You talk to much

Doesnt work its a lie

I change the sensor on bank 2 sensor 1 , on the obd it’s showing no volts

That does not reset it.

Hi sir ill will try it

This fixed it after cleaning my throttle body. Thank you!

Guys! You Rock! The world needs more people like you to post these videos! Thank you for saving me a lot of money and getting me through a cold canadian winter morning!

Thanks for the info!

😮

I just bought them recently man. I will use them for mechanic work.

Jeep 2007 Red light comes up as soon i start the engine and RMP goes up & down and finally vehicle turns itself OFF. I changed throttle body, Thermal sensor, accelerator paddle, water valve still the problem remains. Please advice. Thanks

This is my latest updated response. As far as resetting the throttle body, crankshaft position sensor and many other components on my Jeep Grand 2011, V6, 3.6L, what worked for me was to disconnect negative battery terminal, use a jumper cable to connect both the disconnected negative car terminal wire to the connected positive terminal without causing a fire of course. Let set for about 18 to 24 hours as stated above. This will be the best verse 30 minutes which is not as strong of a rest procedure. Please do the 18 to 24 hour reset. Now, as far as the thunder bolt that I had, i fixed the issue by finding the 70 pin connected that is associated/has the gas pedal. It has a bolt the holds the pins together. It was strained and loose. The connector is found by the passenger side foot well lower right side. Remove plastic cover and there will be one or two of the strand square 70 pin connectors. Disconnect and spray contact cleaner. One of the pins resistance was 35ohms and should have been around 0.5ohm. That means that the connector for that pin was not solid and somewhat loose. I have no more thunder bolt after finding loose contacts. I had a stubborn thunder bolt that came back every week after I reset the gas pedal and throttle.

Bruh use black or green for ground wires

Those map sensors do not have any holders that’s how they came from the factory

Buy or borrow a bi-directional scanner and run the throttle body relearn program.

That worked for me

So I had recently called customer service but you have to claim the card as stolen or lost then it’ll give you options to choose from but the option you want to choose is “speak with a specialist” it’s better then nothing and my issue was resolved with a live person speaking to me. Hope this info helps those with their own issues.. never using green dot again 🙄

Helpful review

Use rewards after each positive action from your dog. Don't stop using the device, correct your dog nipping you by using a prong or e collar. One day he's going to cross the line and bite you.

Great video

Do you get to spend much time with him ? They act out when they dont get alot of attention.

When I changed the stock spark plugs in my 2010, at 59k miles, 2 of them were just about only hand tight.

I absolutely love the laundry on his ceiling fan! lol this man needs his own reality show.

We trying the pet gentle device it's pretty much same as your device

The sensor in the beginning of the video is not a mass air flow sensor, it’s a intake air temperature sensor, just for future reference 😉

Great job troubleshooting. Usually if you have a low M/cyl. & no leaks at the calipers. It might be the seal at master cylinder leaking in the booster. 🤙🏻 Sometimes if you have cruise and have a vacuum leak you can’t find it might be the brake switch for C/C.

I tried like 20 times didn't work then I tired the snap on scanner like this guy worked amazing kzbin.info/www/bejne/a56bgHePhrV6i9E

Should always use anti-seize on your spark plug threads especially with aluminum heads.

You have to use word commands as well. Otherwise the dog just hears a punishment sound but gets no direction.

My Jeep ran good until i took it to the dealer . They ruin it to keep you coming back . So i got rid of it .

Pulling teeth

Muy bueno el vídeo amigo, muchas gracias

😂😂

How much coke did you do before filming this

Doing ur video as u work would help better than showing after

How can I get it fixed

Bro I really wish u did the work and then did tutorials. It’s hard just listen to you without work. My Jeep is having th same Issue. I am Confused on how to fix it.

Dumbest review I've ever seen. It's not a miracle wand that you point at your dog and they will miraculously behave. It's a training tool to help with, you guessed it, training. You're supposed to use it to get your dog's attention when their focus is not on you. When they give you that attention, you have to reward them right away. Reward them when they stop misbehaving and pay attention to you. And to those who think it's "just a light", no you dummies, it uses an ultrasonic pitch of sound that we humans can't hear. Dogs can hear it well enough. That being said, I don't know how well this actually works because I'm still waiting for mine in the mail. I just though this "review" was moronic and had to say something. That is all.

Hey bro these issues are common on Mopar my 5.7 had the same issues replaced the throttle body started stalling after had lightning bolt ended up doing a re learn on the throttle and it works like new

genius

NUTTIN, “NUTTIN!” GOOD REVIEW!

Thanks!

I was against shock collars then I got a shock collar I only had to use it once to keep my dog off the couch but when my dog went after another dog it didn’t phase her she didn’t care I was about to buy this but now I know it’s just a light I’ll pass

Nice description. But you should video the repair work as you are doing it. Otherwise, it just becomes a lecture. Advice: Actual work on video really helps a lot more than just talking about it.

Dude you have to teach with command. Read the tutorial. Just by clicking isn’t going work .

Nooo. Simplemente cortar el cuadro, colocar 4 tornillos en un inserto al cuadro y queda como el que tiene del lado derecho

My jeep failed to relearn. I replaced pedal and throttle body. Still no solution. Very useless vehicle

I really don’t think the Brake Booster has anything to do with How the Jeeps idles ?

I am so glad I saw your review. I also have purchased one and I thought it must be my dogs. This does absolutely nothing. They continue to bark non stop. I have tried everything. Rewards when they obey. DIstraction. Ignore them. Whatever the barxbuddy is not for my dogs.

Very informative