nRSP-ST previewed at UK Hamfest
2:20
SDRplay Welcome video
5:42
7 ай бұрын
Introducing the SDRplay RSPdxR2
5:59
20m Japan and Hungary on 20m
1:22
2 жыл бұрын
Пікірлер
@KarlWitsman
@KarlWitsman 3 сағат бұрын
Watching again, just because I'm missing hearing Steve on videos.
@Dixy3
@Dixy3 23 сағат бұрын
Sadly, disappointed by UK stockists and distributors who sold out well before Christmas and New Year periods 😢. Ill prepared for sales. Restocking will not happen before February 2025. This will give European Union sales to dissimate the UK market taking the bulk of sales leaving only crumbs for British sales. Personally, I am looking for a networked system but with two TX and two RX channels for full Duplex to communicate with QO100 ES'HAIL Geostationary Satellite.
@stellusctf6479
@stellusctf6479 3 күн бұрын
SDRConnect Does NOT automatically detects the SDRPlay RSPDX - SDRConnect asks for "IQ File", the tool is NOT intuitive & the product manual seems to be written by 5th grade student!
@SDRplayRSP
@SDRplayRSP 3 күн бұрын
@@stellusctf6479 then you have a bad USB connection. As for the manual I’m curious what you’re referring to?
@stellusctf6479
@stellusctf6479 2 күн бұрын
@ yes I reported the same to the SDRPlay tech support & they asked me to reinstall software & retry ,no luck, the USB connector is an very very OLD design (USB 1.0 in 1996) & I am amazed in 2024 they are selling , if I ask for replacement, they will send me some used/repaired stuff I am totally disappointed, for me it is like a ‘dead brick’
@SDRplayRSP
@SDRplayRSP 2 күн бұрын
@ if you mean the USB-B coonector on the RSP it is much more mechanically robust than the more common micro-USB. Most likely you have a bad cable or USB port in your PC.
@stellusctf6479
@stellusctf6479 2 күн бұрын
@ Thankyou , it is not the issue of USB on the laptop , same port works for my $20 SDR-RTL ,so that is ruled out, this old type USB cable hard to find even if I want to replace I made mistake (before buying I should have checked what kind of interferences it provides)
@SDRplayRSP
@SDRplayRSP 2 күн бұрын
@ it’s available in any office store, standard stuff for printers and scanners.
@DIYAirwaves
@DIYAirwaves 3 күн бұрын
sounds like a good SDR, there's not really alot of options for shortwave
@KIMYYCIRCLE
@KIMYYCIRCLE 4 күн бұрын
SDRconnect --server SDRconnect Network Server (b6fce59a3) No streamable source found
@mikefischer8706
@mikefischer8706 6 күн бұрын
>>>-----> Take the time and watch this VIDEO... The Comment that the presenter makes at 9:04 in the video (RSYN1 in the RX CONTROL panel) RSYNC must be Enabled, is STILL a Very Relevant point! I was thinking my problem was wtih OmniRig's configuration, but it was not. This one item fixed my problem. I was looking for Hours to fix a problem where SDRuno and my Rig were not talking to each other for frequency changes, etc. Thank you!!
@tony2wheelz408
@tony2wheelz408 6 күн бұрын
This shit doesn't work for me. I get nothing. Does a Mac even need this anymore? Its hilarious when an engineer says its so easy when most of us rip our hair out, give up and move onto something else while the engineers feel so superior.
@KE8ODY-WV-Ares-Ham-Dad-3O4
@KE8ODY-WV-Ares-Ham-Dad-3O4 7 күн бұрын
Any deals going on for the holidays I need one that works hf very well
@SDRplayRSP
@SDRplayRSP 7 күн бұрын
@@KE8ODY-WV-Ares-Ham-Dad-3O4 hamradio.com
@KE8ODY-WV-Ares-Ham-Dad-3O4
@KE8ODY-WV-Ares-Ham-Dad-3O4 8 күн бұрын
So if I got the RSB1a I wouldn’t need to buy anything else but an antenna
@SDRplayRSP
@SDRplayRSP 8 күн бұрын
@@KE8ODY-WV-Ares-Ham-Dad-3O4 you will also need a USB cable if you don’t already have one (USB-A to USB-B, a common printer/scanner cable)
@KE8ODY-WV-Ares-Ham-Dad-3O4
@KE8ODY-WV-Ares-Ham-Dad-3O4 8 күн бұрын
@ yeah? Now theyre not plug snf play say like a airspy unit are they
@SDRplayRSP
@SDRplayRSP 8 күн бұрын
@@KE8ODY-WV-Ares-Ham-Dad-3O4 the Airspy units also require a USB cable. Some include the cable with the unit, we chose not to charge you more for a cable you already may have.
