapter cable. Way cheaper. Studio engineers have been using red o for years.
@Sosha6662 жыл бұрын
Monitoring, midi, digital, word clock, surround. Depends what your doing. I Have used the f4 as in interface out and about for picking up voice over where people need to see picture and it does the job fine short of critical listening ... , though you can always go through an amp. Can’t remember what it was like for mixing direct input monitoring and playback. If you don’t have an interface, then it’ll be fine because you’re not missing any of the features you won’t have and the pres will be probably better than a lot of the Lower end interfaces because that’s where their focus is.
@The_Daliban3 жыл бұрын
Ok please make an audio series where you teach the ins and outs of good audio quality. This would be tremendously helpful. Your sound is ON POINT
@PowersBenzoCoaching2 жыл бұрын
I'm using the f6 with the Sennheiser MKH416 and the noise floor is atrocious! -35db, any suggestions? Using 32 bit float!
@boasschowalter9983 жыл бұрын
You should try a di-box for your monitor output, that could help.
@jayphilipwilliams5 жыл бұрын
Keep the sarcastic "if you did not like this video" comments coming! Love 'em!
@anstef14854 жыл бұрын
As an audio amateur, I find you go into so many details so fast that I cannot fully appreciate whether this unit is useful or not. What I retain from your video is that for musicians this is not very useful by itself, but needs an audio interface that can recognize and process instrument signals directly (guitars, keyboards).
@DJSkippy5 жыл бұрын
Another solid video. Still enjoying your highly technical aspects of the gear and software you breakdown. Thank you!
@jonathanbtodd5 жыл бұрын
I travel quite a bit and often have to carry everything in a backpack or a pelican 1510. I always prefer one device that does several things, even if adapters are needed. The F6 is high on my want list because of its versatility.
@plattinummedia5 жыл бұрын
Something isn't right... I have notifications on but I didn't get a notification... Thankfully I saw this in my recommended! Anywho, potenial video intro: "I'd rather have my city burned down than hand over my pistachios" (One of my teachers said this in my literature class)
@PBentz285 жыл бұрын
The way you described that last question about multiple devices vs one with accessories/tweaks sounds exactly like the debate between a rigged up small camera vs an fs7 c200 style camera. I fully understand that appeal when it comes to price, but I often think the drawbacks outweigh the benefits of rigging up small cameras to do bigger jobs. The bmpcc 4K/6k and zcam seem extremely close but sometimes SDI or balanced outputs are must haves.
@charliehinde17015 жыл бұрын
I think it's fair to say Zoom designed the F6 with Filmmakers in mind rather than musicians, which of you're a Location Sound Recordist like me...is a very nice thing
@scourneene Жыл бұрын
My experience is that I'm new to recording. Learning as I go with the hope that I find the right equipment to record live music, play live through, possible pod casts, live stream. I thought I'd start with a mixer/interface and bought a Soundcraft 12fx notepad. I'm so new to all this I can't wrap my head around this thing and apparently it doesn't send any fx, EQ settings I established on the mixer to the DAW. It sends it as one track. I thought it would be my "one in all" but more so in theory. A friend of mine who is a professional sound engineer thought the Soundcraft was too limiting. He uses the Zoom F6 and recommended I look at, so here I am. I'm still on the fence but badly hope to find that "all in one item", I don t know if this is it or not. Going to research more or I just give in and buy a separate interface, a small mixer for live stuff, and my loop pedal. I don't get why most interfaces at entry level are just two inputs, I need three or four at least. Why I sort of warmed up to the Zoom F6. So for recording instruments you can't plug straight in, you gotta run a mic to a speaker and record, I'm so new to all this obviously. Feeling a tad over my head but learning as I go. Thanks for a great review.
