Do you by chance make these if so if like to purchase one

Mostly I did research on dr. pulley and ask a friend about it he told try it out so I put in 17 x 21 11.5g on my 2007 Piaggio mp3 250ie because I been restoration every since I found on Facebook market it been sitting in garage every since 2018 and only have 3089 miles on it! I till have replaces all brake pads & parking brake cable and front hub bearing and regrease everything because I had replaces all 3 tires and rear bearing looks almost dry out it been 4🤔years and till have not finishing it yet! 🤣

Hello, why there is problems with belt on vespa gts300 with dr pulley, if it's exactly the same as stock🤔? Thx

Is it safe for the battery to continuously plug in the elm module? Or do I only plug it when needed?

Dr pulley rollers made weaker my ntorq on uphill, thats why i dont recomend.

Use gps meter is better to know ur upgrade work or not

I used 15g Dr. Pulleys and the take off I have now is absolutely scary! 🙈 She almost pulls a wheelie, and for those of you familiar with the Yamaha Majesty yp400 CVT transmission; you know that is an impposible feat. Your caliper and micrometer must be broken! 😉

Hola nessesito reparar la suspencion delantera

Can I buy it from you? a few pieces?

good morning, the oil you will use is 10w30 honda???? the valvoline 80w90????

Dzięki.

Sadly the link doesn’t work anymore

Not a good 'conditional' charger though, when you get to 85% full you want to start reducing the current to the battery

I can tell you that I have put Dr pulley sliders in a Honda Helix, Burgman 400 and Yamaha Majesty and in each bike they made a big difference in exceleration and lower cruising rpms, it could be that either something went wrong during your setup or you did not find the proper slider weight for your application, once you do youll notice a difference

Im annoyed with my dr.pulley. 2 pieces always flipping so i always open the variator to fix the position. Can someone help me how to fix it?

neat. nice content

So which is the best spring to use?

Cách này hiện nay không được

Without modification, DRP won't increase your top speed. Just a simple 0.5mm milling to the movable front pulley base will make a big difference. You should have noticed that with DRP, the limit to the highest ratio is not limited by the pulley slider groove anymore, but rather by the pulley face. You can check this by looking at the metal around the O-ring face, they will leave some mark with DRP. Simply mill the face by 0,5mm and press the O-ring deeper (or make it seats deeper if it's not possible) you will increase the pulley travel by 2mm. I always do this to all my Honda scooter (those 110cc, 125cc, 150cc variants). I always get DRP with slightly lighter weight, and with this mod I get faster acceleration, slightly more top speed, and as mentioned in the video waaaaaaay longer slider/roller life. My Honda Vario 150 originally used 15.5gr for each roller, I changed to 14gr DRP. I replaced my last one (Vario 150cc) after 62.000km with no significant wears (approximately 0.2gr for each, less than the new one). The only downside with lighter slider is you lose some fuel mileage (but more fun times) 48km/liter instead of the original 51-52km/liter.

Can u resurface them when worn?

Hi I can not find the STL file on thingiverse.. please can you share it somehow? I would like to print the key myself. Thank you!!

If no improvement using this roller, then why after install my new nmax opens the vva earlier? Usually with stock roller 13grams it opens ariund 74 / 75 kmh... This when riding smoothly. But after i install the dr pulley rollers also 13grams( weight check ech) my nmax open vva at 64kmh... It means it reach rpm 6000 earlier. Everything else is stock, only the rollers. I'm more towards economy riding for better fuel consumptions & mileage, so after install the dr pulley rollers it feels less economy in fuel consumption.. riding style still the sam, lets see this few days to see how it performance Maybe still new & fit in the pulley housing. If it still no changes, might use original rollers back which has better fuel consumption.

how bout stock to 15T conversion do you have?

In your custom setup from kenzo matic, did you also extend the roller path by making the end softer?

Where can i get them?

What.is.good.for some low end

Hallo, I tried with Honda nc750x 2015 but it doesn't work, it can't find the communication protocol. Can you give me some help? Thank you

hi there. you rent the motor in Thai ? how about the international license?

Hi, just saw your video and want to know how long it takes to walk inside the cave? i plan to go there

U sell in amazon shop? Make link online?

I drive a Honda Forza 350, how many grams would you put dr pulley or tech pulley so it doesn't lose top speed?

This final ratio 53 where can buy?

Will say one thing they (Dr Pulleys) last longer

Thanks for the content

share it my friend please

will elm327 work with xadv 2019 model?

nice one bro. did you purchase the connector at Sim Lim? or online?

Great 👍 thanks

Or, just get a portable battery pack and plug it in to your cardo while riding. Has worked for me for years.

Is it okay to leave the obd2 scanner always connected to the adv?

Will I lose my starting acceleration when I switch my gearing to 17t?

Dr Pulley any day any time if you treat m well they will last and last and last i use synthetic grease lightly and five years in my Piaggio mp3 400 still verry little wear . lower rpm lower fuell consumption well depends on your throttle hand offcourse lol bot normal round rollers just suck after a few months they already have a flat surface no matter what brand the design is crap .My 2 cents

Is the wiring same with other brand obd2?

My aprilla sr150 not going speed from 40kmph what's problem

My aprilla sr150 not going speed from 40kmph what's problem

Hi Malex, sale me the just the 3d printed case ill take 2 shipped to the USA. What do you say? :)

Unique po ba ganitong mga emergency key nawala din sakin adv 150 pati barcode? Imean pag bumili ako ng key lang online or manghiram gagana po ba para mabukdan seat compartment ?

Hi bro, can i order? From singapore

Good video, interesting and informative. Good to know the Dr Pulleys last a lot longer, especially (I’m guessing) for those of us with Chinese scooters and thus cheaper parts including rollers.

Bro Pde mag pa gawa ng ganito?