@KE8ODY-WV-Ares-Ham-Dad-3O4
@KE8ODY-WV-Ares-Ham-Dad-3O4 8 күн бұрын
@ usb a to usb b how hard is installion of drivers etc
@SDRplayRSP
@SDRplayRSP 8 күн бұрын
@@KE8ODY-WV-Ares-Ham-Dad-3O4 very easy, there are videos on our website
@KE8ODY-WV-Ares-Ham-Dad-3O4
@KE8ODY-WV-Ares-Ham-Dad-3O4 9 күн бұрын
So my enfhw will go into this?
@SDRplayRSP
@SDRplayRSP 8 күн бұрын
@@KE8ODY-WV-Ares-Ham-Dad-3O4 yes, maybe with a balun.
@eduardocerioni5331
@eduardocerioni5331 10 күн бұрын
Thank you very much!
@mlentsch
@mlentsch 12 күн бұрын
All this talk of SNR and your audio is blown by 1990 standards.
@mlentsch
@mlentsch 13 күн бұрын
Whoa!! Get a friggin' DBX. You need compression, de-essing, limiting etc. WTF!!??
@mlentsch
@mlentsch 16 күн бұрын
What the heck is that satanic wallpaper?
@medicineman4040
@medicineman4040 19 күн бұрын
Fantastic vid for those of us trying to figure the actual hands on 'plug this into this' for all the cables. One problem, I cannot find the MFJ 1708B-SDR anywhere or a close alternative. Any suggestions. Using a Yeasu 710.
@SDRplayRSP
@SDRplayRSP 19 күн бұрын
Unfortunately MFJ have stopped trading. We are in contact with VE2DX who is developing an alternative T/R switch. ve2dx.com/sdr1
@medicineman4040
@medicineman4040 19 күн бұрын
@@SDRplayRSP Thanks so much for the reply. There is hope! I visited the VE2DX website. They seem Icom'centric....no mention of Yeasu there at all :(
@PureAwareness76
@PureAwareness76 21 күн бұрын
🎉 Lovely, thank you. The popular Youloop, GA-450, 800, and MLA-30+ is everywhere, but what about the cheap LZ1AQ copy? Some says its amplifier is better than the MLA-30+'s PLUS, the LZ1AQ copy has wider coverage, up to 500 Mhz. I have an LZ1AQ copy from a Chinese site, and it's really good. A comparision with the MLA-30+ would be interesting 😊
@backyardcnc
@backyardcnc 21 күн бұрын
Does SDRConnect serve up a browser based page to the remote access device or does the remote also need connect installed? I’d like to remote access from an iPad?
@SDRplayRSP
@SDRplayRSP 21 күн бұрын
@@backyardcnc for most RSPs a remote SDRconnect server is required. The new nRSP-ST includes a web server so an iOS or Android device can be used as well.
@DV-ml4fm
@DV-ml4fm 22 күн бұрын
I believe this hobby of shortwave is for seniors. I see many seniors doing theee tutorials.
@SDRplayRSP
@SDRplayRSP 22 күн бұрын
@@DV-ml4fm but we’re still young at heart! 😁
@DV-ml4fm
@DV-ml4fm 22 күн бұрын
@SDRplayRSP Yeah, I got interested in radio recently because of SDR. 🙂
@michaelstora70
@michaelstora70 27 күн бұрын
Can the software control a transmitter's VDO to keep it synced with the SDR? Will it recognize a USB rotary dial?
@zandanshah
@zandanshah 29 күн бұрын
One of the best Digital Radio in the world, without breaking your piggy bank. Keep the good work going.
@achthuuzen
@achthuuzen Ай бұрын
Hello, I have installed it but want to remove it in Ubuntu, how do I do that? I can't find it anywhere to remove it
@SDRplayRSP
@SDRplayRSP Ай бұрын
if you installed in the default location it will be in /opt/sdrconnect
@achthuuzen
@achthuuzen 27 күн бұрын
@@SDRplayRSP Thank you
@achthuuzen
@achthuuzen Ай бұрын
Hello, I have installed the wrong version on Ubuntu. How can I remove it from Ubuntu
@SDRplayRSP
@SDRplayRSP Ай бұрын
Not sure how you can install the wrong version, one is for ARM64 and the other for x64. Just rerun the installer for the correct version.
@achthuuzen
@achthuuzen 29 күн бұрын
@@SDRplayRSP You are right, but it does not work on RTL SDR v4. That's why I want to delete it that's the problem
@achthuuzen
@achthuuzen 23 күн бұрын
@@SDRplayRSP Where is the installation folder placed so I can delete it?