@hoodaffairstv5 жыл бұрын
was going to get this anyway but you definitely came right on time with the TIPS & TRICKS
@ScottJWaldron5 жыл бұрын
The only consolidated device I can think of off hand is my cable modem router combo. The major drawback is that the cable company is the one that controls firmware updates. other than that it works alright. The first time I saw the previews on the Zoom F6 I was wowed (I don't know a ton about audio). That float recording with backup would be amazing. I've tried putting a Zoom H1 between my camera and mic but get an offset between what the Zoom records and what the camera records, which isn't ideal so I don't bother. Right now just pushing to the camera seems sufficient for what I do, but eventually something like a F6 would be nice.
@michaelrmarak55972 жыл бұрын
F6 is designed for pro, but outputs are home audio output; surprising. I face problem with all Zoom mixers and recorder. There are something lacking in them, always. But I love all Zoom Recorders. I am with zoom for its recorders.
@briandipierro88655 жыл бұрын
The Zoom F6 definitely seems like it'd be good for some live recording of bands, too. That's definitely a bonus.
@tonyvernon89085 жыл бұрын
I'm Gerald Undone , Europeans are advised to play at .75 speed to get all fruits of my presentation.
@Theworldisforent4 жыл бұрын
Easier to watch with the volume off...just read the subtitles or rather turn the screen blank and listen to the tutorial 😄
@ThatRandomHippie3 жыл бұрын
Honestly I feel .5 way more pleasing!
@jaydivina5335 жыл бұрын
Well it let you drop audio drift sync steps and let you do everything else worry free. So it technically does everything :P A real good tool indeed and sure beats the bird nest of wires to mulitple devices. Thanks Gerald. You found another gem for the studio.
@JamesClark19915 жыл бұрын
Could the extremely small audio drift be caused by recording audio at 48kHz and the camera recording at 23.976FPS instead of true 24fps?
@AlexKeller14 жыл бұрын
1:22 Have you tried the "turbo" button?
@Dudelstudio5 жыл бұрын
That audiodrift is something that is usually not the interfaces fault. This happens everytime to some degree when 2 sources are recorded with their own clock. Only thing that could prevent this is a stable timecode between the camera and the Zoom F6 for example. You could also try to feed the Audio Interfaces Signal back into your camera while shooting. This way you would have everything in sync although there might be considerably worse audio fidelity since you are going thorugh another DA/AD and Camera Audio (even line level) is never as good. There is the Tascam 701D Recorder that has an HDMI in that you should be able to sync through while recording Your MIC Signal at the same time.
@ive5955 жыл бұрын
I’m Gerald Undone.....’your only supposed to blow the bloody doors off!’ In your best Cockney accent.
@PeteC625 жыл бұрын
Let's hope it's better than Camera Conspiracies' Gordon Laing accent!
@oldwave15 жыл бұрын
I use a breakout cable by hosa stereo male to dual mono female and it worked perfectly However on my breakout recording I had some issues with the Bluetooth app that crashed the recorder briefly and had to record the second half of the show with out it A few firmware tweaks. I was on the fence with the new mix pre but 1000 for 4 channels versus 650 for 6 sold me. Nice unit and I like your tweaks keep up the good work. This was with the bmp 4K by the way
@ChristopherIan5 жыл бұрын
Love your videos here but i always wondered... what do you use your gear for exactly? do you make films? why no links?
@MichaelWarthStudios5 жыл бұрын
Insanely informative, thanks for another detailed review.
@topside25 жыл бұрын
This should be your demo reel as a product rep. Send this to QVC or Amazon. You’ll be hired that day!!!!
@adriancluskey3640 Жыл бұрын
Not sure if an update to the camera or recorder but the time-code sync's over normal stereo cable now, not need to use an adapter.
@thatcherfreeman5 жыл бұрын
I often see people on KZbin looking for a camera that can do both stills and video/vlogging and it seems to me that it's generally much cheaper and easier to get separate devices for those things.
@jsimes15 жыл бұрын
Hmmm the F4 has two balanced XLR outputs and the inputs are XLR as well as 1/4 inch. But it doesn't have the 32-bit float which looks sweet! I've run a folk club for years and I have used many different Zoom products and have always loved the sound quality I get from the preamps.
