Use a bit of petroleum gelly (vaso) to help stick the springs in place
@bobwebb185517 сағат бұрын
The rack and mask part , How long di leave thm on the rack before i put them in the oven?
@OutisNemo66620 сағат бұрын
Didn't work pal
@moodamoo55Күн бұрын
Thank you so much. I used my elbow instead of my fist and it came open easily. One happy daughter, now has her Christmas money back, without wrecking her safe.
@dinosaurizedanarmystore86292 күн бұрын
Brother great content. can I send you some product for reviews? if you like it you can make contents/
@joenugent39942 күн бұрын
I learned something. Thanks for sharing
@FreeSmokeEA3 күн бұрын
Can someone tell me if my trailer is leaning back would I still be able to attach it to the ball hitch. Just bought a new boat and the boat and trailer are leaning back kind of higher then where the hitch would be
@brianpeele3113 күн бұрын
Brilliant!! Thanks, worked a treat!
@nsmith763 күн бұрын
Thank you for this! Got a flat yesterday on my way home and to my surprise, no wheel lock key anywhere. Used Method 1 and got it right off. Why do they even bother with these things? Thank you!
@DownforceSolutions3 күн бұрын
Can you use the PID as a controllerto shut a propane heater on and off ? The light bulb would be the heater turning on and off?
@NolanBuda-fp3nz5 күн бұрын
Hey jose! Great videos been following all of them, and they have been very helpful! I've replaced my vro to a regular fuel pump all my lines ect. And Rebuilt my carbs. My main problem was at full throttle i was only getting about 14mph rather than the 30mph i have been in the last couple years.(last year, ran perfect) i'm really hoping the carb rebuild solved this problem. I have yet to throw em back on and test it on the water. just stumbled upon this video about the reeds. Do you think the reeds could have anything to do with my half speed at full throttle problem? Appreciate any feedback and thank you for your time!!
@NolanBuda-fp3nz5 күн бұрын
89' johnson tracker 40hp if your wondering.
@teter1295 күн бұрын
Just found this channel of Boston Whaler 13 awesomeness!
@MrEmadeldin855 күн бұрын
It worked , wow😊
@bagabus6 күн бұрын
Great video and very helpful. Its pretty similar to my yamaha 20hp 2 stroke and I was able to bring it back to life! My only sugguestion is if anyone doesnt want to wait or pay for 24 gauge copper wire, most ethernet and phone cables are made with 24 guage copper, so if you have some kicking around you can strip that and use it to clean out the jets.
@carlodangelo83486 күн бұрын
thanks Jose
@ronaldpatton59066 күн бұрын
Learn how to sharpen a drill on a bench grinder. Been doing it like that for 50 years.
@denbergeron7 күн бұрын
Very interesting video. Very easy to understand. Thank you
@Retroadventure8.07 күн бұрын
Thank so much looked everywhere for it 🎉
@alexandreesquenet37368 күн бұрын
The old fat USB is the mini USB ^^
@OGMoses_9 күн бұрын
I’ve got the first 2 types you tested for my 130hp Yammy I had no issues using either but I prefer the one’s you tested first because the water comes in both sides.
@kartobubufxc9 күн бұрын
its works thanks
@squeakychairproductions68139 күн бұрын
Dang, I wish you were my neighbor! Thanks for this series! It has been a huge help for my restoration.
@TheMrgoodtool9 күн бұрын
I sent a "contact us" email to cannon/stack-on safes, asking for the time interval for maintenance of the door mechanicals. They wanted a video, serial number, etc etc. Geeze people, just answer that simple question you know? Then I got smart and checked KZbin and found your video on my exact safe!! Thank you so much!
@user-hd5ke7rl1t9 күн бұрын
Tried and didn´t work
@pwmiller575911 күн бұрын
Don’t think I would like that at all..
@damienlosa275411 күн бұрын
Can I have the link for the clamp removal tool? Thank you
@bastiaanspaargaren932311 күн бұрын
Great video man!
@rilesupped187912 күн бұрын
My safe looks exactly like that one and……… Doesn’t Work! Time for locksmith as I have important paperwork that I don’t feel like damaging by using a cutting disc.
@rogerjarrell78312 күн бұрын
Can you put up another link to the polymer, the current link doesn't work
@djrichroman94913 күн бұрын
Great video, thank you!
@ExtremeDIYGuy13 күн бұрын
Glad you liked it!
