Do you have a parts list somewhere? I want to do this exact build!

So minimal. I love it. This takes care of your needs while keeping almost the entire space to still use as a cargo trailer. Very inexpensive build so you can spend your money on key equipment and electronics. You could fit two full size motorcycles in there still.

How long will these run on a marine battery?

Hey friend, I’ve watched many of your videos and I’m am thinking of doing a conversion on my trailer. Do you have links as to were to buy solar kits, battery, trailer panels and ect?

Your fuel pump insulation for noise and temp control, try using rock wool. A little pricey but very effective in both uses. I also love the layout. The spartan use of space leaves it open to quick change of use. Very effective.

You've made yourself a good truck camping build IMO. Covers the bases on what you need without being more complicated than it needs to be. Just right.

How did you mount your spare tire.

I have 3 girls, so I need a California king bed.

I usually have 2 or 3 girls with me, so the bed won’t work for me. I have a 7x18 with a California king.

What is the metal trim material you used between the walls and ceiling?

Great information! I recently acquired a 6x12 cargo and will be converting it to a travel trailer. Looks like the high desert in Central Oregon

Thanks for sharing

Very cool, The Reflectix is the best thing since hotdogs. Love how easy it is to work with. Good job and very thorough walk-around!!!

The guy up the Street boughtl one just like that , he put two sets of bunk beds refrigerator microwave and air conditioner in it and has three Mexican girls living in it, they go off grid every weekend and sometimes for a week or two... He seems like a very happy man.... !!!

Awesome. Can you share who built this for you? :-)

How do you lock the doors and windows from the inside? Thanks!

Like the trailer tore Wondering where does your wife sleep you only had one cought

I like how it's simple but fictional

Nice job.

Hi. Nice setup. Do u have a cost for that build?

I’m jealous,everyone here has good knees

I might get a 97 f250 crew cab short bed 2wd 7.3 diesel. On a trade for my race car/old daily driver 2003 Subaru WRX. If it works out I want to find a bed cap like that and do something very similar for me and my son to start camping together. He's almost three so it's prime time to start taking him fishing 🎣 I can't wait for the memories we're going to make together. I also have an R50 pathfinder we did a ton of work too Including all new suspension and all terrain wrangler tires. The little suv is so much more capable than it's been in a long time. Rear seats fold down so we can camp in there as well if the truck doesn't work out. I wanted to do a small cargo trailer conversion build but I don't have anywhere to keep a trailer right now so all though cool and fun it's not really gonna work out how I wanted it to. Some day I want a small camper trailer. Like a 20ish ft pull behind camper. Some day 😂 we live on the Gulf of Mexico in Texas so a small aluminum boat is much more useful than a camper for us. With all the crazy flooding and weather in our area I could save us in a hurricane Harvey type event if we had a small boat. Hurricane season this year is supposed to be eventful 😢

This is the size I want to go with, except I want the barn (or double) doors for flexibility of use. Do you have any suggestions for manuals for adding electrical. I want to have a small air conditioner, as I occasionally need to keep boxes of food cool for a food outreach I help with.

Beautiful job ! Amazing time spent on small camper !

👍

Very nice tour of your electrical & heater details. Great build!

Does anyone know if its (i guess..) legal to rent these conversations out? Either through outdoorsy or your own means?. I cant find any info on it. And outdoorsy doesnt seem to have any conversations on their site. Which is surprising.

Excellent wiring setup

Built to your own needs, flexibility in mind. You also still preserved the ability to use it as a cargo hauler if needed.

I've had one for use in my RV for many years and have always been very happy with it. I'm not sure of the difference between mine, which does not have the model number suffix of AU, and the newer ones that do have the model number suffix of AU, but they appear to be the same unit.

Hi, Anyone know what size fuse the heater takes? I took it out, misplaced it, and now I forget what size goes in the wire harness. Thanks!

if you still have those tyres on your camper today.... they are past their used by date mate. just saying.

Love the Spartaness that perfectly fits your needs!

Actually, not all these are the same. This controler works with two different motherboards. And there are more settings as well not mentioned. This controler is capable of slowing pump speed to .8cps , not just 1.4cps. But you have to go deeper into settings to do this. Press * to enter time setting. Keep pressing OK until ____ 4 empty code comes up. Enter code 1688 to enter dealer settings. Off1 is timer start off2 is timer stop. Next is pump speed. To lower pump speed to lowest .8cps sett down arrow. But this will not fully work until next OK setting which is maximum pump speed. For some reason, pump will not achieve .8cps until max speed is reduced to 3cps. Why I don't know, because the original basic controlers you did not have to reduce max speed, but with this new controler it was the only way to get lowest speed. Next OK setting is minimum fan speed. Unless you are using on a high mountain, don't change this, or the next setting which is max speed. These settings change fuel air ratios. You don't really want to change these. Next OK is 12v or 24v. Next OK is 1 or 2 magnets on fan assembally. Next ok change entry 1688 code. You must keep pushing OK until all coding is finished for setting to be memorized. The new blue controler and motherboard only have 6 heat speeds and it's slowest speed is 2cps which is way too fast and too hot for smaller area to overheat. Plus 2cps burns far more fuel. 4l in 24 hours. You must have original mother board for all this to work. The newer boards will not do this. This controler can be used with both mother boards. Newer board can be identified by big plastic "H" channel on parts side of board. I find the lower speed setting much more useful when temperatures are mild 0°C to 15° otherwize it becomes too hot in cab.

Hi, buddy nice camper Can you show me how you made it lacquer from inside?

Santa is everywhere.

Nice build! I am curious more on your radio comms. I looked and did not see any videos titled around them specifically. Do you have any more details around the GSMR and hand helds? Product links?

This is a great build and a great explanation of what works for you. I've had my 6 x 10 v-nose trailer for years now and have left it as just a shell because it had to serve as my main storage solution for my motorcycles. Now that I've been able to build a garage I'm scouring KZbin for different conversion builds that will still allow me to haul a bike or two to events but add some comforts for the overnight stays at tracks or rallies. Up until now It's just been an air mattress on the floor of an uninsulated metal box with limited ventilation. Your Spartan design as you call would give me just enough amenities to be comfortable but still have that utilities space when I need it.

I have a F250 truck bed trailer with almost the same canopy. Want to build out the same set up. Do have any dimensions on the the wooden boxes you made? Also how is it secures in the bed?

nice set up. love the radio features for the walkies. good stuff

Thanks for the clear instructions!!

Do you know, is possible to use heater only as fan? In summer, for air circulation and cooling. Thank you.

Thx u the information was jsut great thxs

Propane cord not in my new one. Same model.

Great set up!! Question- what is the height of the camper shell? From the floor of the bed to the top of the camper. Thanks

Don’t know if i missed the weight

Dude! Great video!

Great, clean install!

I have a serious question about your spare tire mount. I would like to do that too. Are there metal studs inside the door?

Thanks for sharing!!! I really like it! It's nice and simple. Great job!!!