@MoronMonkeyPro5 жыл бұрын
I think it's great you've made it into a great hack solution for your one fits all needs! I'm all for re-purposing equipment in every way possible. I rarely have criticism of your videos - I love all your in-depth and amazing analysis of products and gear. However, I think it's fair to say I was hoping you'd talk about the experience of using it on a set, and in conjunction with a camera (or even a separate operator for it as well). Regardless, I'm extremely thankful for the content you put out, and thank you for sharing your thoughts! Keep rocking!
@geraldundone5 жыл бұрын
I hear that. I figured I'd leave that to the location sound experts and focus more on the computer stuff that I'm into. Hopefully once all the videos are out, mine will offer useful, but different information. I try my best with audio, but I'm definitely not as experienced in the field with it as other channels.
@MoronMonkeyPro5 жыл бұрын
@@geraldundone Great outlook on it. I only suggest what I do because I know you'll put an great deal of thought and analysis on your feelings about it before sharing it (in great detail, no less). Again, still love the content!
@MrHamit646 ай бұрын
Hay friend. I just bought 1 off a friend. Yes I too like the sound of the F6 for multitracks and stems. I can't talk about other interfaces as I haven't heard many but compaired to the other H recorders I have everything you said is true. The H recorders though I found a bit brighter and harsher. But the F6 is studio sounding. I'm blind as is the friend I bought it from but as the app has lots of the functions to it we can once paired pretty much use the F6. Same from what I understand goes for the F8N Pro. I'm surprised at the record quality of these recorders. It's like the good old trusty Sound-Devices 744-T $4000 recorder.
@TylerCinema5 жыл бұрын
Let me say this, as a guy who has been playing guitar for years. Never ever plug your guitar straight into your recorder. You want to have your guitar and effects go through your amp, that gives you most of your tone. Mic your amp and then record the amp with a mic that uses XLR.
@learningideas2 жыл бұрын
Gerald, great work around. I didn’t know the F6 was that configurable in the settings menu (and I’ve owned it for 6 months now). You’re crazy smart. Oh, also glad you got a haircut lol
@504507203 жыл бұрын
Fantastic device from zoom, and great value compared to sound devices mix pre series, I'd say its 95% perfect, a v2 upgrade addressing the balanced outputs, and the lack of a mic level output to camera would make it the ideal recorder for most videogrophers needs.
@JackVania5 жыл бұрын
Duuuude, super late to this video - thanks for putting this together. Been interested in a new FR and this is a great breakdown. Thanks, Gerald.
@504507203 жыл бұрын
Awesome info again Mr Undone!
@LaRobertos5 жыл бұрын
just bought one for our channel and can't wait to try it
@benjamin_lecomte5 жыл бұрын
i have a Yamaha MG10XU for home with on it, my monitors, a wireless Sony interface/headphone, a imput for my phone, 2 xlr mic imput, i have my second pc in imput on it and i wired headphone also on it. So 2xlr imput in, 2 other free, 2line on it and 1free and 3 output all controled independently. it's my monster, but when i have to record on field, it's only me or 2 people for interview so my mixerR4R is just perfect as light and small it is but so well made with crazy silent pre-amp, only thing i would had to it is a meter that tell me more than i peak or not and the possibility to record the line input on a channel rather than in stereo.
@iswiu2bl5 жыл бұрын
My answer. One that is capable of mant things. Perhaps it is that I am not an engineer. Thanks for very straightforward review!
@woodglove3 жыл бұрын
Never looked into this subject at all. Total novice to this stuff. Understood everything he said though. Good teacher 👏
@JuusoHoo5 жыл бұрын
huh!?!? so many words, so little time! speeded audio?.missed the point, you have so much info. Good luck! I bought the mixpre6-II as this was not available, I'm pleased. This zoom seems a bit tricky to me.
@marcelomoyano69185 жыл бұрын
Hey Gerald, great video, how this one compares to the Mix Pre 6? ... I have that one... should I switch to this one?
@stevenkralovec5 жыл бұрын
Marcelo Moyano I hear that the Sound Devices Mix Pre Series has better pre amps than Zoom’s. But don’t quote me on that-it’d be worth looking into more.