@AdminatArmyNavyStores
@AdminatArmyNavyStores Ай бұрын
Wow, love the timed recording feature. I can think of a few things I would use that for.
@Threlly
@Threlly Ай бұрын
It's a nice all-in-one solution. However. An RSPduo would give me full dual-receive and diversity and with a tiny Raspberry PI the same online functionality at a GREATLY reduced cost. I do love my RSPDuo, but the cost/feature ratio of this device in comparison suffers badly. Please address this.
@SDRplayRSP
@SDRplayRSP Ай бұрын
you are mistaken, an RSP with a Pi falls well short of the online functionality of the nRSP.
@Threlly
@Threlly Ай бұрын
@@SDRplayRSP But not dual-receive and diversity. There are dedicated linux builds for the Pi that will DEFINITELY cover all the remote functions.
@SDRplayRSP
@SDRplayRSP Ай бұрын
@@Threlly you already have an RSPduo (thank you). If you think you can roll your own with a Raspberry Pi and save a bunch of cash, go for it.
@Threlly
@Threlly 26 күн бұрын
@@SDRplayRSP Way ahead of you! and saved a few hundred pounds
@Stoptherideiwanttogetoff
@Stoptherideiwanttogetoff Ай бұрын
Can the receiver be used for the directional finding?
@fotografm
@fotografm Ай бұрын
Am having a problem passing through the rspdx via a usb port on Proxmox. So far no success. Other SDR's are fine. On a standalone machine everything works great as expected. Thanks for this great software ! Now I want to run it on an Ubuntu virtual machine 🙂
@SDRplayRSP
@SDRplayRSP Ай бұрын
beyond this I have no idea: pve.proxmox.com/wiki/USB_Devices_in_Virtual_Machines
@bazfitz6607
@bazfitz6607 Ай бұрын
Just upgraded from the RSP1A to the RSP1B and if I'm honest side by side sharing the same loop antenna there really isn't any difference, not that i can tell.
@СергейНиколаевич-н2е
@СергейНиколаевич-н2е Ай бұрын
Tell me if you can how to fix it and get it running.
@СергейНиколаевич-н2е
@СергейНиколаевич-н2е Ай бұрын
SDRuno has lost connection with the API service. The API service will be restarted and SDRuno will close. Please restart SDRuno.
@СергейНиколаевич-н2е
@СергейНиколаевич-н2е Ай бұрын
please tell me RSP1B stopped turning on, it shows this message. it doesn't turn on from other programs either.
@ManuelPinner
@ManuelPinner Ай бұрын
now you guys need to make plugins to pick up p25, Yaesu fusion, DMR digital voice modes which is probably used in the United States,
@mariuszjanczarek5626
@mariuszjanczarek5626 Ай бұрын
... I've done everything and it's not working ... I have an info ---Unable to communicate with the SDRplay Service. Restart the servive and start SDRuno again. SDRuno will now exit--- can somebody help me ?? ...
@SDRplayRSP
@SDRplayRSP Ай бұрын
@@mariuszjanczarek5626 open a support ticket
@antronargaiv3283
@antronargaiv3283 Ай бұрын
Just getting started playing with SDRConnect. Seems to be working fine on my Mint 21.3 system, and I'm very grateful that you decided to support Linux. I'm looking forward to being able to add demodulation modules for digital radio modes, fax, and data. An I/Q display would be nice as well (or maybe there is one but I haven't discovered it yet).
@aerofart
@aerofart Ай бұрын
When will scanning be implemented?
@aerofart
@aerofart Ай бұрын
I am a huge fan of the SDR Uno software. It had (has) so many great features, deign and functionality I was using it as a panadapter with my HF rig. I am trying to migrate my ham radio PC to MacOS and have even bought and plan to use the RF by tapping into my Yaesu, but as long as there is no rig control with SDRConnect, my RSPdx is useless to me. Please expedite the software upgrades. This development cycle is taking what seems like FOREVER. THANKS.
@jimlanigan.wa3erq341
@jimlanigan.wa3erq341 Ай бұрын
Excellent video
@hyperionsixzeroeight5064
@hyperionsixzeroeight5064 Ай бұрын
Keypad frequency select does not work, uninstalled it.
@SDRplayRSP
@SDRplayRSP Ай бұрын
@@hyperionsixzeroeight5064 works just fine.
@redacted2763
@redacted2763 Ай бұрын
Wow! That was easy! And loving SDRconnect so far. The only thing that is missing for me is rig control. I previously used SDRuno as a panadapter for my FTDX-1200. I'll wait for rig control in SDRconnect verses going back to Windows. Thanks for supporting Linux!
@michaelstora70
@michaelstora70 Ай бұрын
Can the software do diversity reception with two separate devices or does it require the Duo?
