I didnt look it was plug and play and sealed up and waterproof 👍🏻

Fox dropframe pro 👍🏻

Its an 85 but yea you can get 50’s

Holy smokes. Speedy recovery man deflections are not the one!

Hey bro, its the 72v 55ah dominator v3 from electron cycles 👍🏻

Fox defend kevlar bro

Good idea mate! I will give it a go! Great thinking and thanks for commenting!

@@stingyrogerr all good mate, keep up the good work. bike looks epic cant wait til mine is at that level.

6 days 👍🏻

You are incorrect. 30mph using only throttle only. I only rarely use the pedals to gain acceleration from 0-10mph. After that no pedalling. You just have to use the unlock procedure first that engwe can share with you its also available on youtube in a short here : kzbin.info/www/bejne/n4vIpYywnbqor5Ysi=LaKwwz69bWx5hfhj You can clearly see in my top speed test above 15mph I was not pedalling and my legs and body were still. Its just down to a few other youtubers who have reviewed this bike without following the full speed unlock procedure and just did the basic one by which it sounds you are referring to. The top speed of this bike using throttle only is 30mph.

Most of the noise is inside the gearbox itself, the oring noise is more of a clatter sound you get when rolling over bumpy ground. The grinding sound isnt heard on the mx3 only mx4

Yeah, its called the ‘ please don’t steal my bikes or arrest me for wheelie’ing on the road ‘ squad 🤣 haha no worries. Been doing it like this for a couple of years its just that people get stabbed for this type of bike in the uk near london let alone a surron/talaria so I’d rather keep my identity on the low 💪🏼 thanks for watching and commenting though brotha!

Under one week 👍🏻

Thanks mate ​@stingyrogerr

Fox ranger bro!

Sony a6700 with a sigma 18-50mm lense f2.8!

The bike has no usb port this is a talarua sting not surron, and the cigarette lighter is to turn the 5v power to 12v thats the transformer although i snipped it off recently and wired it direct to a connector

@@stingyrogerr thank you! I don’t have a bike yet. Waiting till the new year. So I don’t know what bikes have what. Theoretically could use plug this into a surron or something that has a usb port? Just curious. Because the Chigee play has a usb plug to power their unit

These are the top dog in terms of bespoke systems for ebikes. Unbelievable performance. the rotors alone are true floating (unlike most other brands) and 3mm thick nothing else like them on the market. If the prickly kit doesnt come with these rotors it wont be anywhere near as good in theory.

@@stingyrogerr do they sell the rotors separately? My budget was around 400-450$

@Danielxperez14 yes i believe the whole kit can be purchased in individual parts

Been working great for me the last 4 years but yeah man could do - maybe you got harder water. Mines softened from the mains as on the property we have a professional detailer 💪🏼 my bikes get abused and used and left muddy most the time anyway this video was one of my first!

I’m sure you can as long as its a registered model the GOV recognise to be a moped :)

Dm it to me on ig @stingyrogerr 👍🏻

@@emmahope23 thanks for the comment and thanks for watching emma👍🏻

Hey man! My email’s in the bio if you wanna make it happen!

Hey! They are 2 inches taller than the stock fast ace unweighted, it transfers to about 20mm taller once its laden with bike weight as more travel = a little bit more sag 👍🏻

@@stingyrogerr are they Coil or Air springs? If coil, what's your weight, and based on your review, i assume rate was ball park where you wanted it.

@miketdaniel coil and im 67kg and they were perfect. I did adjust rebound a touch out the box only 2 clicks but other than that spot on. Liked the way they felt so retuned my ext shock to match the feel👍🏻

As easy as just stretching it over 👍🏻

Yeah sometimes linkage bearings wear out! Check with the bike off the floor for play

Very similar performance with a bit less travel and much less weight. I also have sx85 forks but removed due to the balance upset and also the geometry became strange 👍🏻 definitely reccomend

@@stingyrogerr thanx for reply damm I'll keep that in mind so u saying the ktm makes her to heavy mins already 230lbs but okay thanx for extra information and keep on doing ur shit kid

Ah I’m not sure man! I never used a 21” front! I’m only short! 🤣👍🏻

​​​@@stingyrogerrbut your not on stock rims also.. is it like a mtbstyle hub? The same style i bought from smpro with a mtbstyle hub

@jacobcuijpers702 no it is a talaria style hub. You can see at www.wgtracing.store

@@stingyrogerr yes its the same style as mine. But i read 70 width max below? 🙄

It comes with the nucular p24f controller 👍🏻 thats its display

Yeah man after releasing the light bee controller they made the mx4 version and lastly the mx3 version although the discount code won’t work on those two

It rubs on supermoto 16” 💔

Similar but not the exact same! That was my exact thought when i took them out the box aha! But no there are some differences, these are thicker and chunkier overall. Thanks bro! 🔥❤️

Thank you Logan! 👍🏻

@@stingyrogerr maybe I missed it, but is the front brake mount set up for the Volar right out of the box? Or does it require an adapter?

@logan-taylor it comes with two mounts in the box! One for volar sport and one for regular mtb style brakes! I missed that part out of the video!

Yeah man it comes with two adapters, one for the volar sport brakes and another for regular mtb style brakes 👍🏻👍🏻

@@stingyrogerr good to know!

🤣

Yes this is true, but i prefer to route it this way because when i swap to supermotos 16” front wheel it can sometimes rub my tire! But yes you are correct should be inside really

Yeah man, riding on the road non-legal is instant seizure and a potential license loser.

The external outer/upper will be of a thicker metal but yeah the lower stanchions will be 37mm! I also have a 150r awesome machine but too loud and hot to get out most of the time 🤣 these uppers are about the same as my 150r uppers but much much lighter! As always thanks for watching

@@stingyrogerr Too Loud...does make it difficult to enjoy internal combustion motor dirt bikes.

On the front I always stick to 70/100-19 mx tire and rear 90/100-16 mx tire or a 110/90-16 rear for supermoto ! Those are pretty much maxes.

​@@stingyrogerr70 max? 😮

On supermoto i use 90/80-16 front. It depends on tire, the only thing limiting is fork guard but can be trimmed and gain 10mm more each side

They are 500g heavier than the stock forks!