@caesaraugustus828113 күн бұрын
Good video man. Hope you have saved me a bunch of hassle. Was about to cut my safe open from the back and then reweld it if I could fix it.
@ExtremeDIYGuy13 күн бұрын
Glad I could help
@RadioRich10015 күн бұрын
It looks like you stripped a phillips screw head moving the latch bracket so you could do that.
@jennymohr676815 күн бұрын
Can you use a doubled freezer Ziploc bag?
@ExtremeDIYGuy13 күн бұрын
I don't see why not, not as strong though.
@Auto-Minute16 күн бұрын
Awesome! They make good products. Installation looks clean and straight-forward :)
@ExtremeDIYGuy13 күн бұрын
Yes they do
@Unakayboating16 күн бұрын
I know this video is old but buddy you are a my go to from here on. That tiny spring took me by surprise. This video was perfect right to blowing into the line to see if it was done right. Thank you
@ExtremeDIYGuy13 күн бұрын
Thanks 👍
@andrewbizzarro608517 күн бұрын
Great video, its very helpful. Thank you for showing us and talking us through it.
@ExtremeDIYGuy13 күн бұрын
Glad it was helpful!
@breezykid718 күн бұрын
Do you know the specs on the timing marks on an OEM Yamaha Mitsubishi cdi box?
@ExtremeDIYGuy13 күн бұрын
I do not sorry.
@tdblanchardvito18 күн бұрын
Great video! Looks like I have my work cut out for me 😮
@ExtremeDIYGuy13 күн бұрын
Yeah, the rub rail is a bit of a pain lol
@muhammadarsalan799618 күн бұрын
does any company supply an automated solution for it
@ExtremeDIYGuy13 күн бұрын
I"m sure someone does but am not aware of any of the top of my head.
@muhammadarsalan799613 күн бұрын
@@ExtremeDIYGuy any idea what should i search for it ?
@user-ws7us5me4s18 күн бұрын
Great video but the tool is not practical, will never spend any coin for this kind of technique 🤮
@Debidawg18 күн бұрын
Anyone happen to know the heighth adjustment for shiftrod linkage????
@ExtremeDIYGuy13 күн бұрын
It should be in the service manual if the height has to be set to a certain distance
@craigtaylor976419 күн бұрын
Thanks for the info. Gonna give it a shot
@ExtremeDIYGuy13 күн бұрын
Let us know how it goes!
@potsy997319 күн бұрын
My 30 year old snapon gravity feeder still works great.
@ExtremeDIYGuy13 күн бұрын
I'm sure it does, great tools
@paulinogancena125620 күн бұрын
This is the best instruction in you tube. Thanks for your video and create more content👍👍👏🙏.
@ExtremeDIYGuy13 күн бұрын
Thank you, I will
@TheRetromat20 күн бұрын
Unfortunately this ‘sundial’ is more useful as a paperweight. While it looks good, it’s a mish-mash of the traditional horizontal dial with angled gnomon (good for one latitude) and the universal dial with a thin central perpendicular pillar gnomon (good for all latitudes). I have a variation of the second type, received as a gift and presumably from a similar manufacturer, but the pillar is off to one side and this dial also is therefore useless. Might make a good diy project to turn one of these into a proper dial, otherwise don’t waste your money.
@ExtremeDIYGuy13 күн бұрын
This one is more of a decoration than a sundial, but it does work to a certain degree
@_zola221 күн бұрын
please, I need help with the dometic safe, it also has a bad battery and throws error 2, but there is no key or lock option, only when the battery is weak and it cannot be opened...
@ExtremeDIYGuy13 күн бұрын
I really cant help you remotely, sorry
@jefflitzko473721 күн бұрын
how do you change the bulb on the bow light, 2005 Montauk there is no access from the bottom and no visible way to remove light only two small screws on the sides where the lens is that doesn't do a thing when removed
@ExtremeDIYGuy13 күн бұрын
the two screws should let you remove the top. Perhaps it's corroded together?
@tonynagtegaal596622 күн бұрын
Are the adjustments also the same for 60 hp autolube?
@ExtremeDIYGuy13 күн бұрын
They should be similar but I would refer to the service manual for actual measurements
@tonynagtegaal59667 күн бұрын
Where can i find a service Manual? I dont have won. Thanks for responding! @@ExtremeDIYGuy