@SDRplayRSP
@SDRplayRSP Ай бұрын
@@michaelstora70 the Duo is required.
@gibsonmb1
@gibsonmb1 Ай бұрын
When updating an existing installation, this process did not work for me. Near the end I get a long error message in red. Turns out this was because of course I already had the sdrconnect service running from the previous installation. Therefore, to note; the sdrconnect service must be stopped before following this install process. I used sudo systemctl disable sdrconnect.service to disable the service and also disconnected the RSP2pro. I then rebooted to get the installation process to run successfully e2e. Afterwards I ran systemctl enable sdrconnect.service to enable it again (and finally remembered to plug the sdr back in !!!!). I'm not sure I needed the latter command.
@SDRplayRSP
@SDRplayRSP Ай бұрын
@@gibsonmb1 the installer will stop the service.
@gibsonmb1
@gibsonmb1 Ай бұрын
@SDRplayRSP Not in my case. The installation worked fine after I stopped it manually. I tried three times without stopping the service manually and it failed right at the end with a red error message. Then sdrconnect would not run.
@ManuelPinner
@ManuelPinner Ай бұрын
I have SDR connect on my raspberry pi and on my windows 11 laptop,
@fatelon5656
@fatelon5656 Ай бұрын
Contour Shuttle support please
@sidkradd
@sidkradd Ай бұрын
Bonjour, j'aimerai réaliser l'antenne cadre 40, 80 et 160m 7F5HD mais il me faudrait un condensateur variable de 500 pf pas très encombrant, si vous en avez un à me vendre de suis preneur, merci de votre attention
@DimitrijTjunikov
@DimitrijTjunikov Ай бұрын
I am adding to my previous comment. The corrected version (preview 105b8f722) is stable and fully functional, unlike the previous version (preview 5 - 8d71cadca). Thanks to the authors for the quick fix. OS Debian 12 as client and Raspberry PI as server.
@Optimus2179
@Optimus2179 Ай бұрын
How do i put the LO option on the pan adapter?
@dxhunter01
@dxhunter01 Ай бұрын
I tried the NR, but with weak (dx) signals there is nothing to hear. I was on 10 meter and signals were weak. Did I miss something? Is there a threshold slider? Installing in Linux (fedora) wash straight forward. Only no RX icon, only the word SDRconnect. For the rest it works good on my Linux machine. Used RX is the RSPdx.
@ТоварищЪ-7
@ТоварищЪ-7 Ай бұрын
Interesting information
@TalmidAndy
@TalmidAndy 2 ай бұрын
The first few times I looked at the releases of this app I enjoyed it and it worked with my RSP1. Every time I have used it since then, whether Linux or Windows, it can't even see is the RSP1. I had hoped to use the server with a few RSPs to as a STEM teaching and demonstration tool to get kids enthused about radio and hopefully encouraging to get the ham license. Unfortunately as it stands I'm going to have to find a different path.
@SDRplayRSP
@SDRplayRSP 2 ай бұрын
@@TalmidAndy SDRconnect has never worked with the RSP1, which lacks the necessary hardware. It does work with the RSP1A (and all the other RSPs).
@TalmidAndy
@TalmidAndy 2 ай бұрын
@SDRplayRSP maybe mine is an RSP1A then. It is not in the original plastic case. I will see if I can obtain some more up-to-date equipment.
@gerfmon1
@gerfmon1 2 ай бұрын
SDR Connect is slowing getting better, more and more features all the time. But it's a shame my SDRPlay device is broken and SDRPlay won't let me fix it. All the component numbers ground off the top. Oh well, guess they don't want future business from me, plenty of other SDR devices out there..
@SDRplayRSP
@SDRplayRSP 2 ай бұрын
Are you sure it was a genuine SDRplay device? SDRplay does not grind the symbolisation off any of the components on our circuit boards.
@gerfmon1
@gerfmon1 Ай бұрын
@@SDRplayRSP Yes, I bought it from Ham Radio Outlet several years ago, pretty sure it's from SDR Play. The problem is the small chip that switches the 3 antennas (SDRdx) no longer works. All three antennas connections are shorted together, I can't switch between antennas. I hate having to pay a large repair bill when I'm an electronics technician with good soldering skills and there's a good chance I could fix the problem with a $2 part. I am a ham afterall and love working on my own electronics. Thanks.
@imvuimvu4897
@imvuimvu4897 2 ай бұрын
I have a question, with a software like Teamviewer, we can all remotely control an SDRPLAY or other type of SDR! OK, it may not be as fluid but the work is there.
@matspersson4091
@matspersson4091 2 ай бұрын
Crashes on windows 10 x64 pro. Reinstalled version 4 and it works fine.