ils360

Пікірлер

@outersketcher 15 сағат бұрын

How long do you burn it? How do you know when its done?

@ils360 15 сағат бұрын

@@outersketcher You burn it until it stop smoking once it stops smoking you know it's done. Just make sure that your muffler is steel or stainless steel if it's aluminum or made out of a composite material you don't want to burn it

@outersketcher Сағат бұрын

@@ils360 thank you. I’m gonna try it on my poulan p4500 trimmer muffler this weekend.

@user-ez7db8rk4o 2 күн бұрын

THANK YOU KENNY!! I was just looking for information to help my fiend overseas he had problem with the full pump . I’m here in USA . Take some Eucalyptus tea at least once a day and shall help , if can find the leaves from the grocery store Att: hope

@eligiblesam5654 3 күн бұрын

Great vid

@ils360 3 күн бұрын

@@eligiblesam5654 thank you :-)

@daver681 4 күн бұрын

no offence but this is a pretty bad video because it was usually always too close up or out of focus

@ils360 4 күн бұрын

@@daver681 look at the year that it was filmed there wasn't very good cameras back then though I could make another video for you if you would like.

@2ndMomentumGarage 5 күн бұрын

What would the CFM ratings be on this?

@ils360 5 күн бұрын

@@2ndMomentumGarage I'm not sure honestly

@ronskeeters4319 7 күн бұрын

Have you by chance found an actual service manual for one of these?

@ils360 7 күн бұрын

@@ronskeeters4319 I haven't unfortunately.. what info are you looking for?

@ronskeeters4319 7 күн бұрын

@@ils360 I have the Cub Cadet Big Country version of this. I bought the machine (the engine was supposedly rebuilt) It idles okay and was running fair but has since lost power. I'm not sure if it is fuel/carb related or clutch/ belt related

@ils360 7 күн бұрын

@@ronskeeters4319 what are the symptoms? One of the ways to test if it's carburetor related is to slowly pull the choke out and see if the problem gets better if it starts to gain power and run better with the choke and pulled it then it's a carburetor issue

@ronskeeters4319 7 күн бұрын

@@ils360 Thank you for the info, I will certainly try that. I don't have to explain to you these are "slow lumbering" machines anyway. It seems as it should be going to higher rpm's to not only fall on its face but to decline in power as well. That make sense??

@ils360 7 күн бұрын

@@ronskeeters4319 yeah that does make sense It sounds like a carburetor issue there are different sections of the carburetor One is for idling the engine and the other one is for accelerating (simple explanation) And if one or the other gets plugged it will either idle great and not take off or only run while under load and won't idle I would definitely try pulling the choke while you're driving and see if that changes it if it does then the carburetor will need to be cleaned out. There's a possibility of a plugged fuel filter or failing fuel pump as well but I bet you it's the carburetor

@johangrannas4837 8 күн бұрын

I found this video one day too late.. but i still watched it to make sure i didnt miss anything. I got a tip from an old mechanic that id like to add here: Before cracking it up, run it in a ultrasonic cleaner at 70'c for a couple of hours. This makes the gaskets come loose easier. This video works just as good for a yamaha grizzly 350 2007. Also behind the cap you didnt open there is a springpressured steelball that can get clogged. This prevents the atv from backfiring when you turn it off. Thumbs up..

@audreyo5027 10 күн бұрын

Wait, this channel is still alive after 15 years? Also enjoy your break

@ils360 10 күн бұрын

Surprisingly so yes the channel is still alive and I'm still posting videos. 😁 Thank you

@sansmondemond1994 11 күн бұрын

Malheureusement on ne voit pas comment il fait

@scotw67 12 күн бұрын

I need a new pump for my pressure washer and am looking at the Yamatic. All still good with yours? Great video.

@ils360 12 күн бұрын

@@scotw67 yeah 👍 All is still good with mine, it works great!

@dancollins2546 13 күн бұрын

How did you end up liking the carb? Im looking for a decent carb for the 51

@ils360 13 күн бұрын

@@dancollins2546 The carburetor ended up working out great you can see in the video that it doesn't start but that was due to a scored up cylinder I didn't know about. After I put a new cylinder on it I tuned that carburetor and it works great no issues Just make sure you run ethanol free fuel through diaphragm carburetors The ethanol will eat them.

@dancollins2546 13 күн бұрын

@@ils360 thank you! I think il get one

@sNorENaDo777 13 күн бұрын

Dude laughs like Butthead and these idiots are the reason for Americans being evacuated constantly from Wildfires

@larrycassidy1702 17 күн бұрын

Great video

@ils360 17 күн бұрын

Thank you 😊

@rubuk2996 21 күн бұрын

Thanks for the video! I am doing shocks on my 4runner and ran into the same issue you had with the front lower bracket being barely too narrow to fit the new shock. You gave me the confidence to just bend it out barely yo get them to fit.

@Bruskoll 21 күн бұрын

Great video. But how did you put the pucks in?

@ils360 21 күн бұрын

I unhook the shocks and lifted the body up off of the axle It actually gives enough room to pull the springs out without having to compress them. If you're not able to do that though I'm sure you could jack up the rear end as high as you can put it on jack stands take the tires off and see if that gives you enough room that way

@Bruskoll 21 күн бұрын

@@ils360 is your van alive yet? I just saw the transmission went out…

@ils360 21 күн бұрын

@@Bruskoll yeah I made an update video on the transmission issue I think the video is called transmission can we fix it or something like that It ended up being a clogged filter after doing a service on it that came back to life and has been great ever since though now I'm starting to have issues getting it past local emissions I think the cheap catalytic converter it's not working out.

