Пікірлер
@jodycwilliams 18 сағат бұрын
100Mbit connection isn't saturated, but it is garbage for latency. Latency is actually very important for this specific camera, but Unifi didn't care. Saving $5 per camera by not going Gbit was terrible. There is no fixing the autotracking or PTZ stuttering issues with software updates.
@Djivfv 21 сағат бұрын
Hi I bought a standard license and would like to add 2 basic licenses. But I only have standard license as an option when I want to add a new user. What can I do?
@Nimitz_oceo Күн бұрын
I’m not sure if you mentioned or if i missed it, you didn’t talk about inter-VLAN routing, is it enabled by default or do you have to enable it manually.
@BryonD Күн бұрын
Works only if you are the Admin.
@jasonmc7031 2 күн бұрын
Would you be able to share the network devices and IP schemas?
@andressebatianVarela 3 күн бұрын
Hello, what do you recommend to improve the connection in a house? The Cloud Max, the Ultra, the Express? For home automation, cameras from other brands, online games? Etc. Thank you very much.
@ronald0122 4 күн бұрын
we only need a budget 2.5gb switch
@razvanel 4 күн бұрын
What temperatures do you get with device?
@DarenVampire 4 күн бұрын
Hey, there is a question that I have been searching but have no answer to. I have a small home (100sqm), connected endpoints are: 1 laptop 1 PS5 1 TV 1 U7 Pro AP (Do I need an injector or anything) 3 G5 Turret Ultras My internet is giving me 3 gbps but I want to future proof in 5 years. There are 2 ways I can consider 1. ISP > UCG Max > 8 PoE switch > 3 G5 Turret Ultras + 1 U7 Pro Max AP 2. ISP > UDM Pro Special Edition > 3 G5 Turret Ultras + 1 U7 Pro Max AP I am not sure if this setup is deployable. Any help is appreciated!
@serogas5 4 күн бұрын
Will 512gb be anough to run only ring door notifications with video recordings ?
@serogas5 4 күн бұрын
Thank you! You helped me to decide between udm pro and gateway max. I clearly now know that i need gateway max with my u7 pro, u7 pro max and for future want to add cameras and ring door. Ring door should be capable, right ?
@ApexOneTech 4 күн бұрын
Yes! But depending on how many cameras you want (including doorbell) and if you want 24/7 recording, you might need a larger drive.
@serogas5 4 күн бұрын
Awesome, thank you! 😊@ApexOneTech
@kpax307 4 күн бұрын
Thanks for your review. I am considering replacing my Ubiquiti POE switch with this one. Can you please measure the power consumption in idle and with some load?
@philtoy9241 4 күн бұрын
Can NAT be disabled?
@jeffockslang3638 6 күн бұрын
Thank you good Sir ! very detailed and straight forward.
@VernieSorel-v1l 6 күн бұрын
Corkery Mountain
@johnersj7099 6 күн бұрын
Great video. I have 10Gb FTTH. 7Gb in real world. 8 Annke PoE cameras into an Annke NVR. 4 floors. It is a house/home installation. I would like wifi on each floor. About 80sqm per floor. How would you deploy? Would you use the DM SE? Or the MAX? I do not want cloud subscriptions. I just want to be self contained, but I would like the NVR to be stored in a secure room away from the network core.
@Coodex1337 8 күн бұрын
By far, the most comprehensive and easiest (All-in-one) setup guide I ever seen. Good job, liked and subbed! 👏
@ArnoSchmidt70 8 күн бұрын
The construction with the cable attached to the camera is totally different to all other Unifi cameras. That's a problem if you want to replace one Unifi camera with anothe one.
@ApexOneTech 8 күн бұрын
True. But, for a new install, this is one of the fastest and easiest to get the angle right.
@hpsfresh 8 күн бұрын
Cake is a lie
@Chris-p8k 9 күн бұрын
Nice video. Can you say what the UCG Max temperature and CPU utilisation looks like? My UCG Ultra typically sits at 38 centigrade and I suppose averages 40% CPU, with a 140mbps connection, about twice as many devices, VPN server and no Protect. It varies between 10% to 80%, so I have a feeling the Max, with the exact same CPU as the Ultra, may struggle when I get 1gbps connection and possibly Protect.