@JuusoHoo5 жыл бұрын
there is another audio out, like USB I think! The limiters on mixpre are GOOD and analog.
@dorianvocalartist2 жыл бұрын
'love your channel! I wondering, can I just take the 3.5 mm TC out and route it externally to an XLR input with the appropriate cables/adapters, then select that thus routed TC signal along with a selected track as scratch audio to the camera. So the camera would itself be recording the TC on one channel and scratch audio on the other. This would save the cost of a Tentacle Sync E for my Panasonic G85. (Of course I could just use the 3.5 mm TC out to one side and and half of the line out to the other, using adapters going into the camera - closer to what you described, but adding the scratch audio)
@markthomas80184 жыл бұрын
Good for making low budget movie? Just stalling while looking to see what F8n has over this.. Does either lose recording if batteries run out?
@remektekmedia66414 жыл бұрын
Great in-depth review. I bought the F6, but ended up passing it on to a friend and bought the MixPre 6ii. Would love to hear your comments about that range!
@TheGeoDaddy5 жыл бұрын
Same question (as I asked Curtis) IF you are using an Atomos Ninja V recorder for video (in my case, coming out of a Z6) would plug this into the Ninja V to synch the Time Code - directly - it still need the mono adapter... assuming you have some Atomos recorder and they all have the same inputs???
@TheGeoDaddy5 жыл бұрын
I have the H6 and I used it on a shoot.. one of the channel/inputs is shot (eight years old) and I had to take extra recording to pick up that 4th actor... so I may be looking for something that better fits my One Man Shooting operation.
@jidenshaotoko Жыл бұрын
Does it have balanced XLR inputs though? Or just the line outs are unbalanced?
@juliannevillecorrea5 жыл бұрын
Hello Gerald ! How do i sync zoom f6 as master output time code to gh5s flash sync bnc input to jam set the camera .. i am interested in gh5s + zoom f6 one woman crew
@teacx2000r2 жыл бұрын
Hi Gerald so I have watched your review on the Zoom F6 and the Sony XLR-K3M , I pretty much just do two channel audio right into the camera, would I get better quality using the XLR-K3m digitally or use the F6 going into the camera using the 1/8" cable?
@jayrey73 ай бұрын
This is a good one. I'm actually aiming to get the f6.
@ninomancuso7021 Жыл бұрын
Thanks for the in depth video, I wanted to know if you ran into an issue with noise when in usb multitrack interface? I notice clean crisp sound until I activate it, then background noise is suddenly introduced! I’m monitoring from te headphone connection on the f6
@oliverflint81733 жыл бұрын
I am still uncertain why I would want to send the sound from the F6 to the camera. I normally record both to the camera and separately to the F6, then sync up the F6 and camera audio in post, delete the camera audio track and link the video to the F6 audio. It's relatively simple and allows me to use Audition to get the best out of the F6 audio before syncing it up with the camera audio. Am I missing something here?
@EnglishEloquenceMoscow10 ай бұрын
Would it make any sense to get this unit for VO so that I could record whereever I want (my closet for instance) without having to deal with my PC fan noise or it's an overkill? Or maybe should I wait for the updated units that Zoom is putting out? Thank you for the great video!
@istvantoth7431 Жыл бұрын
Helpful video. Thank you!
@cristianlaorga75285 жыл бұрын
Asome video Gerald, i use the zoom H4N and its works perfectly
@TheGuitarWorkshop4 жыл бұрын
Hi Gerald from your review and other one done by Curtis Judd I feel that is not targeting musicians, it is very handy for the one chance recordings such as TV and Cinema productions which explains the neutral way it sounds No consideration for home recorders or studio ones which I can understand are we trying to find the impossible device that does it all as your fried of camera conspiracies ? I think I will wait for the 2nd gen or better option especially the sample rate is 192 kHz even for the Scarlet 2i2 while this one is restricted to 48 kHz If i earned money from TV field recording I'd definitely buy this but I will still have a dedicated music audio interface home Greetings for your good work, as usual !