@Bruskoll 21 күн бұрын

@@ils360 I’m currently loosing power on my 87 4x4. It losses RMPs and the check engine light flashing on when it happens. My gas gauge on the dash is not accurate. Hopefully when I replace the fuel pump It will fix the lose in power and now stalling. The battery, spark plugs boots and distributor are new. Currently rewatching your video of the injector replacement.

@ils360 21 күн бұрын

@@Bruskoll have you tried checking your codes yet? All you have to do is stick a wire in a specific plug underneath the seat I've actually got a switch plumbed into mine just in case a light comes up while I'm driving... Definitely not checking them while driving 😉 It could also be a throttle position sensor or your mass vein sensor or whatever it's called I can't remember does your problem happen all the time or just once in awhile?

@AAa-qd8hb 24 күн бұрын

Will (Toro part number 144-6377 traction assist handle kit) (for new Toro Time Master mowers) fit on new Toro AWD 21472 mower? Both have same mounting holes and baby carriage shape.

@richardmorse5307 Ай бұрын

I learned a lot from your video. Perfect pace and explanations. Sure wanted to clean off that grime. Really good tips on revitalizing the start pull cord. Thanks!

@ils360 Ай бұрын

Thank you so much for your kind comment I really appreciate it and I'm glad I was here to help!

@binht4931 Ай бұрын

I got a 1985 with similar free play in my steering wheel. There a contact to get the same part u got?

@magicone9327 Ай бұрын

Use Maguires ultra shine when done. It will make the paint and plastic look brand new!

@magicone9327 Ай бұрын

That white oblong device in the carb fuel well should simply be pulled out if it’s socket, then cleaned! Easy peasy!

@magicone9327 Ай бұрын

They are both MM, 5/16 will fit 8mm

@nunie92 Ай бұрын

When installing the new the bell crank back into the bracket is there a special process since you had to use a press to remove it? I’m curious because I’m doing the same process and I’m going to send it in as well !

@ils360 Ай бұрын

Nope No special process of putting it back on Just put it in place and torque it down. Make sure to keep on the company to get the part back It took them far too long to get mine done but they're the only place to get it done.

@robstone8397 Ай бұрын

Whats the name.of the exhaust I need one

@ils360 Ай бұрын

I'm not sure honestly I'm sorry

@CrazyBritishbitch33 Ай бұрын

من فقط تمام خانه ام را آتش زدم و سپس مبلغ بیمه را دریافت کردم.

@CrazyBritishbitch33 Ай бұрын

Je pensais que tu étais peut-être mort mon pote, est-ce que tu parles encore à Wheely132 et 1972fordf150 ces jours-ci ?

@FuskyTheHusky81 Ай бұрын

Gotta love the good old youtube videos! I swear by running 32:1 and have never seen a seized motor or fouled plug. And run 12:1 in my old af lawnboy that says 16:1 lol they love it! Probably also helps they get a seafoam treatment every year.

@ils360 Ай бұрын

Thank you :-) I'm glad you enjoy the old KZbin videos thankfully they are still here and still helping people out with things. I also swear by using 32:1 there are a few newer things that I will run 40:1 but nothing lighter than that. Thank you for leaving a comment I really appreciate it

@MousetrapAndPepper Ай бұрын

just like the video about the wind mill "its funny how the persons avatar is a picture of the same event like its a mamorial or something"

@ils360 Ай бұрын

Yep it is my avatar that was actually done by KZbin back in the day when avatars became a thing they picked your most popular video at the time and used a screenshot of it. I wonder if it's the same story for the person with the windmill. And yes all these years later I still read my comments and still comment back whenever I'm able 😁

@MousetrapAndPepper Ай бұрын

Oh i never knew about that, I haven't been on yt back then so ye

@AlessioC-ft5zt Ай бұрын

😢😢😢😢😢😢

@shaunaromine3709 Ай бұрын

Help. The placement of this spark plug really is horrible. I dropped it inside while putting the new one in. There is no space for your hands in there. What can I do? I heard it go down, but I can't see or reach anything

@ils360 Ай бұрын

Oh shoot! You know what I remember doing the same thing and if I remember right I fished it out with a magnet on the end of a wire or one of those mechanic extendable magnet things.

@shaunaromine3709 Ай бұрын

I actually think it went under the fan....ugh. Not sure if it's worth the fix. You're video is great though.

@thee_crocodile3270 Ай бұрын

Strong material thick material strong engine its was made for life never loose such a great mower

@doesdoeselaar1360 Ай бұрын

Nice video. I have found 1 in a scrapyard. But looks like the engine of generator is stuck. Do you have some documentation for repairs??

@ils360 Ай бұрын

After doing the repair I found some documentation on the engine side of it. I've got a PDF of it somewhere. Best thing you can do is open up all the spark plug holes and put a mixture of diesel and marvel mystery oil down there before you start anything I'll let it soak for a week or two

@roadhousedelorean2630 Ай бұрын

Just the video I was needing to see. I just bought a 24ft 5th wheel camper. Only had the floor left on it. I removed that but was wondering how to Put the wood down. The angle iron sides made the light bulb turn on.

@ils360 Ай бұрын

I'm glad I was able to help :-) I've done a couple trailer conversions now and honestly enjoy doing them I am going to come out with more of this series hopefully soon finishing up the lighting the electric brakes and building drive over fenders from scratch.

@roadhousedelorean2630 Ай бұрын

@@ils360 that’s exactly what I’m doing with this one. The drive over fenders. I plan on hauling my sxs and xj on it.

@ils360 Ай бұрын

@@roadhousedelorean2630 Nice!! Will you be posting any videos on it?

@mattmiller5215 Ай бұрын

In a pinch ive used window washer fluid, but it will freeze in really cold conditions

@ils360 Ай бұрын

That's a great idea. I know they make a winter formula that will go down to -30 that's not a bad idea at all!