@ApexOneTech 8 күн бұрын
Thanks! Yes, runs hot. Also about 40% CPU, 80 degree Celsius :) it’s in a closet but otherwise it’s air conditioned. Honestly, that seems very hot to me. Not sure why. I know it’s meant to be on a desk and that might help. I am running protect and adding additional cameras weekly to stress test it. However, I will say my internet speeds on 1 gig are fine.
@mrpulf88 9 күн бұрын
I have a Linksys router and looking to put a U7 outdoor externally to get wifi in the garden, will that connect straight to my router or do I need a gateway of some sorts?
@ApexOneTech 8 күн бұрын
You don’t have to get a gateway. This video is for you: Add UniFi Access Point to Existing Network | Step-by-Step kzbin.info/www/bejne/p2fPaJJjorymmMU
@JacobDrJIsrael 9 күн бұрын
I have 2 gig internet... What could I expect in terms of performance with intrusion protection enabled?
@airborneinferno 8 күн бұрын
I believe the UCG Max can only deal with 1.5Gbps throughput so you're not going to get more than that. You'd have to go up to a UDM of some variant to get a minimum of 3.5Gbps routing capacity to get full 2 gig speed.
@ApexOneTech 8 күн бұрын
As others have said, 1.5 G with full detection turned on. You could limit the threat types and see if you get higher throughput. But really, you need to go UDM.
@hpsfresh 10 күн бұрын
Unifi have their own cable modems, don’t you like them?
@ApexOneTech 8 күн бұрын
They do. But the customer had a decent modem.
@hpsfresh 10 күн бұрын
You know, you should always screw bottom first, because top will be in place because of gravity :)
@ApexOneTech 8 күн бұрын
Not a bad idea
@user-xo1tk9rn1t 10 күн бұрын
This channel very good for education too 👍🏼
@ApexOneTech 8 күн бұрын
Thanks for your feedback
@mandalaprayoga 10 күн бұрын
this is really game changing 1 device but many function
@ApexOneTech 8 күн бұрын
At 2.5 G, yeah it’s great!
@freestylesystemsTV 10 күн бұрын
Why, why, why doesn't it include PoE??? It's just stupid not to have it... Ugh
@Sh4veD4ve 8 күн бұрын
Adding PSE would increase internal heat a LOT - it would likely self-destruct. The power transformers in particular for PSE are the primary problem - they usually need some sort of heat dissipation on them.
@ApexOneTech 8 күн бұрын
Yeah this max already runs really hot. At least with the current software .
@ArnoSchmidt70 11 күн бұрын
The tracking function is promising but could be done better. I hope there will be improvements in further software versions.
@ApexOneTech 8 күн бұрын
I do hope the tracking is a bit more predictive and moves ahead of the person being tracked to really keep them on center of the frame.
@HRCFan Күн бұрын
The ability to patrol and then track when it finds a person would be amazing to have.
@pgee8702 11 күн бұрын
Protect now has a NAS storage option now...is the SSD required for this to work with the NAS
@scoopzuk 12 күн бұрын
Ooh tell me more about the USB switcher. We have a USB licence key that is forever getting swapped from workstation to workstation. We only ever need one user at a time so we're within licence terms but its unnecessary wear and tear on the USB key and ports. Never knew you could get USB to ethernet adapters, I guess there's the same setup on the workstation ends so each workstation has 2xethernet, 1x for connection to LAN and the other for USB extender? The key can only push to one workstation at a time and not 1 to many I guess.
@ApexOneTech 8 күн бұрын
Correct. Workstation needs to have two Ethernet ports. This place mostly had it because people work hybrid. So when they need the key, they press a button in the SwitchBot app to switch the key to their workstation. The usb switch has an IR remote. Then you add a SwitchBot hub that has an IR emitter next to it. You add that usb selector remote to SwitchBot and there you go. Let me know if you actually need this and I’ll get you links to the exact products.
