The Bike Sauce

Пікірлер

@tpk182 Күн бұрын

Have been using these for several years now. Only thing I've found to keep in mind is make sure to attach the mount to the wall high enough that if you lose pressure in your tyre, the mount will still hold the bike. If the rear tyre contacts the ground, the bike can fall out. And in my case damage the paintwork on my car

@5t341tH 2 күн бұрын

I started riding this loop with my mtb and recently did it on my trek domane. I’m definitely not as confident taking the descents on the domane 😅

@larp4474 2 күн бұрын

Is m7120 slx crankset fit on 83mm bb shell width?

@taiwanlife6531 2 күн бұрын

Great, I've ordered it. But 25USD for shipping to Taiwan 😱.

@TheBikeSauce Күн бұрын

Sheesh. Sorry about that. We’re not marking up shipping at all - if anything we lose some on shipping

@angelojumigop346 2 күн бұрын

Can i use boost crank on non boost frame?

@TheBikeSauce Күн бұрын

You can

@Gutenmorgan92 3 күн бұрын

Toasty Rides and Wavy Wheelies (NZ) Blue Lug and Brotures (JP)

@automat8 3 күн бұрын

Sorry. You did that. I didn't wait for the end of the video. Thanks! That looks like a great place bike. I'm thinking of doing the Mammoth Tuff or WTF this coming year. Would you rec one over the other?

@automat8 3 күн бұрын

Thank you Nolan. Would it be possible to got into what were the specific adjustments Steve made?

@thomasr1051 3 күн бұрын

This is actually really elegant

@fayswan69 3 күн бұрын

The constant rubbing on my forks because of how close the ratcheting arm needs to be to the fork so it doesn't loosen up is annoying for a $700 bike rack.

@七舅姥爷-v8q 3 күн бұрын

Mind if you could disclose how much in total you spent on all these updates?

@DebonairOnline 3 күн бұрын

I got lucky and found a used set of 4 steady racks for $100 locally. I have them staggered high and low to take up less space. I use my knee on the back of the saddle to lift bikes to the higher ones like you did.

@davidgarza2267 3 күн бұрын

Yeah, those end caps are terrible. One set went on fine, the other had me questioning my manhood. Only other gripe is with the mtb rack. The base plate of the rear tire holder should be wider. When I set the tire on the side in order to swing the bike to the wall, the tire does come into contact with the wall quite a bit. Got a nice black spot on the wall from the tire markings.

@johnm7963 4 күн бұрын

Pretty soon the drive-side hip will get dislocated on each pedal stroke

@_mr_benjamin_ 4 күн бұрын

Would 29”/700c wheelset fit with the correct tire size?

@theLAngeles1 5 күн бұрын

You helped me alot

@TrentSiggard 5 күн бұрын

I just got these racks too & they're great!

@bikebudha01 5 күн бұрын

I have 8 steady rack mounts, they are fantastic. I have no ramp, but it's still super easy to lift the bike up to the higher mounts.

@JeremyCook 5 күн бұрын

The swivel is really a nice feature. I've got a similar DIY setup, but it doesn't have that function and it can get tight.

@brettk9265 5 күн бұрын

Obviously you've been hanging them from the front wheel for a while but any concerns with damaging the stanchions? Same argument for not using tailgate pads.

@davidsnow5811 5 күн бұрын

These look more carbon-rim friendly than the usual hook solutions too. Beyond the 'scraping' issue of your homebrew setup, some products I've seen put the hook in a place where there's a lot of leverage placed on the rim.

@vitormachado79 6 күн бұрын

I’m upgrading my wife’s Rockhopper, she has no idea why or how much it will cost. Started with an air fork, 10 speed deore groupset, bb and chainring, lighter tires and better hubs. Breaks are new too. I think now the bike is ready for me, e mean, for her 😊

@TimR123 6 күн бұрын

One other thing that's nice about this design is that you can easily get the bikes closer to the wall. Just pivot them over and they don't stick out as far. We had some in the office and it was nice to not have all the bikes sticking out into the hallway so much. Load up and swing over.

@millermiller75 6 күн бұрын

What happens when you get a new bike?