@danightryder 12 күн бұрын
If only it had POE. Missed opportunity in my opinion
@ApexOneTech 8 күн бұрын
Would probably be difficult to package and manage heat
@drivewayjunkie 12 күн бұрын
Anyone notice theirs getting hot?
@ApexOneTech 8 күн бұрын
What’s the internal temp you’re seeing?
@danightryder 12 күн бұрын
if only it had POE at least 1 port would be amazing.... missed opportunity
@riad_ahmed 12 күн бұрын
can i buy the no storage option and install my own nvme without buying anymore addons?
@ApexOneTech 8 күн бұрын
No. You’ll need to get UniFi’s $19 tray
@KrispKiwi 13 күн бұрын
i was gonna get this but then the heat was a nope
@gadget069 13 күн бұрын
Question. What if your current router is at 192.168.1.1? Can I make the Cloud Gateway 192.168.1.2 during setup to avoid conflicts? Thje router will be put into AP mode
@ApexOneTech 8 күн бұрын
Your cloud gateway show be your DHCP server, that assigns the IP addresses it the devices connecting to the network. So I would set your new gateway to 192.168.1.1 or even something else like 192.168.10.1
@sunrunnernge560 14 күн бұрын
Subscribed ! Just a fast question. Can I physically run a cat 6 cable from my Router into the WAP, without the need for further hardware ?
@ApexOneTech 8 күн бұрын
Thanks for the sub! If your router has built-in PoE, you can. Otherwise, you need a PoE injector or a PoE switch in between.
@sunrunnernge560 8 күн бұрын
@@ApexOneTech very appreciated!!
@JaphethStauffer 14 күн бұрын
So my current setup is a Zyxel USG110 router going to a 24 port POE switch, and from that comes out my Unifi Gen 1 Cloud key and 2 access points. Am I understanding that this UCG MAX would replace my Zyxel, and Cloud Key? If so, can I transfer my customizations I made to my Zyxel to this as I have a static IP and need to access things within my network from outside?
@ApexOneTech 8 күн бұрын
Yes, it’ll replace your cloud key and your router. Just setup your cloud gateway max with the same settings or whatever settings you need. Since you’ll be replacing both your router and cloud key, I would set up the UCG Max from scratch. You can backup some UniFi application config files though if you’ll like and restore to the UCG Max.
@JaphethStauffer 8 күн бұрын
@@ApexOneTech thank you!
@frankitoo123 14 күн бұрын
hello first of all thanks for the great explanation, now, I succesfully installed 2 AP U6+, created the wifi network with windows controller, connected both AP from my PoE switch (connected to my zte isp router), everything works fine until multiple clients connects to the network, all clients can connect, but the internet is limited to a few ones, some ideas? thanks! (DHCP is enabled in isp router)
@hunterwilliams5482 16 күн бұрын
Can this be used outside on the side of a building with no roof overhang? It would be directly rained on.
@1979SFC 16 күн бұрын
Im looking for a setup for home security. Im thinking 7 cameraes. 1 dorbell and 2 wifi routers.. my plan is using a CG max 1TB and a lite 16 pos switch. then there is ekstra ports for internet in rooms aswell. does it sound like a viable solution??
@ApexOneTech 8 күн бұрын
If you only need Unifi for camera security, and not networking, you can consider the CloudKey+ or UNVR instead. The NVR is room for full size hard drives and can work with your existing, non-UniFi network. However, if you want ongoing full UniFi, this cloud gateway max would great. Just realize that if you turn on 24/7 recording on all the cameras you listed, the 1TB won’t give you much playback history. I haven’t put 7 cameras on the UCG Max yet so I can’t tell you how many days of footage you’ll get. But, if you’re okay with only recoding smart detections, then this would be a perfect solution.
@ApexOneTech 8 күн бұрын
I should also mention, make sure you PoE switch will have enough PoE budget to support all your cameras and APs.
@1979SFC 8 күн бұрын
@@ApexOneTech I also have 2 wifi ap and thinking of the doorbell
@nonsonoinmatrix 16 күн бұрын
Hey, thanks for the great video! For a wifi only usage would it be fine not to use the USW Ultra and connect the U6+ directly to the UCG Max?
@ApexOneTech 16 күн бұрын
The U6+ plus needs power that the UCG Max itself cannot provide. You need either a PoE switch added between the UCG Max and U6+ or a PoE Injector/adapter: UniFi PoE on Amazon amzn.to/48S0FtW
@22illingworth 17 күн бұрын
Great Video... I never considered 10.1.*.* for the networks. Way easier to manage. Can you change them all after inittially setting them up and if so do you re configure all together in one go or do them one by one ?
@ApexOneTech 16 күн бұрын
Change your gateway IP address scheme. Your devices attached to the network will automatically get the new 10.1** range within 24 hours or you can also power cycle devices.
@22illingworth 16 күн бұрын
@@ApexOneTech I meant to say all my VLANS :)
@GlennPerdicaro 17 күн бұрын
Cool video, Thnx!
@L0rdLogan 17 күн бұрын
I upgraded to the UCG Max as I wanted the 2.5gb ports.... You can't LAG on Unifi gateways, so a UDMP was out of the question
@ApexOneTech 16 күн бұрын
Yeah, I should've mentioned that. No UniFi gateways have port aggregation but nearly all the switches do except for USW-Flex, USW-Flex-Mini and USW-Ultra.
@joseangelmendez8496 18 күн бұрын
Hello: I have set up an Access point u6+ from the mobile phone and everything is ok. I have configured it "stand alone", and I access perfectly from the Unifi app, but it has assigned the ip to the device 192.168.1.135 and I want to change it but from the app it does not measure the option and if I try to access from a browser to the address 192.168.1.135 it does not leave me although it does respond to a ping. How can I log in and change your IP address from a browser or from the unifi app on your mobile?
@monochrome5297 18 күн бұрын
i'm interested in unifi for a while, but never they had such a small tiny gateway, they only hat gateway but needed a separated cloud key, i would get the non storage version of unify gateway max, the 2.5g is appreciated, the way i would use it for now since i get a free upgrade to fiver witch is 2/2g instead 1000/100mbit i got like 3 computers, 1 is a 24/7 radio online 2 is a gaming pc 1 is unraid nas with some dockers then i also have a qnap ts-763 nas wit ha 2.5g nic in it i have a hue smart hub , 2 home pod mini (basically as hub for eve smart plugs) several mobile phones, 2 ps5 steam deck 3 nintendo switches some speakers the access point will be probably living room witch is annoying from there to the following devices in the living room all connected on 1 cable with a switch to 3 on 1 spot with Flex 10 GbE 1 24/7 radio online pc 1 gaming pc 1 ps5 1 tv box from provider 2 kef lsx my bedroom (feeding 1 cable and then another Flex 10 GbE and a usw-ultra) 1 unraid nas wiith dockers 24/7 online 1 gaming pc 1 ps5 2 sonos era 100 1 sonos sub and then a wifi not sure witch yet all of these devices are currently wired connected because the build in wifi of my modem is so bad that my sonos can not stay sync my sonos is connected in stereo pair , sonos roam 1 bt receiver, and that drops the audio over eth to the other sonos i don't know if it can be in a much easier setup , but this is what i came up with
@KatesGardenGate 18 күн бұрын
Did anyone else ever get a "sorry we cannot complete your call at this time please try again later" after going through these steps?
@ApexOneTech 8 күн бұрын
It basically means you’ve configured something wrong. Most likely a licensing issue or did not turn on billing properly. Also check that you enabled enterprise voice for the user.
@ApexOneTech 18 күн бұрын
⭐️ UCG-Max-NS store.ui.com/us/en/category/cloud-gateways-compact/collections/cloud-gateway-max/products/ucg-max-ns?variant=ucg-max-ns?a_aid=Apex I may earn commission from my links, but the price is the same for you!
@nizmister 18 күн бұрын
What brand NVMe does the Max come with?
@CorruptionInc1 18 күн бұрын
From the reviews I've seen they're Kingston. The particular model number wasn't provided.