@TheBikeSauce 5 күн бұрын

Stack it in the other side of the garage with the other nine 😆 Jk. If you’re referring to the height of the rack, any new bike I’d get with probably be about the same wheel base so it should fit just fine

@hansonwang2121 6 күн бұрын

I love my steady racks! I have two of them and they are amazing to save space in my small garage.

@jimp65 6 күн бұрын

I was told recently from a bike shop that hanging your bike from the front wheel can allow air to migrate from the disc brake reservoir into the brake lines, I don’t know if this is possible, but it seams plausible. Any thoughts on this theory!

@hansonwang2121 6 күн бұрын

It can happen but it’s only an issue if your brakes have a poor bleed in the first place and you continuously pull the brake levers when the bike is vertical.

@TheBikeSauce 5 күн бұрын

Agreed. That Santa Cruz has been hanging for a year and brakes are fine. No change

@BikeNorthSeattle 6 күн бұрын

1 - Love the ramp, great idea thanks for sharing it 2 - I have dedicated bike hooks, but with my 29+ bikepacking bike it's always a fight to get it onto the hook, between the fat 2.6in tires and wide 50mm jones rims. It works, but it's a pain in the butt. Will have to give one of these a try. I think this will work so much better.

@galenkehler 6 күн бұрын

If you're running proper 36cm handlebars on each bike, then you'd fit every one within 16" stud spacing without overlap 👍

@davidcrowson4745 6 күн бұрын

⭐ ⭐⭐⭐⭐

@732002 6 күн бұрын

Not for PNW and fenders.

@slowcyclist4324 6 күн бұрын

There are options for that. The aero bike version of the rack is designed to take fenders too

@polipop1113 6 күн бұрын

Does it work with fenders?

@TimR123 6 күн бұрын

We had some at my office that worked with my fendered commuter... JUST. 🙂 I could hear the rack sliding on the inside of the fender. But I never saw any damage. The "ebike" version seems a better answer if you have fenders

@TheBikeSauce 6 күн бұрын

The ebike rack does

@markday1714 6 күн бұрын

is there a downside to hanging off the ceiling via the rear wheel?

@TheBikeSauce 6 күн бұрын

Having to lift the bike 🤷‍♂️. And if your ceilings are higher up

@acidbath666 6 күн бұрын

I know you're prolly using the new racks, but quick tip for the rubber wearing off on the cheaper hooks, save your old bar tape for that. That's what I use mine for.

@TheBikeSauce 6 күн бұрын

Dam good idea!

@mattkavanaugh5623 3 күн бұрын

I wrapped my hooks with duct tape where the plastic was wearing off

@BillSmithPerson 6 күн бұрын

Where do you put your other 8 bikes?

@TheBikeSauce 6 күн бұрын

😆😆😆 oh you know.. here and there

@nkantar 6 күн бұрын

The real video we all want to see… 😂

@layspeed 6 күн бұрын

Yeah I looked at the steady rack but I've got way too many bikes. Went with a DIY sliding track with hooks instead. 10 bikes within a 10' wall space works well for me.

@subliminalfreedom 6 күн бұрын

That ramp is genius

@bespey 6 күн бұрын

The ramp is the best part of the video

@TheBikeSauce 6 күн бұрын

😆 I’ll take it

@jazzfan7491 5 күн бұрын

Just watching you lift that bike makes my back hurt. The ramp is a great solution

@CharlieMetcalf 6 күн бұрын

Follow inatructions??? I never do that!

@TheBikeSauce 6 күн бұрын

😀 trying to set a good example here

@bikecow 6 күн бұрын

I've been using Steady Racks for years and they are solid. I always worried the hook setup would damage/warp the rim in some way if left for too long, and Steady Rack fixes that.

@JRmntain 6 күн бұрын

A lot less force than when you ride it.

@zoomin385 7 күн бұрын

After looking through the comments, it seems that the rd-rx822 pull ratio is not "perfectly" compatible with the road 11-speed levers (r5800, r6800, r7000, r8000, rx600, rx810), but rather "slightly" compatible. The pull ratio is estimated to be around 1.3. It seems to be an ambiguous compatibility where it may work if you set it up right, but may not work if you don't.